Used Hurco Vmx 50 for sale (155)

Condition: excellent (used), Year of construction: 2007, operating hours: 2,777 h, functionality: fully functional, Controller ULTIMAX 4 DSM Table size 762 x 355 mm X-travel 660 mm Y-travel 356 mm Z-travel 456 mm Spindle speed 10000 rpm Tool holder type SK40 ATC-Magazin 16-fold Spindle power 11/9,4 kW Weight 2800 kgs Dimensions LxWxH = 1800 x 1600 x 2500 mm Accessories, features - Software options: DXF, rigid tapping, pocket/island, herical/ramp - Chip auger - Coolant tank Nedpfx Ahezbx Dpofecu - Machine mounths - RENISHAW zero point presetter system with touchprobe - Some SK40 toolholders - Towel lamp The machine has been checked by HURCO engineer. RENIOSHAW ballbar test has been made on X-Y axes and shows 13 um (like at new machine). Original spindle hours 2777!!!! Very good condition.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Ncsdpfezc Icwjx Ahfeu Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Condition: used Machine is complete Inspection possible while powered on Ncjdpfoy T Hkpex Ahfeu

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Ncsdpfxstrhq Hs Ahfou Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Ncjdpfx Aew Nklhjhfou Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. Nodpezcpu Iefx Ahfjcu This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min Ncsdpfx Ajvh Nbuohfsu rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg Ncsdey T Ekbepfx Ahfsu

Year of construction: 2002, condition: ready for operation (used), Hurco VM 1 machining center Spindle speed max. 8000 RPM Travel: X: 660 mm Y: 406 mm Z: 508 mm Spindle: 2000 hours Complete software options, DXF, thread cutting without collet Ncodpfx Aji E Iacohfsu Various tools included, Hilma vise, drawer cabinet with tools.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Ncodjp I Hanopfx Ahfeu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Nodpfx Aerxfxhshfocu Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Njdsw Tdiuopfx Ahfocu Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: new, functionality: fully functional, New joystick as a replacement for Hurco Ultimax 4 trackball. For sale is a new joystick suitable for Hurco CNC controls with Ultimax 4. The joystick replaces the original Hurco trackball and is an ideal modern, robust alternative if the trackball is defective or inaccurate. Installation is easy and can be completed within a few minutes. No special technical skills are required. An installation video guide is available online (search on YouTube: "HuStick4 - Joystick passend zu Hurco Ultimax 4"). Ncjdoy N Eppopfx Ahfju

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm Nodpfx Aoy Du I Rehfecu X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: used, Year of construction: 2015, functionality: fully functional, Travel distances X-axis travel: 290 mm Z-axis travel: 560 mm W-axis travel: 640 mm Y-axis travel: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. swing diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feedrates X-axis feedrate: 24 m/min Nsdpfx Aey Dgfbohfscu Z-axis feedrate: 30 m/min W-axis feedrate: 30 m/min Y-axis feedrate: 12 m/min Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Index time: 0.16 s Sub Spindle Sub spindle max. speed: 6,000 rpm Sub spindle torque: 70 Nm MACHINE DETAILS Electrical connection values: 66 kVA / 95 A / 400 V Pneumatic connection values: 7 bar / 150 l/min Weight: 7,000 kg Operating hours Power-on hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channels Chip conveyor Tool measurement arm (Tool Setter) Transformer Cooling unit Coolant tank Fixed and driven tool holders Replacement main spindle (unrefurbished) Various collet chucks, size 65 Documentation (circuit diagrams, operator's manual, etc.)

Condition: used, Year of construction: 2007, controller model: Ultimax, table width: 355 mm, table length: 760 mm, number of slots in tool magazine: 20, HURCO VM1 Vertical Machining Center The HURCO VM1 is a compact vertical CNC machining center, ideally suited for precise milling operations in single-part and small-batch production. The machine stands out for its robust construction, user-friendly control system, and efficient tool changing capability. Technical Equipment Worktable: 760 mm × 355 mm Equipped with machine vice CNC control: Ultimax Automatic tool changer with 20 tool positions Machine Condition and Design Ncodpfoyxcykjx Ahfsu The machine features a fully enclosed safety cabin with large front windows. The control panel, including a display, operation keys, and emergency stop, is mounted on the side for ergonomic access. A chip collection tray is located beneath the working area. Thanks to its compact footprint, the HURCO VM1 is especially suitable for workshops with limited floor space, while still delivering high performance and flexibility.

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Year of manufacture: 2011 Nodexg D A Hjpfx Ahfocu

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale here. Njdpfxjyhw Eao Ahfocu Travel: X-axis: 1270 mm Y-axis: 510 mm Z-axis: 510 mm Control: Max5 Taper: SK-A40 Max spindle speed: 12,000 rpm Transport weight: 4,550 kg If interested, please call. Sale on behalf of customer.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco Njdpsydqpijfx Ahfscu turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 346 h, number of axes: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max turning diameter: 508 mm • Max turning length: 560 mm • Max part diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max driven tool speed: 5000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Main spindle max speed: 4500 rpm • Sub-spindle max speed: 6000 rpm Nodpfx Aoym T Itshfecu • Synchronous spindle speed: 2500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar capacity: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short circuit rating: 5 kA RMS symmetrical • Interrupt capacity: 10000 A • Max ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7500 kg • Transport weight: 8250 kg • The BMT65 mounts are included; swivel mounts are not.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,500 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 1,800 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM30I was manufactured in 2019. It features a table size of 1320 × 508 mm and a maximum table load of 1,800 kg. With an impressive X travel of 1270 mm, Y travel of 508 mm, and Z travel of 508 mm, this vertical machining centre is designed for high-quality machining capabilities. Consider the opportunity to buy this Hurco VM30I vertical machining centre. Contact us for further details. • Table size: 1320 × 508 mm • T-slot size: 5 × 18 mm • Max spindle torque: 82.3 Nm @ 1740 rpm • Tool changer: 24-position random arm ATC • Max tool diameter: 80 mm • Max tool length: 250 mm • Rapid traverse: 28 m/min • Through-spindle coolant: 20 bar • Spindle chiller • Control: WINMAX 5 CNC with dual screens Ncjdpfx Ahoyq Nz Rofju • Air-conditioned electrical cabinet • Electronic handwheel • RJ45 & USB ports • 3-color status light • Coolant and air guns • Dimensions: 4100 × 2500 (3300) × 2550 mm • Condition: Excellent Additional equipment • Screw chip conveyor • Machine vise • Set of tool holders • 3D probe • Documentation (CD-ROM) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) Ncedox H A I Rjpfx Ahfsu • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting • ISNC extended NC mode

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Njdpoyap Tfjfx Ahfecu Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: used, Hurco VM30 Vertical Machining Centre. New 2012 Machine ready with transit clamps in position. Specifications: X: 50" Y: 20" Z: 20" Power: 20 hp RPM: 10,000 RPM # ATC: 20 Table-W: 52" Table-L: 18" Nedpfex Rkyvjx Ahfscu

Condition: used, Year of construction: 2006, 2006 Hurco VM1 Vertical Machining Centre YOM: 2006 Technical Information – Hurco VM1 VMC General Data Measurements width: 1800 mm Measurements depth: 1900 mm Measurements height: 2600 mm Machine weight: 2700 kg Main drive Number of spindles: 1 Spindle speed range: 40-8000 1/min Spindle motor power: 11 kW Movement Ncsdpfx Ahov Suwiefju X-AXIS Movement: 660 mm X-AXIS Working Feed: 8 m X-AXIS Rapid traverse: 20 m X-AXIS Accuracy: 0.005 Y-AXIS Movement: 350 mm Y-AXIS Working Feed: 8 m Y-AXIS Rapid traverse: 20 m Y-AXIS Accuracy: 0.005 Z-AXIS Movement: 450 mm Z-AXIS Working Feed: 8 m Z-AXIS Rapid traverse: 20 m Z-AXIS Accuracy: 0.005 Workpiece Workpiece weight: 350 kg Table Outer length: 762 mm Outer width: 356 mm Delivery & Siting available at extra charge – Please ask for price.