Used Hydroforming Press for sale (12,347)

Condition: good (used), Year of construction: 2004, machine/vehicle number: H7761, functionality: fully functional, operating hours: 9,655 h, power: 380 kW (516.66 HP), input voltage: 500 V, input current: 530 A, input frequency: 50 Hz, stroke length: 1,650 mm, operating speed: 68 mm/s, total length: 7,000 mm, total width: 5,000 mm, total height: 6,000 mm, overall weight: 288,000 kg, SCHULER SHC 1000 Hydraulic Press/Industrial Robot - Nominal force: 1000 kN - Maximum stroke: 1650 mm - Installation height: 2400 mm - Closing speed: 420 mm/s - Working speed: max. 68 mm/s - Working speed at nominal force: 21 mm/s - Tool base area: max. 3900 x 2400 mm - Tool base area: min. 1800 x 1200 mm - Tool height: min. 750 mm - Maximum total tool weight: 50,000 kg - Tool upper part weight: max. 25,000 kg Redpfezhuf Usx Ap Iow - Permissible load left/right: 800 kNm - Permissible load front/rear: 400 kNm - Includes industrial robot from the manufacturer KUKA, year of manufacture: 2002 - Control system: SCHULER Collection: upon request FCA D-73033 Göppingen - loaded onto a truck

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Rjdpfxszhlg Aj Ap Ijw Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 Rsdpfx Aezab Ibjp Ijw CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Year of construction: 1998, Press force: 250 t Frame width: 1350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1250x800 mm Side clearance: 640 mm Table height: 800 mm Rjdpfxozhupmo Ap Ijw Machine weight (approx.): 36,000 kg Space required (approx.): 3600x2800x5700 mm Maintenance/Service/Spare parts: - 2012: New display screen - 2017: Hydraulic pump completely overhauled - 2017: Sitema fall protection system renewed - 2018: New seals for the press cylinder - 2018: New seals for the control block - 2018: Oil change including tank cleaning - Annual UVV inspection of the press and safety devices

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm Rodpfxezhvaae Ap Ijw - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Nominal force: 500 kN (50 tons) Rsdpszh Nnwefx Ap Iew Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: used, Year of construction: 2007, operating hours: 74,000,000 h, MAN ROLAND 205 E0B • 5-color • Max. format: 520 mm x 740 mm • ProfitPlus Premium package including: - Double sheet feeder - Baldwin cleaning unit - Complete carton guide - EPL (Ergonomic Plate Loading) • Kersten antistatic system • Bacher register system • Powder sprayer: Grafix 72 Digital Plus • Alcosmart • PressManager Smart Interface • Smart R 200 Online • Remote control: RCI for ink and register Rodsytb Egopfx Ap Iow • ColorPilot Smart • Automatic wash-up device for: - Ink rollers, impression cylinders, blanket cylinders • Electronic sheet feeding control • Nonstop delivery • Delivery-side control panel • JobCard Reader • Carton device • In production • Location: Germany • Availability: immediately

Condition: used, Year of construction: 1993, Location: Malta Presona LP 50 VH Hydraulic Baler Presona LP 50 VH fully automatic horizontal hydraulic baler available for sale. The machine includes a hydraulic power unit, an automatic wire tying system, PLC controls, a pre-press and main press assembly. Suitable for OCC, paper, plastics, and industrial recyclables. Conveyor system not included. Sale Includes: Presona LP 50 VH horizontal baler Hydraulic unit Main press system Pre-press system Friction channel Automatic wire tying system Needle assembly PLC control system Hydraulic power pack Electrical control cabinet Bale ejection system Not Included: Conveyor system Machine Overview Main Technical Specifications Specification Details Manufacturer: Presona AB Model: LP 50 VH Machine Type: Fully Automatic Horizontal Hydraulic Baler Maximum Hydraulic Pressure: 25 MPa Press Force: 500 kN Power Supply: 220–600V AC, 3 Phase Rjdszhpa Tjpfx Ap Isw Control Voltage: 24V DC PLC Bale Weight: Up to approx. 800 kg Strapping: Automatic Multi-Wire Tying Operation: Continuous Automatic Operation Materials Suitable for Baling: OCC / cardboard, Waste paper, Newspapers & magazines, Plastics, Packaging waste, General recyclable materials Main Features: Hydraulic Pressing System Heavy-duty hydraulic main press Hydraulic pre-press system Adjustable friction channel pressure Continuous compaction operation Automatic Wire Tying Fully automatic multi-wire tying Hydraulic needle assembly Wire twisting and cutting system PLC Controlled Automatic operating cycles Error monitoring system Programmable material settings One-man operation capability Hydraulic Unit: The hydraulic system includes: Hydraulic pumps Oil tank Pressure regulation valves Oil filters Pressure transmitter Oil temperature monitoring Optional systems mentioned in the manual: Oil cooler Oil pre-heater Remote display Automatic Bale Tying System: The LP 50 VH features: Hydraulic needle assembly Automatic wire feeding Automatic twisting and cutting Multi-wire bale securing system Ideal Applications: Recycling facilities Waste transfer stations Cardboard recycling operations Plastic recycling plants Industrial waste processing Distribution & logistics centres Storage location: Customer

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Rsdpfey S Rqwjx Ap Ijw Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: Rsdpey R Nnfofx Ap Iew The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 2007, Bystronic EPII31-160 - CNC press brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control - Hydraulic crowning - Air bending - Includes numerous tools - Includes operating manual - Operating hours: 7266 - Number of bends performed: 315673 - Year of manufacture: 2007 Technical data - Capacity: 160 t - Table length: 3150 mm - Work table width: 60 mm - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke length: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Return speed: 95 mm/s - Upper beam tilt: +/- 13 mm - Crowning: Hydraulic - Air bending: Yes - Upper tool clamping: Manual - Die clamping: Manual - Number of fingers on the slide: 2 - X-axis range of the slide: 600 mm - X-axis travel: 600 mm - Min. X-axis travel speed: 400 mm/s - R-axis travel: 150 mm - R-axis traverse speed: 150 mm/s - Z1-Z2 travel: 2400 mm - Z1-Z2 traverse speed: Manual - X-axis accuracy: 0.1 mm - Y-axis accuracy: 0.01 mm - R-Z1-Z2 accuracy: 0.1 mm - Z1-Z2 accuracy: Manual - Above-floor installation: Yes - Machine dimensions (W x H x D): 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg Rodpfxoziduze Ap Isw

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 Rsdpfx Apezgfv Uj Iow MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Rodpsvviytefx Ap Iew

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Rjdpfx Apsvvkmbo Iew

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Redjvvkl Dspfx Ap Isw

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Rsdpfxszgvbus Ap Ijw Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available for you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,060 h, functionality: fully functional, Baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Rjdpfjy Ni Shox Ap Iow Note: The press is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. The hydraulic hoses should be replaced. We will gladly answer any questions you have about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available to you from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Bale press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Type: Dixi 80 SLD Rjdpfx Apsy Ni I Aj Iew Year of manufacture: 2017 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baling press Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Dixi Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 23 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Redpfx Ajy Ni Hrop Iow Weight: approx. 5220 kg Materials: Paper, cardboard, film The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. We will be happy to answer any questions you may have about the machine by phone, Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available to you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-strand, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film The press is in good condition. We will gladly answer any questions you have about the machine by phone, Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. Rsdjy Ni Dqspfx Ap Iow The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available for you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. Redpfx Ajy Ni Eusp Iew The sale is made against advance payment ex works, without warranty.

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min Rsdpey Nd Svsfx Ap Isw shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm Rjdpjy Nd Spjfx Ap Iew weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec Redpfx Apsyif Nre Ijw rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 2023, Press brake Type/Model: Dener PX 60320 Condition: Used Year of manufacture: 2023 Technical data: Main data and dimensions Press force: 3200 kN / 320 tons Bending length: 6,050 mm Distance between uprights: approx. 5,100 mm Stroke of the press beam: 350 mm Installation height: 650 mm Overhang in the side upright: 450 mm Hydraulic and drive system Main motor (power): 30 kW Hydraulic components from HAWE-Hydraulik or Bosch Rexroth Oil tank capacity: approx. 550 l Rsdpfx Apozhmnuj Iow Speeds Approach speed (Y-axis): up to 160 mm/s Working speed (bending phase): 10 mm/s Control and axes (standard equipment) CNC control: Standard with an ESA S 640 2D Standard axis configuration: 4 axes (Y1, Y2, X, R) Y1 / Y2: Independent hydraulic control of the two cylinders for precise parallelism X-axis (back gauge): Forward/backward movement (stroke usually 650 mm or 1000 mm) R-axis (back gauge): Height adjustment of the back gauge fingers Crowning: Integrated, CNC-controlled motorized table crowning for automatic compensation of deflection over the entire 6-meter length Weight and foundation Total machine weight: approx. 28,500 kg