Used Injection Machine for sale (64,875)

Condition: used, Stretch blow molding machine from Etek Iajdpfokucxlox Abvsu ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100 – 12000 MX injection molding machine Robot - Wittmann Year of production - 2008 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, screw diameter 120 mm, with non-return lock and open nozzle TECHNICAL DATA Closing unit - Mold closing force: kN 11000 - Mold opening force: kN 770 - Dimensions of the mounting plate (h x v): mm 2210 x 1910 - Clearance between columns (h x v): mm 1550 x 1250 - Mold opening path: mm 2000 - Mold installation height (min - max): mm 600 - 1200 - Plate opening stroke: mm 2600 - Ejector stroke: mm 300 - Ejector force: kN 220/110 Injection unit - Screw diameter: mm 120 - Pressure injection: bar 1758 - Injection volume: cm3 6786 - Injection weight for PS: g 6175 - Number of screw revolutions, standard/option: rpm 103/145 - Injection efficiency (standard) ccm/s 1118 - Injection efficiency (accumulator) ccm/s 1696 Electric-hydraulic equipment - Nominal power of the pump motor: kW 132 - Installed power of heaters: kW 82 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 802 - Oil tank capacity: l 2440 Dimensions and weight - Net weight with control cabinet: t 73 Ijdpfsvu Hp Aex Abveau - Machine dimensions (length x width x height): m 12.47 x 3.65 x 2.82

Condition: used, Year of construction: 2024, clamping force: 650 kN, displacement volume: 2,212 cm³, injection pressure: 2,090 bar, overall weight: 28,000 kg, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request Iasdpfx Abey Tbzveveu terms of payment: 100% prior to delivery

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1999 Operating hours: h Machine number: 178930 Type / Model: 270C-300-100 Clamping force: 30 t Min. mold installation height: 225 mm Max. opening stroke: 325 mm Max. platen distance: 500 mm Clear tie-bar distance: 270 x 270 mm Platen size: 400 x 400 mm Screw diameter: mm Max. dosing volume: 90 cm³ Shot weight PS: 80 g Holding force: 31 kN Connection: 25 kW Accessories/equipment: 1 core puller Condition: good Weight: 1.8 t Dimensions: 3,700 x 1,700 x 1,800 mm Iasdpfxsxf Dxrs Abvsu

Condition: good (used), Manufacturer: Arburg Isdpfxezbx Ale Abvsau Year of manufacture: 1999 Machine number: 175831 Type / Model: 370S-800-350 Pump operating hours: 82,478 h Automatic cycle hours: 74,766 h Clamping force: 80 t Opening stroke: 450 mm Tool installation height: 200 mm Tie bar spacing: 370 x 370 mm Platen size: 638 x 638 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Shot weight: 153 g Holding force: 45 t Connection: 23 kW Accessories / Equipment: 1 core pull, take-out gripper Condition: good Weight: 3.8 t Dimensions: 4,300 x 1,500 x 2,100 mm

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t Ijdpfxjvkqfao Abvsau dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Iedpszb Ivhefx Abvsau Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 50.11.547, clamping force: 1,472 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, ejector force: 4,000 N, opening stroke: 460 mm, total length: 6,000 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 6,600 kg, number of injections: 1, power: 64 kW (87.02 HP), input voltage: 400 V, For sale is a hydraulic injection molding machine, NPM Multipower 150, manufactured in 2011. Iodpoza D Idefx Abvsau The machine is being replaced by a larger unit due to a capacity expansion. During the dismantling process, the control panel (HMI) was removed and sent in for repair. Since the machine is no longer needed, we would prefer not to invest in the cost of a repair. For this reason, the machine cannot currently be put into operation or its functionality tested. The operating hours also cannot be read at this time. The machine was mainly used in our facility for the production of plastic caps as well as sample and prototype parts. Accordingly, it was rarely operated in multi-shift mode or under high load. The removed control panel will be provided with the machine. We are not aware of the current repair status. Upon request, we will gladly provide contact information for the responsible service partner so that a potential buyer can inquire directly about repair options. The machine is explicitly sold as an untested used machine without any functional guarantee. It is particularly suitable for specialized companies with their own maintenance department, for retrofit projects, or for obtaining spare parts. Inspections are possible and expressly encouraged, by prior arrangement.

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Iedpfx Ajxf T I Nsbveau Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Iaedpfey Snapox Abvsu Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug -Roboter

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Iaodozcaxdspfx Abvju Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: used, Year of construction: 2013, Model: BOY 55 E Machine type: Injection molding machine Year of manufacture: 2013 72,000 operating hours Serial number: 55241 Clamping Unit • Clamping force: 550 kN (55 tons) • Tie bar spacing: 360 x 335 mm • Opening stroke: approx. 400 mm • Minimum mold installation height: 250 mm • Maximum plate distance: 650 mm Servo drive system (E-version): • Up to 30–50% lower energy consumption compared to conventional hydraulics Hydraulic motor power: approx. 7.5 – 11 kW Including: ROBOT: tecno matic micro 13-0040 Iasdezcav Nepfx Abveu Payload capacity: ~1–3 kg

Condition: used, Year of construction: 2006, operating hours: 4,500 h, VICTORY 200/80 Power SN: 50294 Year: 2006 Closing force (kN): 800 S10 screw, diameter 30mm Operating hours: ONLY 4,500 Mounting plates enlarged vertically Mould heater with 12 control loops HV 2 version with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Ethernet interface for use with EMS 8x digital output, 8x digital input Interface for ejector protection Interface for temperature control units, Data protocol: Engel, physical type: 20MA-CL Microflow MINI-CAM: Process parameter adjustment support based on an expert system 2-pole service socket, 230V 6x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Iasdjzcanrspfx Abvju Flow regulator 0-10 l, 4 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable. Tubing for flow controller, 4 temperature control circuits

Condition: used, Year of construction: 2003, operating hours: 6,500 h, VICTORY 200/60 Power SN 162699 Closing force (kN) 600 (expandable to 800 kN) Year of manufacture: 2003 Screw diameter 30.00 mm, L/D ratio of the mixing cylinder 20.50 Operating hours: ONLY 6,500 Vertically enlarged clamping plates (B-plates) Swiveling reject chute for reject selection, activated upon reject detection Version variant HV 2 with control pumps (pressure and flow control in a closed-loop control system) for parallel movement sequence Microcomputer CC100 A03 Kistler 5155 A2213Q02 charge amplifier with automatic switching pressure detection 4x digital output, 4x digital input Interface for temperature control units or hot runner controllers Data protocol Engel, physical type 20 mA – CL Microflow MINI-CAM - Process parameter adjustment support based on an expert system 1x service socket, 2-pole, 230V 4x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable Isdpfx Aezcanfsbvoau 2/2-way solenoid air valve, R1/4 inch Flow regulator 0-10 l, 8 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) – Switch-off function selectable.

Condition: good (used), Year of construction: 2010, Straight conveyor belt for automation (for example, 'ghost shift' intermediate buffer) Consists of two belts: one belt holds empty cartons, and the second belt holds filled cartons. Both conveyors are equipped with EUROMAP67. With this, the conveyors can be programmed together with the machine and the removal robot. Manufacturer: KRAUSS MAFFEI Year of manufacture: 2010 Length of conveyors: 6.00 m each Total width of conveyors: 1.75 m Iodpey Spixjfx Abvjau

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Hytronika Steuerung, The control units are in perfect condition. Isdpfxswpp Dqo Abveau They were completely overhauled a few years ago directly by ARBURG and come from a cleanroom production facility for medical technology. Since then, they have been stored in our warehouse as spare units, properly maintained. Price: per unit. Of the original 7 units, two are currently still in our warehouse. The other 5 units are now back in use in Greece and Bulgaria.

Condition: used, Year of construction: 2005, functionality: fully functional, clamping force: 2,500 kN, clearance between the columns: 630 mm, overall weight: 14,500 kg, heating capacity: 36 kW (48.95 HP), pump power: 75,000 W, power: 111 kW (150.92 HP), input frequency: 50 Hz, input voltage: 400 V, The following template has been translated into Hungarian and filled in with the data: "German: We offer this used ARBURG Allrounder Selecta 630 S 2500-2100 injection molding machine, manufactured in 2005." Hungarian: We offer a used ARBURG Allrounder Selecta 630 S 2500-2100 injection molding machine, manufactured in 2005. Machine number: 197628 Year of manufacture: 05/2005 Weight: 14500 kg Clamping force: 2500 kN Operating voltage: 400 V Frequency: 50 Hz Heating power: 36.0 kW Pump motor power: 75.00 kW Total installed power: 111.0 kW Pump operating hours: 38989 Automatic operating hours: 37209 The machine is used occasionally, so the operating hours may vary. Iedpfxozcdw Ds Abvoau Wittmann robot is not included in the price. If you have any questions or need further information, please send us a message or call us.

Condition: good (used), Year of construction: 2006, operating hours: 65,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, Hydraulic core pull 2x Iaedpjtqifnofx Abvou Hot Runner 4x Air valves

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Iodoy R Eq Aspfx Abvoau terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture: 2010 We offer a high-class hydraulic injection molding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system with a color monitor, an integrated operator panel, and three USB ports. Thanks to its robust construction and high performance, it is perfectly suited for the production of thermoplastic parts. Equipment Fully hydraulic clamping system MC5 control system with color monitor Integrated control panel 3 USB ports Complete plasticizing unit for thermoplastics Ø 70 mm screw made of wear-resistant material Backflow valve Open nozzle Technical data Clamping unit Parameter Value Clamping force 3000 kN Mold opening force 169.3 kN Plate movement force – opening 86.3 kN Plate movement force – closing 67.8 kN Dimensions of mounting plates (h × v) 995 × 1050 mm Clearance between columns (h × v) 630 × 630 mm Mold opening stroke 820 mm Minimum mold height 330 mm Maximum opening stroke of plates 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection unit Parameter Value Screw diameter 70 mm Maximum injection pressure 1877 bar Injection volume 1078 cm³ Injection weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220 / 310 rpm Electro-hydraulic system Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and weight Iaodpfsza Uuzex Abvsu Parameter Value Net weight 14.5 t Dimensions (l × w × h) 6.5 × 2.2 × 2.3 m

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 679 cm³, injection weight: 618 g, plate length: 955 mm, plate width: 1,050 mm, Core unit 1/1 Wittmann W621-0977 robot Iedpfx Aboy U Hcuevsau

Condition: used, Year of construction: 2001, clamping force: 4,200 kN, opening stroke: 710 mm, total length: 7,900 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, number of injections: 2, power: 68 kW (92.45 HP), Demag Ergotech 420/800 2300 with embossing function and Wittmann DR 633/CNC 6-316 robot Prices and further inventory can be found at inventar-verkauf.de/id/alesco. In addition, 2 injection molding units are included, one of which was used exclusively for clear glass. Details: Clamping force: 4200 KN Tie bar distance: 800 x 710 mm Mold opening: 710 mm Control system: Ergocontrol NC 4 Connected power: 68 KW Overall dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Wittmann DR 633/CNC 6 - 316 robot Iaedpfxey U Nkbo Abvju (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-cavity core pull 2 E/A (electrical/pneumatic) Embossing function retrofitted 2 x Injection molding unit: Injection molding unit 1 Shot volume: 891 cm³ Shot weight: 800 g (polystyrene) Screw diameter: 60 mm Injection pressure: 2420 bar Injection molding unit 2 Shot volume: 1212 cm³ Shot weight: 1090 g (polystyrene) Screw diameter: 70 mm Injection pressure: 1877 bar WITHOUT KOCH NOZZLE and PLASTICIZER. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS Iodpfx Aswvkgmsbvsau closing pressure: 1250 kN

Condition: used, Year of construction: 1999, Technical details: Iedswvkggepfx Abveau screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN

Condition: used, Year of construction: 2012, operating hours: 56,500 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 2,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iedoy N Eccopfx Abvoau