Used Hydraulic Vise for sale (17,005)

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 12500 € 240 € 150 to fix 150 mm 780 mm 1000 mm 1900 mm 1200 mm 2450 (PSS: 2600) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Dedjxviu Tjpfx Ah Uskw Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00

Condition: used, Year of construction: 1994, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 3.0 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 5.0 - 750 mm oil volume 120 ltr. engine output 7.5 kW weight 6400 kg. range L-W-H 4045 x 1783 x 1750 mm Good condition (!!) According to the previous seller, with very few operating hours Djdjxaap Nepfx Ah Ujkw From a maintenance workshop Equipment: - Robust electro-hydraulic sheet metal shear * Design: Guide rail - LVD control panel centrally located on the front of the machine - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment * Adjustment from the front - via handwheel * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Continuously variable adjustment range * Analog position display * Rapid traverse possible - Ball transfer units + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating instructions * Special accessories included: - LVD movable sheet support device for thin sheet metal blanks - 1x LVD extra-long side stop (3.000 mm) with Support leg - 1x LVD used set of replacement blades

Condition: good (used), hydraulic pump for the hydraulic roller lifting Djdpfx Aeh D E I Reh Uekw

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Type: VS 255 4 Djdpfx Ahexrf Hwe Uokw Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: used, Hydraulic Spotting Press MILLUTENSIL Type BV 25 PM Machine No. 632 / 25111 Year of manufacture: 1991 Clamping force: 18 tons Opening force: 15 tons Table area: 775 x 760 mm Clamping area of upper table: 900 x 550 mm Column width: 900 mm Installation height max.: 750 mm Installation height min.: 230 mm Stroke of upper table: 520 mm Infinitely variable stroke speed: 0 - 1000 mm/min Adjustable hydraulic pressure: 10 - 200 bar Max. tool weight on table: 2500 kg Max. tool weight on upper table: 800 kg Table height above floor: 850 mm Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Upper table motor-driven, swivels 360° - Hydraulic ejector unit in the table with 120 mm stroke - M14 threaded holes in the table - Hydraulically extendable table - Depth adjustment bar for automatic downward stroke limitation Space requirements L x W x H: 1550 x 1500 x 2000 mm Weight: 1900 kg Dedpetx E Rdefx Ah Uokw

Condition: excellent (used), Year of construction: 2006, AMADA PROMECAM GS 630 CNC STOCK NO 01993 Hydraulic Shear with Amada Dkodjxvbguopfx Ah Usw Control Capacity 197kN. Stroke 160mm. Cutting Length 3,050mm. Maximum Thickness 6mm Mild Steel, 4mm Stainless. 40 ° Cutting Angle. Front Sheet Supports Approx 1,700mm Long. pneumatic rear sheet support system rear electronic guarding system Motor 5.5kW. S/No. C010603 year (2006).

Condition: used, Year of construction: 2013, Serial number: WLASKS343DMF6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21566 Specifications: 2013 model 3 Axles Swing on 3 axles Dksdpfexp Autsx Ah Uew Lift on 1 axle Ready for remote control and control box Air-controlled canopy Tires (see pictures) Rearview camera Ready for delivery   Description: We have a 2013 Langendorf 2 axle asphalt semi w/ Hydraulic canopy for sale. It is set up for remote control and control box. The trailer is EU approved and functions as it should. Ready for delivery Technical approved: Yes EU-approved until: 13.06.2026 Own weight: 10700 Model: 3 akslet asfaltsemi m/ Hydraulsik kapell

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50 /92-NG 600/15 kW/32Liter, pressing force: 130 t, operating speed: 80 mm/s, overall weight: 3,500 kg, Hydraulic straightening press Manufacturer: G +K Dedpfjxr Rnaox Ah Uokw Year of manufacture: 1992 Max. pressing force: 130 t Lower table size: 800 x 500 mm with T-slots Upper table size: 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 V AC, 24 V DC

Condition: used, Year of construction: 2004, Punching force: 500 kN Djdpfou Hza Dex Ah Uskw For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Weight: 1400 kg

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used hydraulic guillotine shear by Safan Model: VS 205 6 Dksdpsxrf Emsfx Ah Uew Capacity: 2050 x 6 mm Electric NC back gauge Rear safety guard

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) Dkjdpjxrgv Tsfx Ah Ujw - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Dkodpfxoxrtxuj Ah Uew Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: good (used), Jaw width: 250 mm Jaw height: 80 mm Clamping width: 230 mm Dimensions (W x D x H) approx.: 1000/770 x 250 x 190 mm Dksdpfxsxtvfge Ah Usw

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation Dkedjv Rwu Uopfx Ah Ujw permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 2009, Serial number: YY9SE51MX9T01xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20343 Specifications: - 2009 model - 3 axles - Lift on 1 axle - Friction steering on 3 axles - Lashings - Ready for delivery Description: We have a 2009 Damm SE-51M 3 axles Machine trailer w/ hydraulic driving bridges for sale. The trailer is Eu-approved until 02.09.26 and can be put straight into production. It works as it should according to the owner. Ready for delivery. Technical approved: Yes EU-approved until: 02.09.2026 Own weight: 9750 Total Weight: 51000 Dedpfswi Rlisx Ah Ujkw Payload: 41250 Width: 255 Length: 1360 Model: SE-51M 3 akslet Maskinhenger m/ hydrauliske kjørebroer

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Dkodpfsnl D Tfox Ah Usw Technical data: Cutting length 3100 mm sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: excellent (used), I sell a set of hydraulic tools for rescue Lukas. - Hydraulic shears. - Arm spreader. Dksdpfjvgnq Sox Ah Usw - Hydraulic pump.

Condition: good (used), functionality: fully functional, Year of construction: 1993, Working width: 3000 mm Cutting capacity: 12 mm Electric backgauge Backgauge capacity: 1000 mm Table height: 855 mm Length x Width x Height: 3600 × 2100 × 2250 mm Weight: 7,000 kg Djdpfx Ahsxrdllo Ujkw

Condition: used, Year of construction: 2008, operating hours: 15,498 h, 2008 | Sennebogen 850R with hydraulic rotating grapple | Used Material Handling Excavator | 15498 hours 📍Location: France, Revel 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Djdpfx Ahjxq T I Hj Ujkw 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 47 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine is operational with normal wear for 15,000 hours, some minor oil leaks. Turret brake needs inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Dkjdpfx Aex Ug Doh Usw Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: used, mileage: 801,000 km, Year of construction: 2006, Serial number: YV2AS50D26A61xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20470 Specifications: Djdswphxyopfx Ah Uskw EU approved until: 02.06.2025 Model year: 2006 Mileage: Approx. 801,000 km​ Gearbox: I- Shift Tires: See pictures Retarder Length: 675 cm Width: 250 cm Wheelbase: 321/ 137 cm Curb weight : 9,930 kg Drivetrain: 6x4 Engine power: 520 hp 2 beds in driver's cabin Cowcatcher Tool cabinet Extra lights Coffee maker Radio/ CD Air conditioning ( AC) Description:

Condition: used, Hydraulic press machine 6t, HARE 6 HP, 6 Tons, Used machine Manufacturer: Hare Type: 6 HP Overall dimensions: Dkedpfsxu Ev Dox Ah Usw Width: 1120 mm Depth: 1150 mm Height: 1940 mm Table size: 250 x 140 mm Stroke length: 100 mm Throughput: 440 x 80 mm Working pressure: 6.1 tons (60 KN) Year of manufacture: 2006 Electrical data: 400V; 3kW; Air pressure: 5.5 bar Weight: 620 kg

Condition: used, Year of construction: 1980, . 52965 pressure 10 t oil contents 110 Liter +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dodpsvxlr Dofx Ah Ujkw +++++

Year of construction: 1982, condition: used, sheet width mm Dkodpfx Aheq Dta Ij Uew plate thickness mm distance between columns mm digital working width 4500 mm 8mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 weight of the machine ca. 1 t Dsdovvx E Sspfx Ah Uskw