Used Infeed for sale (2,039)

Condition: good (used), Year of construction: 2010, workpiece weight (max.): 20 kg, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, torque: 256 Nm, spindle bore: 52 mm, power: 45 kW (61.18 HP), CNC vertical turning center Manufacturer: EMAG Type: VTC 250 LEAN Year of manufacture: 2010 Control: Siemens 840D sl Technical data: Max. turning diameter: 140 mm Max. turning length: 700 mm Max. swing diameter: 376 mm Main spindle: Max. speed: 5,000 rpm Max. torque: 256 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 1 Number of tool positions: 5 + gripper / 11 + gripper Max. tool diameter: 125 mm Max. tool weight: 10 kg Max. tool length: 120 mm Max. workpiece weight: 20 kg Feed rates: Rapid traverse (x / z): 40 / 30 m/min Djdpfx Ao Agr Edsk Ascp Total power consumption: 45 kW Machine weight: approx. 12 tons There are 6 identical machines available. Technical features & accessories: - Open automation - Safety device - Preparation for extraction - Handling infeed and outfeed - Central extraction (not included) - Central coolant supply (not included) - Chip conveyor (1 for 3 machines) Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is mentioned in the additional information.

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available Dodpfsz Sp Anjx Ak Ascp - Availability on request - Location: Albania

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, Dsdpjhy Tlrofx Ak Aocp radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Budde Condition: used drive type: motorized -king shaft total length outside: ca. 1500 mm total length inside: ca. 1850 mm Dcsdpfjmxf Uvsx Ak Ajp total width incl. motor: ca. 900 mm total width without motor: ca. 560 mm conveying width: approx. 540 mm Material: steel, plastic Color: light gray Including feet (height adjustable) and motor gear (north 0.55 KW) Discharger/ Infeed/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm Dcodpfxepq If De Ak Ajp cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Numerical display for working height Planer table made of gray cast iron The planer table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller clamping pressure adjustable Front infeed roller with helical gears Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter block Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position is maintained perfectly even without locking Helically geared steel infeed rollers for consistent and even wood feed Second, rubberized feed roller at the outfeed Solid anti-recoil guards prevent workpiece recoil A 4-cutter block ensures an optimal planing result Dimensions and weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust extraction connection Dust extraction nozzle diameter (planer table) 150 mm Drive power Main motor 7.5 kW Installation information Dcsdpfxod Hx E Ie Ak Aop Space requirement (length) 1170 mm Space requirement (width/depth) 1003 mm Space requirement (height) 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 520 mm Planer table width 1000 mm Working height min. 3.5 mm Working height max. 250 mm Working length min. 210 mm Maximum chip removal 8 mm Electrical data Connection voltage 400 V Planing cutter block Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 Dcjdpfx Aed E Ixzok Asp working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), JBT M6 6 fryer. electrically heated fryer, 600 mm wide with 6 m frying length. Machine in lovely condition with auto canopy lift, top hold down belt and Teflon infeed. Rare opportunity. Dcedpfx Ast Dxwtok Aep

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition Dcedpfx Aevw Egrsk Ajp

Condition: good (used), functionality: fully functional, Wood chipper for logs and branches Drive via PTO shaft Max. infeed size: 35 x 35 cm 4 blades Dcedpfx Aks Agypps Asp 2 screens with 20 mm and 30 mm mesh Only 1600 operating hours

Condition: used, Year of construction: 2018, Offered is a single-lane tray sealing line for food packaging. Sealing tool: 6 impressions. Tray format: Ø 148mm. Tray material: PP barrier. Tray volume max.: 550ml. Control system: Electronic machine control system with operator panel. Equipped with: Carsoe Anytray Denester (tray denester), Ishida infeed conveyor with indexing chain, length 6000mm, Ishida single-lane tray sealer QX1100 with 6-impression sealing tool including tooling trolley, Ishida conveyor belt, length 2400mm, Ishida X-ray inspection system IX-EN-2463, year of manufacture 2018, Ishida checkweigher DACS-G-S015-24-SS, year of manufacture 2018, Ishida discharge conveyor, length 1400mm, Ishida spare parts package. Low operating hours. Inspection is possible by arrangement. Dodpe Agwp Ijfx Ak Aocp

Condition: used, Offered for sale is an industrial bottle washing machine with a multi-stage cleaning system. Rated capacity: 2000bottles/h. Bottle volume: 0.2-1.0liters. Bottle diameter: 58-88mm. Bottle height: 140-330mm. Total bottle rows: 61. Bottles in the machine: 770 units. Cycle time: 19.3846sec. Total transit time: 19.71min. Caustic contact time: 11.95min. Max. water consumption: 1.0m³/h. Equipped with bottle infeed and discharge, weak caustic bath, multi-stage spray systems for caustic solution, hot, warm and fresh water, and label discharge. Empty weight: approx. 6500kg. Overall dimensions X/Y/Z: approx. 5050mm/3139mm/2450mm. Height including spindles: 2600mm. Inspection possible by arrangement. Dsdj Ad Nqhepfx Ak Aecp

Condition: used, Year of construction: 1989, For sale: Complete material handling system from a sawmill, manufactured in 1989, from Möhringer. - Log infeed system - Roller conveyor with cutoff saws - Transverse conveyor - Vibrating conveyors, approx. 45 m - Double scraper chain conveyor with two discharge points The material handling system has already been dismantled and can be inspected on site. Dimensions can be taken from the layout plan. Inspection required! Djdo Ag Nuajpfx Ak Aocp

Year of construction: 1999, condition: good (used), EWD NKU 300 – Double-arbor resawing circular saw with control cabinet For sale is a used EWD NKU 300 with a control cabinet. This robust double-arbor resawing circular saw is designed for resawing lumber and squared timber. Version with a fixed infeed. Technical data: Dcods Ahzpgjpfx Ak Aop * Manufacturer: Esterer WD GmbH (EWD) * Type: NKU 300 * Type/Position: 10.1 * Identification No.: 816481 * Year of manufacture according to nameplate: 1999 * Cutting height: up to approx. 305 mm * Saw arbor drives: 2 × 110 kW * Saw arbor speed: 2,400 min⁻¹ * Max. saw blade diameter (top): 620 mm * Max. saw blade diameter (bottom): 560 mm * Feed rate: model series specification up to 80 m/min * Includes control cabinet Further information regarding condition, equipment, and viewing can be provided upon request.

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - max. cutting height: 120mm - roller width: 510mm - roller diameter: 75mm - max. saw blade diameter: 400mm – Top: - feed fingers/ejectors, 2 rows - driving roller, toothed - driving roller, toothed, outfeed Dcodpfx Aezxrd Nok Aep – Bottom: - feed fingers/ejectors - 2 driving rollers, toothed - saw blade roller - driving roller, toothed, outfeed - 6 feed speed settings - hydraulic motor (feed, infeed, rollers): 3kW - main motor: 22kW - stepless feed speed adjustment - control panel stand dimensions: 700x600x1000mm - overall dimensions (L/W/H): 2300x1450x1600mm - weight approx. 2650kg ADVANTAGES - Made in Turkey - Robust construction - Used machine, very good condition Net price: 37900 PLN Net price: 8800 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with larger fluctuations)

Condition: ready for operation (used), Working width: 1350 mm Workpiece thickness: 3-160 mm Workpiece length: min. 200 mm Belt speed: 22 m/s Belt dimensions: 1330 x 1900 mm Feed rate: 6-25 m/min Feed motor: approx. 1.1 kW Height adjustment motor: approx. 1.1 kW Drive motor: approx. 18.5 kW Weight: approx. 2750 kg Equipment: Dcjdpfx Akj Ah Rv Ns Ajp Roller assembly Sanding shoe assembly Outfeed and infeed roller guide No cleaning brush The machine can currently be inspected and tested. The data was taken from a data sheet; therefore, no guarantee is given regarding its accuracy.

Condition: excellent (used), CATALOGUE NUMBER 7680 TECHNICAL SPECIFICATIONS - max. blade diameter 500mm - spindle diameter 30mm - hydraulic blade stroke - max. cutting width 500mm - max. cutting height (in the centre, with a 500mm blade) 160mm - main motor 4kW - table dimensions 715x1070mm - table height from the base 790mm - 2 roller tables Dsdpfx Aoztapisk Ascp - table dimensions: - infeed table length/width 2000x640mm - outfeed table length/width 2000x640mm - machine dimensions length/width/height 1400x940x1070mm - total weight 480kg ADVANTAGES – 2 roller tables – hydraulic blade stroke – used saw, very good condition Net price: 15900 PLN Net price: 3700 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Dcjdpfxs Ah Simo Ak Aop Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: used, Year of construction: 2003, Format: 390 x 285 mm Equipment: Book stacker Book Format Dimensions (Height x Width) Minimum format: 115 x 100 mm (down to 115 x 70 mm with optional small-format modifications) Maximum format: 390 x 285 mm (up to 390 x 310 mm with specific produ Dedezphl Rjpfx Ak Ascp Book Thickness Minimum thickness: 5 mm Maximum thickness: 90 mm Stacking and Pile Height Maximum stack / pile height: 340 mm Operational Performance Mechanical capacity: Up to 3,900 cycles per hour (or roughly 65 cycles per minute) Infeed and Rotation: Features a built-in turning device capable of rotating the blocks gently

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher Dsdpek Abnvefx Ak Aecp several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, Motor: 7.5 kW Tersa cutterhead, Z = 4 2x sliding rollers in the thicknessing table, height-adjustable Steel feed roller, ribbed Infeed roller before and after the thicknessing table Safety bar Cutterhead speed: 5000 rpm Planing height: 2.8 - 250 mm with digital display Planing width: 630 mm Max. chip removal: 8 mm Dust extraction port: 160 mm Weight: approx. 1115 kg Dimensions: 1140 x 1260 x 1200 mm Dcedpfx Aj Aay D Rjk Aop Storage location: Nattheim

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor Dcjdsztpmqjpfx Ak Ajp - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for processing flooring – electric table lifting – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Catalog number 7640 ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm Dsdozx Suuepfx Ak Aocp - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7739 TECHNICAL DATA PLANER: - cutterhead width 410mm - 3-knife cutterhead - noise-reducing comb - cutterhead guard - adjustable angle guide - table length 2060mm - both tables adjustable THICKNESS PLANER: - max. thickness of workpiece in thickness planer 240mm - thickness planer cutterhead guard *from top: - pawls - infeed roller, toothed, with twist - pressure rollers - planing roller - pressure roller - outfeed roller, smooth - 2 adjustable rollers in the lower table - main motor 5.5kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter 120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES – Made in Italy – Noise-reducing comb – Unpainted – Excellent condition – Used planer-thicknesser Dedpfx Aozx R Tcek Aecp Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: ready for operation (used), Year of construction: 2004, total height: 700 mm, total width: 1,200 mm, overall weight: 1,700 kg, product length (max.): 1,000 mm, Centerless grinding machine manufactured in 2004. This HERMINGHAUSEN SR 2 W features a grinding wheel circumferential speed of 35 m/sec and is equipped with a Lenord+Bauer control panel with a digital display. It includes a coolant and filtration tank system, along with a part feed chute/guide. If you are looking to get high-quality grinding capabilities, consider the HERMINGHAUSEN SR 2 W machine we have for sale. Contact us for further details. Dedpfxez Sp Uko Ak Aocp - Smallest Workpiece Diameter: 0.2 mm- Largest Workpiece Diameter: 40 mm- Maximum Grinding Length (Throughfeed Grinding): 300 mm- Maximum Grinding Length (Infeed Grinding): 100 mm- Grinding Wheel Dimensions (Diameter x Width x Bore): 300 x 100 x 150 mm- Regulating Wheel Dimensions (Diameter x Width x Bore): 200 x 100 x 120 mm- Grinding Wheel Circumferential Speed (Document Nominal): 40 m/s- Grinding Wheel Circumferential Speed (User Spec): SUG = 35 m/s- Regulating Wheel Speed (Infinitely Variable): 10 - 180 RPM- Regulating Wheel Tilt Angle (Adjustable): -1° to +6°- Fine Infeed (Pre-selectable): 1 µm to 10 µm- Grinding Spindle Drive Power: 4.0 kW- Regulating Wheel Drive Power: 0.5 kW- Voltage / Current / Frequency: 400V / N / PE / 50 Hz- Rated Current: 25 A- Coolant System Flow Rate: 100 l/min- Number and Travel of Axes: 2 Axes (X-axis slide/infeed feed and Z-axis/table traverse movement)- Control / Panel: Lenord+Bauer control panel with digital display / SFS upgrade- Main Dimensions (L x W x H): 1000 x 700 x 1200 mm- Grinding Spindle Centre to Bottom Edge of Bed: 950 mm- Machine Weight (Ready for Operation): 1,700 kg- Surface Load: 0.95 kg/cm²- Control Cabinet Weight: 200 kg- Optional Equipment: Coolant / filtration tank system, part feed chute/guide