Used Indigo Digital Press for sale (19,870)

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Crjdpfxexdahys Acpeh Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Csdpfx Aoz Au Hbscporh Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Codjv Sthgopfx Acperh Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Crodpfxjz E A I As Acpoh Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: like new (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. Codpfjzlixqsx Acpsrh The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Csdpfx Ajfv Avkocporh Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm Credsfv Awaopfx Acpoh table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, Year of construction: 2015, functionality: fully functional, pressing force: 54 t, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 400 kg, total width: 2,150 mm, total height: 2,160 mm, total length: 1,700 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Strautmann AutoLoadBaler baling press – Year of manufacture: 2015 Used automatic Strautmann AutoLoadBaler baling press for efficient compression of cardboard and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Model: AutoLoadBaler Year of manufacture: 2015 Pressing force: 530 kN (approx. 54 tons) Motor power: 4 kW Power supply: 3 x 400 V / 50 Hz Bale dimensions: approx. 1,200 x 800 x 1,100 mm Bale weight: approx. 400 kg, depending on the material Csdpjz Huhkofx Acpsrh External dimensions: approx. 1,700 x 2,150 x 2,160 mm (L x W x H) The AutoLoadBaler enables comfortable and efficient compression of recyclable materials and significantly reduces the volume of material. For transport, the machine can be partially disassembled. The hydraulic ram must then be professionally reassembled. Inspection possible by arrangement. All information without guarantee. Subject to prior sale.

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Crsdjz Hnzkepfx Acpoh Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: used, Year of construction: 2015, pressure 30 t stroke 300 mm daylight between the columns 700 mm dayligth 850 mm 140 mm diameter of piston 60 mm table surface area 700 x 390 mm weight of the machine ca. 0,35 t dimensions of the machine ca. 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms Crsdpfx Ajy Umbwecpoh - Emergency stop device

Condition: new, pressure 20 t stroke 180 mm daylight between the columns 540 x 100 mm dayligth max. 990 mm 72 mm diameter of piston 48 mm Crodpfjupxc Tsx Acpoh weight of the machine ca. 0,12 t dimensions of the machine ca. 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW Credpfx Aeyfwywocpoh weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, pressure 2 t throat 150 mm stroke 150 mm table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base Crjdpfx Acotzv Hmopjh - various press accessories

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm Csdpfx Acoupxr Uoperh dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: excellent (used), I sell a Lukas baler in very good condition. Cjdpeum Htzsfx Acperh

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Crsdpfx Acsy H Rdgjpeh Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), Price quoted per unit. Professional LeCroy 9354AL digital oscilloscope designed for advanced measurements and diagnostics of electronic circuits. The device is equipped with 4 measurement channels, a 500 MHz bandwidth, and a high sampling rate, making it suitable for research laboratories, electronics service centers, industrial automation, and R&D departments. Cjdpfxjzaf Sks Acporh Technical specifications: • Manufacturer: LeCroy • Model: 9354AL • Type: digital oscilloscope • Bandwidth: 500 MHz • 4 measurement channels • Sampling rate up to 2 GS/s • Acquisition memory up to 8 Mpts • BNC inputs • Built-in CRT screen Condition: Used device, fully functional. The oscilloscope starts up correctly and displays waveforms. Normal signs of wear and tear are visible, resulting from use and storage. Note: One of the plastic housing elements at the back has a crack. The damage is purely cosmetic and does not affect the device's operation or performance parameters.

Condition: excellent (used), The original German Hang Piccolo binding machine is designed for punching holes and attaching metal eyelets to paper, cardboard, and other materials used in binding. The device features a convenient foot-operated drive, allowing for quick and precise operation while keeping the operator's hands free to position the material. Technical specifications: * Manufacturer: Hang * Model: Piccolo * Type: binding press / eyeleting machine * Drive: foot-operated (pedal) * Cast iron construction * Work table included * Made in Germany Applications: Cedpfjzgvnzjx Acperh * Eyeleting documents, * folders and binders, * calendars, * hang tags, * labels, * promotional materials, * binding operations. Condition: Used machine, in good visual condition. Condition as shown in the photos.

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Cjdey Um S Nopfx Acporh Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: new, Year of construction: 2026, Horizontal bending machine T 1000 Multi - ZOPF - with semi-automatic control - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 10 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 2300 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 300x32 mm (V200) round tube 3/8" - 3" Cedpfjg Anurox Acpsrh

Year of construction: 2022, condition: new, Press hydraulic 6 six meters automat for fingerjointing line lignum Press hydraulic 6 six meters automat for fingerjointing line lignum Second hand 2022 Make: Press hydraulic 6 six meters automat for fingerjointing line lignum Model: Cedpfxjimwx Ee Acporh Press hydraulic 6 six meters automat for fingerjointing line lignum Description: press hydraulic 6 six meters automat for fingerjointing line lignum .iNPUT TRANSPORT band output automat proces .More infomation plese send for mail Year: 2022

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Crsdpfxstrl R Ao Acpsh Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic Csdpfsdntc Nex Acperh

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Crodpfx Ajz Iy U Sscpoh Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Crodpfjz Imcpox Acpjh Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools