Used Hydraulic Piston for sale (17,614)

Condition: new, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, documentation/manual, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. CE approval, including electromagnetic compatibility. Fjdpfx Ajfh R Nyem Eegi Ram stroke: 310 mm Internal width: 1,010 mm

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Fsdpfxo Adu Ulj Am Esgi TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, pressing force: 1,600 t, stroke length: 1,600 mm, oil tank capacity: 3,500 l, total height: 6,900 mm, overall weight: 72,000 kg, Engines: Main engine approximately 55 kW, 2 HD pumps each approximately 4.5 kW. Fjdpfj Aibbtex Am Eogi

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. - Hydraulic cutter. - Spreader. Fgodpsz Skxxsfx Am Eji - Hydraulic pump.

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. - Hydraulic cutter. - Spreader. - Hydraulic pump. Fgjdpfxez Skyps Am Eji

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T Fedpfxo Aihzdo Am Eegi

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Fgedpfxsz S Uxhj Am Eji Two-hand control or foot pedal operation. Equipped with an additional safety guard.

Condition: used, Year of construction: 1978, Hydraulic Shear SAGITA BEYELER 3100 x 4 mm Cutting length: 3100 mm Maxi thickness: 4 mm Electric Back gear gauge travel: 1000 mm Fgedpfx Aj Aihzaom Eei Throat depth: 300 mm Year of construction: 1978 13 hydraulic sheet-metal clamps Blue electrical cabinet not used because it was used for the rear sheet metal conveyor There is a slight hydraulic leak at the left cylinder Supplied with a new replacement blade + front stop Voltage: 380 V Length: 3700 mm Depth: 2400 mm Height: 1500 mm Weight: approx 5 T

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder - Hydraulics, electrical design, and controls - Software for setting and storing various parameters In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project. Fjdpfe Ah El Sox Am Esgi

Condition: excellent (used), BAYKAL HNC 4100 × 10 Hydraulic Guillotine Shear Year: 2006 Serial number: 9756 Equipped with a 22 kW main motor and 260 bar hydraulic system, this machine is suitable for medium to heavy-duty sheet-metal processing and fabrication applications. Fgedps Aidzzjfx Am Esi Technical specifications: Cutting length: 4,100 mm Maximum cutting capacity: 10 mm St42 steel Main motor: 22 kW Electrical supply: 380 V / 50 Hz / 3 phase Hydraulic pressure: 260 bar Cutting speed: 15 strokes per minute Machine weight: 14,600 kg Overall dimensions: 5,000 × 2,740 × 2,400 mm Manufacturer: Baykal, Bursa, Turkey Machine offered following cleaning, servicing and operational inspection, subject to completion of the stated work.

Condition: good (used), For sale: a complete set of Weber-Hydraulik hydraulic rescue tools. The set includes a SP-40 hydraulic power unit, cutters, and a spreader. The entire set is mounted on a metal transport frame and equipped with reels containing hoses. Fgedpfsz Skyijx Am Esi The set has been inspected and is in 100% working order. The visual condition and detailed scope of equipment are shown in the photos. Data read from the nameplates: Power unit manufacturer: Weber-Hydraulik Power unit type: SP-40 TÜV marking: SP32-95-TP18/SP30 Engine: ATB AKF 90S/2F-12R Engine power supply: 230 V, 50 Hz Engine power: 1.3 kW Rotational speed: 2760 rpm Engine protection rating: IP54

Condition: used, Hydraulic Shear COMESSA type CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T Fgedpfxe Aihy Is Am Eei

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 400 h, table height: 770 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 750 mm, overall weight: 4,500 kg, total length: 3,640 mm, total width: 2,550 mm, total height: 1,575 mm, Equipment: CE marking, angle stop, documentation/manual, finger protection, type plate available, Very well-maintained hydraulic plate shear Haco TSX 3006 with only a few operating hours. Manufacturer: Haco Type: TSX 3006 Year of manufacture: 2018 (acquired: 2019) Operating hours: approx. 400 h Cutting length: 3,050 mm Sheet thickness: 6 mm Cutting angle adjustment: 0.5 - 3 degrees Clamps: 18 pieces Length of back gauge: 1,000 mm Motor power: 7.5 kW Dimensions (L x W x H): 3640 x 2550 x 1575 mm Weight: approx. 4.5 t - Control system: SC 100 T touchscreen control - Blade gap adjustment: Automatic - Rake angle adjustment: Automatic - Safety equipment: Type II finger protection with moulding, CE certified - Light curtain system and safety fences included A suitable material trolley for collecting the finished sheets is included in the scope of supply. We will gladly send you a video of the machine upon request. The machine can, of course, be inspected while powered on and thoroughly tested. Fsds Ahq Atspfx Am Eegi The sale is to commercial businesses, excluding any warranty for defects. No guarantee, warranty, or right of return. Net price.

Condition: like new (used), Year of construction: 2023, operating hours: 180 h, functionality: fully functional, machine/vehicle number: ITR1822394, total height: 1,800 mm, space requirement length: 800 mm, space requirement width: 800 mm, space requirement height: 1,800 mm, motor manufacturer: Otto Klein, power: 52 kW (70.70 HP), operating pressure: 30 bar, type of cooling: air, For sale is a professional high-pressure compressed air station from Atlas Copco, model LT7-30UV BM. The unit was manufactured in 2023 and is in excellent, almost as-new condition. With only 179.9 operating hours, the machine is barely broken in. The LT series from Atlas Copco is the benchmark for industrial high-pressure applications and is renowned for its extreme durability, low operating temperatures, and long service life. A particular highlight is the premium, hot-dip galvanized 350-liter air receiver, specially designed for high-pressure use (up to 36 bar operating / 51.5 bar test pressure) to offer maximum corrosion protection. Technical Data Manufacturer: Atlas Copco Model: LT7-30UV BM Year of manufacture: 2023 Condition: Excellent / Nearly new Operating hours: approx. 180 h Max. operating pressure: 30 bar (435 psi) Free air delivery: 6.4 l/s (~ 23 m³/h) Motor power: 5.16 kW 400V / 3 phase / 50 Hz Speed: 1,500 rpm Receiver: 350 liters, hot-dip galvanized Certifications: CE, EAC, UKCA Reference number: 8115460928 Serial number: ITR1822394 Fsdpfsy Anb Iex Am Ejgi On request, transport and loading can be arranged Europe-wide for an additional fee. Price plus VAT. Inspections available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your equipment? For further information or to get in touch, please visit our website.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. Fgjdpfxoz Rk Nyj Am Eji 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 100 t Machine weight: approx. 5.7 t Stroke and operating data Stroke: 0–500 mm Overhang: 310 mm Installation height: 1,130 mm Fodpfxj Acgcfj Am Eegi The installation height is specified with the stroke in the upper position. Table and ram Table surface: 800 × 650 mm Ram surface: 800 × 600 mm Through-hole in the table: 355 mm Table height above the floor: 800 mm Safety data Safety distance: 270 mm Follow-up measurement: 135 m/s Follow-up travel: 44 mm Dimensions Length: approx. 1.2 m Width: approx. 2.0 m Height: approx. 3.67 m EQUIPMENT Conversion to comply with new safety regulations

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working length: 2,000 mm Cutting capacity: 5 mm Stroke rate: 40 min⁻¹ Stroke: 115 mm Column overhang: 320 mm MACHINE DETAILS Manufacturer: Fischer Machine type: Plate shear Machine number: 623076 Length: 3,000 mm Width: 1,500 mm Height: 1,600 mm Fgsdpfo Ad Hvnjx Am Eoi Weight: 3,000 kg EQUIPMENT

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schoen Type: SH/LF100 Year of manufacture: 1985 Machine type: Hydraulic press PRESS Fodpfxs Adu Rye Am Ejgi Pressing force: 100 t Table dimensions: 1,200 × 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 3,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 12,000 kg

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fsdpfxs Ahrg Nj Am Eogi FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Fgedpo Ad H Ttofx Am Eji Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: ready for operation (used), Festo Didactic Pneumatics Workbench Learning System, Training Trolley with Accessories Accessories: see photos You are welcome to visit us for a viewing. We would be happy to arrange cost-effective shipping for you! Fgedpfs Aid Naox Am Eji You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Fgedpfx Aev Dm Epjm Eji Price € 3,950

Condition: good (used), functionality: fully functional, Year of construction: 2002, Used plate shear from Safan Type HT 430 16 Capacity 4300 x 16 mm Adjustable back gauge, cutting angle, and cutting clearance Pneumatic hold-down table at the rear for thin materials Includes square guide and support arms at the front Fodps Ahwt Isfx Am Eogi

Condition: good (used), Year of construction: 2002, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, Komatsu FD30 Triplo 450 Freelift / 3rd / 4th Function Diesel 2002 A video can be sent via WhatsApp. Fgods Aif Uljpfx Am Eji We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a viewing and/or test drive without obligation. Please call beforehand to make an appointment, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 1980, overall weight: 18,000 kg, Used plate shear from Safan Fjdpfx Amj Ahwpgo Eogi Type: VS 620 4 Capacity: 6200 x 4 mm Electric back gauge Manually adjustable cutting clearance and cutting angle Equipped with a pneumatic hold-down table at the rear Includes a square guide