Used Infeed for sale (1,848)

Condition: excellent (used), Year of construction: 1994, Bäuerle Thickness Planer DM 630 with Thickness Table Extension Planing width: 630 mm Planing height: 260 mm Centrofix cutterhead Z = 3 Rubber infeed and outfeed rollers Electric table adjustment with digital display Drive motor: 7.5 kW Feed rate: 7 + 14 m/min Extraction port: 160 mm Dimensions: 1150 x 1120 x 1060 mm plus table extension Weight: approx. 1260 kg Ledpfx Aaexgbwuscorw Location: ex-stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. Lredpfx Aoxuu Dksacsw EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: excellent (used), Year of construction: 2017, 1 x used compensating stacker Manufacturer: Gämmerler Model: KL540 Lift-Pack, low or high infeed Year of construction: 2017 several stackers available! also for cannibalization. Ljdpot Ifh Hjfx Aacerw

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Lrodpfx Aasxymd Tjcow Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Year of construction: 2005, condition: used, Technical details: total power requirement: 24,47 kW 1 Centrifugal Wheel Shot Blasting Machine WheelLaborator Group GmbH, Schlick HB10/12 ROTOJET HB 10/12-5.3-2 Year of manufacture: approx. 2005, Serial No.: 043 (Overhead conveyor shot blasting machine) W/h: approx. 44760.82, with infeed and outfeed conveyor chain, shot blasting rods, control cabinet Lrjdpfxsxyk Ats Aacsw *

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Lodpfx Aasxq Apgscsrw

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Lredpfst U Rn Sox Aacjw Location: ex stock 54634 Bitburg: - immediately available -

Year of construction: 2014, condition: used, Power: 17 kW (23 HP) Manufacturer : Smipack Model: BP800AR 280ST Year : 2014 Type : Automatic monobloc shrinkwrapper   Power : 17,2 KW Output capacity : 17 units / min Pneumatic stacker for rigid products Variable speed 90° infeed conveyor Multilingual menu   Width of infeed conveyor belt: 280 mm Ljdpfx Aajxxcyhocerw Product infeed height : 165 mm Maximum bundle height: 380 mm Sealing bar: 760 mm

Condition: ready for operation (used), Year of construction: 2001, grinding length 800 mm grinding width 500 mm workpiece height 475 mm table-size 800 x 450 mm longitudinal feed 900 mm hydr. feed stepless 30 m/min Lredoxddr Aepfx Aacjw cross feed autom. 1-30 mm vertical feeds: 1-99 My rapid traverse vertical 0,3 mm/min dimensions of grinding wheel 350 x 50 x 125 mm grinding spindle drive 7,5 kW total power requirement 9,37 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4 x 2,7 x 2 m Hydraulic surface grinding machine with AC control for automatic surface and plunge grinding with automatic intermediate dressing and dressing compensation, including various infeed rates in the roughing and finishing cycles. Hydraulic longitudinal table movement, servo-controlled transverse movement, hardened ball screw of the highest precision, automatic lubrication of the longitudinaland transverse movement. Automatic vertical infeed via stepper motor with digital display. Dressing device for manual or automatic straight dressing of the grinding wheel. Electro-permanent magnetic chuck with automatic demagnetization and holding force control. Automatic spark-out, rapid traverse vertical adjustment. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2009, - Moulder 5 stations / 4 tool holders for sharpening Pin diameter: 40 mm Digital positioning Variable speed: 5 to 15 m/min Liftable inlet roller Pneumatic pressers Electric display meter Table lubrication via pedal 99 possible programs Capacity: minimum width 20 mm / maximum width 230 mm - minimum height 8 mm / maximum height 120 mm Hood opening safety feature Lrodpfxsxxtlbo Aacew CE standards => OK Tool holders: 125 mm diameter Engine power: Planer infeed = 5.5 KW Spindle tops left and right = 11 kW Upper planer = 7.5 kW Lower planer = 5.5 kW Total machine power = 32 kW Suction diameter: 120 mm Voltage: 380 V Dimensions: 250 x 150 x H175 cm +/- 2.200 kg - Automatic charger Minimum piece length: 160 cm Maximum piece length: +/- 400 cm Loading height: 60 cm Dimensions: 195 x 45 x H165 cm

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Lodjxya Rtepfx Aacsrw Location: Flörsheim

Condition: used, Year of construction: 2023, Used Palamides gamma 502ho delivery machine The Palamides gamma 502ho is an automatic delivery and banding machine, specifically designed for the efficient post-processing of print products such as brochures, flyers, greeting cards, and mailings. It is ideal for connection to folding machines, saddle stitchers, collators, or mailing lines and stands out due to its compact design, high flexibility, and ease of use. The gamma 502ho increases productivity, reduces operating costs, and enables efficient handling of large production volumes even with minimal staff. Key Features - Compact, mobile design: Requires only a small footprint and can be quickly connected to various production machines. - Automatic banding: Optional, robust impulse sealing system for secure and clean banding of stacks. - Intuitive operation: Clear touch display and user-friendly interface for quick setup and operation by a single person. - Flexible delivery: Stacks can be banded or delivered loose; the desired quantity is freely selectable. - Efficient waste control: Automatic ejection of defective products, production stop if too many defective copies occur in succession. - Large buffer table: Gives the operator sufficient time for quality control and packaging of stacks. - Seamless integration: Especially suitable for connection to the Horizon iCE StitchLiner Mark IV, but also universally usable for other machines—no additional interface required. Lrsdow Evclopfx Aacjw - Industry 4.0-capable: Operational data acquisition and dynamic separation of book blocks of different sizes possible (DSP platform). Technical Specifications - Infeed format: 4-page sheets, variable from 650 to 1,000 mm - Product thickness (max.): 100 mm (optional 120 mm) - Format (max.): 510 x 235 mm - Format (min.): 140 x 95 mm (optional 95 x 75 mm) - Performance: up to 600 packs/cycles per hour - Main connection: 3ph+N+GND 400V AC, 50/60 Hz - Control voltage: 24V DC - Power: 4 kW - Fuse: 16A - Year of manufacture: 2023 - Weight: approx. 500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1998, Hot-melt Case Sealer – Overview This used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput. Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as part of a complete used bottling line or as a stand-alone machine with compatible conveyors, the 607-98 aligns with industrial packaging best practices for efficiency and product protection. Technical Specifications & Performance Data Ljdpfx Aoxywf Ieacerw Manufacturer: TE-CO Model: 607-98 Year of manufacture: 1998 Sealing method: Hot-melt (glue) adhesive Application: Case/carton sealing after case packing Typical use: Wine bottle cases within a used bottling line Compatible bottle formats in cases: 0.75L, 1.0L, 1.5L Construction: Industrial end-of-line machine for continuous operation Operation: Inline with case packer upstream and palletizer downstream Advanced Automation & Control Systems The TE-CO hot-melt case sealer is designed for dependable automation in industrial packaging. Typical features include adhesive temperature control for consistent bonding, synchronized infeed and outfeed for smooth case flow, and safety interlocks for protected operation. Operator-friendly controls support quick adjustments and stable performance during format changes. The hot-melt application system helps deliver clean, repeatable glue patterns to ensure secure, uniform sealing. Production Line Integration Capabilities This case sealer integrates naturally into a used bottling line, operating immediately after a case-packing monoblock and before palletizing. It can be synchronized with upstream equipment such as erecting and packing systems and connected downstream to palletizers for automated material handling. The machine supports inline operation with standard conveyors and can run as a stand-alone sealer when properly fed. Machine Condition & Maintenance History The machine is presented as ready for operation within a second hand used bottling line context. Safety features and documentation are available, supporting commissioning and routine maintenance. Its industrial build promotes reliable service in beverage production environments.

Condition: used, Year of construction: 2004, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame – Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   Lrjdpfx Aexxctheacow These elements can be the subject of a separate quotation. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: excellent (used), CATALOG NUMBER 7822 Technical Data: - Axis width: 410 mm - 4-knife cutterhead - Max working thickness on the thickness planer: 200 mm - Max working thickness on the side heads (three-sided): 110 mm From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterhead - Pressure bar - 2 smooth outfeed rollers - Pressure bar From below: - 3 adjustable rollers in the lower table From the rear: - 2 side spindles - Spindle height: 110 mm - Spindle diameter: 30 mm - Spindles adjustable up/down, right/left - Side spindle motors: 2x4 kW - Main motor: 4 kW - 3 feed speeds: 0.12; 0.19; 0.30 m/s - Feed motor: 0.75 kW - Table lifting motor: 0.75 kW - Extraction ports: 3x120 mm - Overall dimensions (L/W/H): 2050x1300x1500 mm - Weight: 1200 kg ADVANTAGES – Made in Poland Lodjxyki Hspfx Aacerw – Very good condition – Electric table lifting – Technical documentation (DTR) – Used planer Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Lrsdpfx Aaevwbp Ascow

Condition: used, Year of construction: 2022, Horizon HOF-400, fully automatic feeder, used. Lrodpfsu Tfupsx Aacew This robust, fully automatic feeder was specially developed for the offline production of digitally printed booklets in conjunction with the SPF-200A, SPF-200L booklet making units, the StitchLiner 5500 and other optional additional devices. The sheets are removed sheet by sheet, checked, grouped and fed to the downstream unit in a block. Mark reading ensures reliable grouping and the production of brochures in different sizes. Special features: - Maximum flexibility at an extremely attractive price-performance ratio - Reliable paper feed thanks to suction belt feed - Extremely short set-up times thanks to fully automatic format adjustment - Extremely easy operation and set-up in seconds thanks to TOUCH&WORK technology - Economical processing of small and medium volumes in top quality Technical specifications: - Infeed format 4-sided sheets min. 203 x 203 mm, max. 610 x 356 mm (depending on downstream unit) - Paper thickness 50 - 160 g/sqm for normal paper / 70 - 160 g/sqm for coated paper - Loading capacity max. 620 mm - Speed A3 format max. 25,000 sheets/h - A4 format speed max. 35,000 sheets/h / max. 45,000 sheets/h (landscape) - Weight 782 kg (with front cutter FC-200A) - Machine dimensions 960 mm x 1,050 mm x 936 mm (LxWxH) - Power supply 400 V 1.8 A, 1.0 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2004, Used Keber PALPACK DS Palletizer The Keber PALPACK DS is a conventional automatic palletizer designed for end-of-line carton palletizing in beverage production and industrial packaging environments. This secondhand solution streamlines the final stage of a used bottling line by arranging sealed cartons into stable layers and placing them onto pallets according to predefined stacking patterns. Engineered for reliable throughput and smooth handling, it helps producers prepare loads for wrapping, storage, and transport with consistent quality and minimal operator intervention. Manufactured by Keber, the PALPACK DS integrates seamlessly into complete packaging lines processing glass bottles packed in cartons. Typical applications include bottled beverages in standard retail formats such as 0.75L, 1.0L, and 1.5L. Its practical layout and robust construction support continuous-duty operation in demanding facilities where uptime and pallet stability are essential. Whether upgrading an existing used bottling line or expanding capacity, this palletizing system offers dependable performance in a compact, operator-friendly footprint. Technical Specifications & Performance Data Manufacturer: Keber Model: PALPACK DS Machine type: Conventional automatic palletizer for cartons Year: 2004 Container handling: Designed for glass bottles packed in cartons Bottle formats: Compatible with 0.75L, 1.0L, 1.5L bottle formats (cartonized) Pallet format: Eur-Epal pallet, 800×1200 mm Advanced Automation & Control Systems Ledpfxexywafo Aacjrw The PALPACK DS enables automated layer forming and orderly pallet build-up for consistent, repeatable results. Its end-of-line control logic coordinates carton infeed, layer positioning, and pallet changeover, helping operators maintain stable stacks for downstream wrapping. The design supports clear operator access, safety interlocks, and straightforward adjustments to maintain efficiency during product runs and format changes. Production Line Integration Capabilities This palletizer is positioned downstream of a hot-melt case sealing stage and upstream of pallet wrapping, enabling a continuous, automated flow from packed case to finished pallet. It is compatible with standard conveyor systems and integrates into used bottling line layouts handling glass bottle cartons. The system is suited to beverage production where multiple bottle sizes are packed into cases and prepared for distribution. Typical integration examples include: Upstream: hot-melt case sealer (e.g., TE-CO 607-98) Downstream: automatic pallet wrapper (e.g., Imballaggi Service Group EASY WRAP 2000 A) Machine Condition & Maintenance History This equipment is listed as ready for operation within a complete line context. It is presented as a functional, secondhand palletizer suitable for immediate integration into industrial packaging and beverage production workflows.

Condition: used, Year of construction: 2007, Manufacturer: Groninger Model: KFVG251 + DTE 1000 Year : 2007 Type : Filling, capping and crimping machine for sterile glass or plastic vials Application : Crimping bottles in sterile / aseptic environment Infeed turntable with deposit tray and push device Object detection station Lredpfx Ajxxclksacow Tubular peristaltic pump: Flexicon Plunging filling heads: level filling Gassing station Capping station with feed hopper + vibrating bowls Crimping station: lateral crimping disc, on-the-fly cap pick-up, feed hopper + vibrating bowls Product exit / ejection Full technical documentation available. Sizes available : 4 / 6 / 15 / 30 / 50 / 60 / 120 / 250 ml Cap: ø 13 mm and Ø 20 mm

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Lsdpfxjvvkfdo Aacsrw

Condition: used, Year of construction: 2022, Horizon HOF-400, fully automatic feeder, used. This robust, fully automatic feeder was specially developed for the offline production of digitally printed booklets in conjunction with the SPF-200A, SPF-200L booklet making units, the StitchLiner 5500 and other optional additional devices. The sheets are removed sheet by sheet, checked, grouped and fed to the downstream unit in a block. Mark reading ensures reliable grouping and the production of brochures in different sizes. Special features: - Maximum flexibility at an extremely attractive price-performance ratio - Reliable paper feed thanks to suction belt feed - Extremely short set-up times thanks to fully automatic format adjustment - Extremely easy operation and set-up in seconds thanks to TOUCH&WORK technology - Economical processing of small and medium volumes in top quality Technical specifications: - Infeed format 4-sided sheets min. 203 x 203 mm, max. 610 x 356 mm (depending on downstream unit) - Paper thickness 50 - 160 g/sqm for normal paper / 70 - 160 g/sqm for coated paper - Loading capacity max. 620 mm - Speed A3 format max. 25,000 sheets/h - A4 format speed max. 35,000 sheets/h / max. 45,000 sheets/h (landscape) Lredpfx Aasxw Th Hocsw - Weight 782 kg (with front cutter FC-200A) - Machine dimensions 960 mm x 1,050 mm x 936 mm (LxWxH) - Power supply 400 V 1.8 A, 1.0 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1988, Manufacturer : OLI Model: 210 Year : 1988 Type : Semi-automatic side loading case packer Application : To insert grouped cartons of regular shapes into shipping cartons Carton infeed and grouping : automatic Empty box loading: manual Infeed conveyor Outfeed roller conveyor Lodpfxoxxch Sj Aacorw Factory voltage: 220 / 380 V Control voltage: 24 V Max. pressure: 6 bar   Current format: see illustration, adaptation can be quoted separately.

Condition: used, Year of construction: 2021, Horizon KTU-40: MOBILE KNIFE FOLDER Compact knife folding unit for cross and parallel folds, designed for connection to folding machines. Especially suitable for miniature folds. Standard equipment includes one knife and a parallel fold plate, which can be used on the right or left side. Special Features - Very robust construction for professional continuous operation - Standard vertical stack delivery - Infinitely height-adjustable - Minimum fold length: 20 mm - Folding unit including delivery can be swiveled by 45°, enabling safe processing and delivery of long and narrow products (Horizon patent) - Total and batch counter including kicker - Easily adjustable folding rollers with 30 mm diameter - Independent control, operable with various machines - Variable fold plate after the knife fold Technical Specifications - Infeed format (cross fold): Min. W 90 mm x L 20 mm – Max. W 400 mm x L 220 mm - Infeed format (parallel fold): Min. W 40 mm x L 70 mm – Max. W 220 mm x L 200 mm - Finished format: Min. W 20 mm x L 22 mm – Max. W 200 mm x L 150 mm - Fold lengths (folding plate): 20 mm to 110 mm, manual adjustment - Material thickness: Max. 4 mm - Speed: 30 to 180 m/min, adjustable manually - Feed height: Variable between 640 to 880 mm - Noise emission: 70.1 dB Laeq - Heat emission: 1,490 kJ (360 kcal) - Voltage/Frequency: Single-phase AC 230 V / 50 Hz - Power consumption: 580 W (50 Hz, 220 V) - Machine dimensions: 1,140 (L) x 1,620 (W) x 1,180 (H) mm - Machine weight: 410 kg - Ambient conditions: Temperature 0 to 40 °C - Relative humidity: 20% to 75% All-Inclusive Service Package Ljdpoxg E Udjfx Aacorw We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2003, condition: used, Dimensions (LxBxH): 70 x 150 x 140 cm Current frequency: 50 Hz Ljdpfx Aaoxxcdaocjrw Voltage: 380 Manufacturer: Zanchetta Model: Piraña Year: 2003   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Condition: used, Year of construction: 2016, Used Horizon PSX-56 Sheet Press and Stacker The Horizon PSX-56 is a fully automatic sheet press and stacker designed for processing folded sheets or booklets. It can be connected to various Horizon machines as a standalone module. Key features: - Presses products after folding for better flatness and sharp edges - Ideal for small to medium print runs - Versatile use for folded sheets and booklets - Compatible with various Horizon machines - Fully automatic pressing and stacking - Electronic measurement of products - Removal of poorly folded products - Precise and mark-free jogging of stacks - Touchscreen control panel for easy settings - Memory for up to 20 jobs - Two operating modes: Single sheet and Stream feeder - Adjustable infeed height Technical specs: Lrodpfx Aaoxrz Iqecew - Paper size: Max. 546 x 330 mm, Min. 128 x 92 mm - Stack height: Max. 200 mm, Min. 10 mm - Folded sheet thickness: Max. 4 mm - Production speed: Max. 900 stacks/hour - Infeed height: Adjustable between 440 - 1000 mm - Roller set: 1 pre-press roller pair, 2 press roller pairs - Power: 230 V, 50/60 Hz - Current: 4.5 A - Power consumption: 620 W - Size (W x D x H): 1,940 x 2,280 x 1,080 mm - Weight: Main unit 621 kg, Stacker 24 kg - Paper weight: 52.3 to 157 g/m² (normal paper) 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.