Used Index Gu 800 for sale (159)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main and counter spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in control cabinet Hfsdpfx Adjylw Dcs Reg • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device • Optional: large number of powered tool holders and spare parts warehouse

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,971 h, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840C, number of axes: 12, This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 • Spindle pitch circle diameter: approx. 320 mm Hfsdpfx Adsyhpguj Rjg • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control system: Siemens SINUMERIK 840C (INDEX OEM) • Drive system: AC servo drives with SERCOS interface • Automation level: Fully automatic • Cooling system: Central coolant system • Lubrication system: Central automatic lubrication • Installed power: approx. 70–75 kW • Typical materials: Steel, stainless steel, aluminum, brass

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm Hfedeyailzjpfx Ad Rjg

Condition: good (used), Year of construction: 2006, Year of manufacture: 1998 to 2006 Available from current location Hfodpfsypltgox Ad Reg

Condition: excellent (used), Year of construction: 1998, Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hfedpfx Adswq Rwne Rog Parts conveyor, chips conveyor, available. Spindels bore 42 mm 2x 3 jaws chuck 160 mm 2x Hainbuch collets chuck 42 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Hfsdpfxsyx Tzro Ad Reg Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: used, Year of construction: 2017, INDEX - C200 - 2017 - system Sinumerik 840D SolutionLine - spindle bore 65 mm - cooling through cooling water - working hours between photos Hedjyzkp Ejpfx Ad Rjfg - used condition as shown on photos - under power, can be tested

Condition: used, Year of construction: 2003, Technical details: turning diameter: 270 mm Hfsdpfxsx Dlhlj Ad Rog turning length: 710 mm weight of the machine ca.: 6,5 t max. swing diameter: 590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Hfodpjynhd Ssfx Ad Rsg Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50

Condition: used, Year of construction: 1994, Technical details: turning diameter: 200 mm swing diameter: 260 mm turning height: 200 mm Tool table: 1054 x 400 mm Dimensions (L/W/H): 2200 x 2300 x 2300 mm weight: 3300 kg slide travel radial ( X-axis ): 520 mm slide travel axial ( Z-axis ): 200 mm Hedjyk Utrspfx Ad Rjfg no pallet circulating belt, no C-axis, no driven tools *

Condition: used, Year of construction: 1969, Automatic turret lathe brand: INDEX Hjdpfx Adeylht Us Rofg type: B60 new in: 1967 equipped with: 6x turret Thread turning device Material feed

Condition: used, 2x 6-spindle bar automatics as a package Make: INDEX Model: MS25E (1 machine defective, used as a parts donor) Hodpfxoylhlqe Ad Refg

Condition: used, Year of construction: 1987, 6-spindle bar automatic lathe Manufacturer: INDEX Model: MS25 Hsdpfxew S Hd Se Ad Rsfg Year of manufacture: 1987

Condition: used, Cnc multispindle lathe INDEX MS32C Hjdoxma Npepfx Ad Rjfg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Control: SIEMENS Spindle bore: 65 mm Hodpfx Asyi Uk Isd Refg Turning length: 660 mm Max. speed: 6,000 rpm Counter spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 rpm B-axis: 360° 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 230 / Y= ±65 / Z= 845 TOOL CARRIER 2 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 140 / Y= ±45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

Condition: used, Year of construction: 2011, turning diameter 160 mm turning length 550 mm Hfjdeyuzfpopfx Ad Rsg control Siemens weight of the machine ca. 9000 kg

Condition: excellent (used), Year of construction: 1995, turning length: 710 mm, Specifications: Hfsdpfx Adjyxrczj Rsg Control system: Siemens Maximum turning length: 710 mm Maximum turning diameter: 270 mm

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Index G42 lathe with 3m rod loader fully functional. Max. rod diameter, m. 42mm. Machine has an automatic rod tacker. With chip conveyor and coolant container. Revolver VDI30 without driven tool stations. With internal cooling. Siemens control C200. Machine is sold because machine operator retired. A lot of accessories included, on rod guide bushings, collets etc. see pictures. Machine manuals and documentation available. Hfodpfx Ajx Nbk Nsd Reg Machine is picked up in our hall.

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 straight turning atchm. - working travel . mm turret head 8 bar loader LNZ Hydrobar parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hfsdpsyutvaefx Ad Reg We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle passage 60 mm cross-slide 4 turret head 6 Pos. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hfedpfx Ajyt R E Aod Reg About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2004, - Synchron - C axis - Transmit function - Polygon device/thread milling cutter - 1 rear driven unit - Iemca Master 880 bar feeder, year 2004 Hfsdpfxeyvkbds Ad Reg

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Hfsdpfx Adsxxm Hfo Rog Production time: 26,500 With MBL Bar Feed

Condition: used, Year of construction: 1998, turning diameter 200 mm turning length 400 mm control Siemens type C 200-4 840 C spindle passage 65 mm Tool changer 2 x14 Pos. live tooling 2x Revoler weight of the machine ca. 4 t Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hfedpfx Aoyqvygsd Rjg If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1997, turning diameter 400 mm turning length 1250 mm control Siemens type 840 C swing diameter 590 mm turning speeds 3500 U/min Hfedpeyqvwfefx Ad Reg Torque 275/178 Nm spindle passage 50/65 mm clamping chuck diameter 250 mm output 43/28 kw Tool changer 80 Pos. tool taper Capto C 4 Counter spindle 3500 rpm Flexible head 1500/6000 rpm (2 gear ratios) Head with 4 stations (2 fixed stations for turning/2 milling stations) Power 9.4 kW Travel 1250 mm Spindle head ISO 702/1 size 8 (HSP) size 6 (GSP) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 straight turning atchm. - working travel . mm turret head 8 bar loader LNZ Hydrobar type 6.32HS-4.4 No.: ER25071388 Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Hfjdpfx Adoyqurue Rsg Your Markus Hirsch Team