Used Hydraulic Joystick for sale (17,134)

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter Fedpsv Dm Epofx Al Uepn With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: good (used), For sale: a complete set of Weber-Hydraulik hydraulic rescue tools. The set includes a SP-40 hydraulic power unit, cutters, and a spreader. The entire set is mounted on a metal transport frame and equipped with reels containing hoses. The set has been inspected and is in 100% working order. The visual condition and detailed scope of equipment are shown in the photos. Fjdpfx Asvgnr Aol Uepn Data read from the nameplates: Power unit manufacturer: Weber-Hydraulik Power unit type: SP-40 TÜV marking: SP32-95-TP18/SP30 Engine: ATB AKF 90S/2F-12R Engine power supply: 230 V, 50 Hz Engine power: 1.3 kW Rotational speed: 2760 rpm Engine protection rating: IP54

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Fodpfx Asz Rnn Tel Ujpn Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: excellent (used), outer diameter: 400 mm, Used hydraulic 3-jaw chuck from the Italian manufacturer SMW, model Autoblok 400BH. Fpodjz Rlx Nopfx Al Uen The set includes the parts shown on the attached photos: chuck, clamps, screws, and hard jaws

Condition: good (used), functionality: fully functional, Year of construction: 2010, Hydraulic sheet metal shear Manufacturer: ATLANTIC, Type: ATS 2012 Year of manufacture: 2010 Technical data Manufacturer: ATLANTIC Type: ATS 2012 Year of manufacture: 2010 Sheet metal size: 2000 x 12 mm Shear angle adjustment: 0.5 – 3 degrees Working height: 900 mm Motor power: 22.5 kW Dimensions: approx. L 3.20 x W 1.50 x H 2.30 m Weight: approx. 8 t Equipment • Angle stop • Support arms • Manual shear gap adjustment • Automatic shear angle adjustment • Motorized backstop All information is subject to change without notice. Fsdpfx Aoz Ny Ntol Ujpn A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg Fjdsz Ny Ddepfx Al Uepn

Year of construction: 1986, condition: good (used), functionality: fully functional, machine/vehicle number: 540, SANDT 540 – 50 Ton Hydraulic Double-Column Press – 1350 × 600 mm Good quality German-built SANDT 50-ton hydraulic press, now available from our premises in Kent, England. A substantial industrial machine offering a large 1,350 × 600 mm working area, approximately 500 mm maximum stroke and 680 mm installation height. Suitable for a wide range of industrial cutting, die-cutting, punching, forming and manufacturing operations. Specification: 50-tonne press force 1,350 mm column width 1,350 × 600 mm table 1,350 × 600 mm ram Approx. 500 mm max. stroke Approx. 680 mm installation height 400 V Safety light curtain Separate hydraulic power pack Fpjdsz Icrtepfx Al Uen Separate electrical cabinet Approx. 3,000 kg Approx. dimensions: 3,000 × 1,200 × 2,800 mm Manufacturer: SANDT Model: 540 Year: 1986 Machine No.: 808673-72951 Price: £5,000 or best offer Machine can be inspected in Kent, England. Buyer to arrange collection/transport. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks,

Condition: ready for operation (used), Year of construction: 1990, Available immediately ex-yard: Fpjdpfxez Ixmmj Al Usn Hydraulic plate shear Durmazlar Type AGH 3 M 20 Year of manufacture 1990 Cutting length 3020 mm Material thickness up to 8 mm Hydraulic hold-down clamps, 16 pieces Drive power 20 HP Electrically controlled back gauge, 1000 mm Weight 8 tons Price: EUR 5,000.00 plus VAT, ex-yard.

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Technical data: Fpjdpfxezw Dt Hj Al Uon - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - Includes: - Foot switch - Cutting line illumination

Condition: good (used), operating hours: 1,995 h, sheet thickness (max.): 6,040 mm, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Fodpsz Rn Adofx Al Ujpn

Condition: good (used), Year of construction: 2016, machine/vehicle number: 163231001, Technical data: Fpedpfoz I Rkdjx Al Uon - Saw blade dimensions: 3375 x 27 x 1.1 mm - Cutting speed, continuously adjustable: 18 - 100 m/min - Hydraulic cutting pressure control - Hydraulic lifting and lowering of the saw frame - Machine table can be swiveled to the left and right for miter cuts - Cutting range - at 90°: round 255 mm - square: 240 mm - flat: 300 x 180 mm - at 45°: round 210 mm - flat: 200 x 160 mm - at 60°: left, round 135 mm - Max. opening width of the vise: 310 mm - Drive: 400 V / 2.2 kW - Space requirement: approx. W 2000 x H 1500 x D 2100 mm - Weight: approx. 990 kg - Includes: - Infeed roller conveyor: 5000 mm - Outfeed roller conveyor with measuring stop: 5000 mm

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Fpodpfxocmat Us Al Usn Mechanical compression setting more photos an questions

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit Fpedpfx Aji A S I Sol Uon - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed Fpodpfxji A S I Do Al Ujn adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: new, pressure 60 t stroke 380 mm Fodoi A S I Ijpfx Al Ujpn table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, MORGAN RUSHWORTH GUILLOTINE MODEL HSG 4100/6 4100 X 6 MM CAPACITY ELGO TOUCH AND GO BACKGUAGE GUARDS FRONT AND REAR FRONT SUPPORTS SQUARING ARM Fodpez Ehr Tjfx Al Uepn BLADE GAP RAKE ADJUSTMENT WONDERING FOOT PEDAL YEAR 2007 MORE PHOTOS ON REQUEST

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Fpedpfoz Izmcsx Al Usn Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 650 t, stroke length: 400 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Fpodpfxsv Hpnlo Al Usn Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Fpjdez Rk Ntepfx Al Usn Automatic knife return from any position Transparent cover on the rear table Laser cutting indicator Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Fpsdpov E Efdjfx Al Uen Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, MORGAN RUSHWORTH GUILLOTINE MODEL HSGS 3100 X 6 MM CNC CONTROL - CYBELEC CYBTOUCH 6 YEAR 2016 FRONT AND REAR GUARDS SQUARING ARM FRONT SUPPORTS BLADES EXCELLENT Fsdpez Ehtwjfx Al Uspn BLADE GAP IN EXCELLENT CONDITION , ONLY USED ON LIGHT MATERIAL SINCE NEW CAN BE VIEWED AT OUR WORKS OR A VIDEO CAN BE SENT

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. Fpodjz Rki Tepfx Al Uen This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Fpedpfx Alszwylxe Usn Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No Fpjdszry Icspfx Al Uon - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Discharge size: 3–50 mm Capacity: 45–1200 t/h Fpodjtxhybopfx Al Usn Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.