Used Inserter for sale (1,872)

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Nedpfx Aoxqmrfjgzedf Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: used, Used automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Njdpfxjx Niyre Agzjdf Regularly serviced. New 2023.

Condition: used, mileage: 1,054,617 km, power: 300 kW (407.89 HP), first registration: 06/2013, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro5, color: silver, brakes: retarder, Equipment: ABS, air conditioning, parking heater, +++Wheelchair lift+++ +++3-point belts on every seat+++ Mileage according to speedometer Engine: Mercedes-Benz Emission class: Euro 5 Gearbox: Automatic Ndedpfx Agormlu Aszef Seats: 57+2+1 sleeper seats with 3-point seat belts _____ Safety and security * Retarder * Cruise control * ABS, ASR, EBS * Fog lights * Reversing camera Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Curtains * Luggage racks * Jet ventilation * Reading lamps * Double glazing * Head leather inserts * Pushchair space * Wheelchair space * Wheelchair ramp * Request to stop * Interior camera Exterior * Matrix brand: Mobitec * Double-width door * Lifting / lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Roof hatches, fans, roof ventilator Audio & communication * Radio / CD Miscellaneous * Vehicle dimensions: Length 14.92 m, width 2.55 m, height 3.00 m * Twin tires * Hubcaps * Tires: VA 60%, MA 60%, HA 20% * Our internal vehicle number: 10175 Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: used, turning diameter over bed 460 mm Ndedpfx Asxwp Ebegzjf turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Ndedpfx Agsx Nhirjzsf Price: Upon request

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Ndedpfxex Ilx Uj Agzef Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: used, Year of construction: 1990, Design: tiltable Swivel angle forward: 45 degrees Swivel angle backward: -5 degrees Table length: 2400 mm Table width: 1240 mm Extendable frame support: Yes Ndjdpfx Agsx It Azozsf Number of spindle speeds: 4 Spindle speeds: 3000/4500/6000/9000 rpm Speed selection: pole-changing motor Speed display: LED Spindle taper: MK 5 Spindle clamping length: 150 mm Cutter arbor diameter: 30 mm Control panel position: top Spindle height adjustment: electric Spindle tilt adjustment: electric Spindle lock: yes Spindle brake: electric Extraction port diameter (fence): 125 mm Extraction port diameter (machine): 100 mm Spindle rotation direction: left/right Electrical axes: spindle height & tilting & fence adjustment Table opening closure: insert segment Fence jaws: Integral/Aigner Fence jaw dimensions: 650 / 500 mm Fence adjustment: manual Fence digital display: yes Fence jaw setting: manual Power feed unit: yes Feed rollers: 4 Feed adjustment: fixed speeds Working/table height: 850 mm Dimensions: 3000 x 1240 x 1900 mm Extraction port diameter: 1 x 125 mm, 1 x 100 mm Location: Nattheim

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: - Dowel insertion unit for simultaneous gluing and dowel driving - Dowel supply via maintenance-free vibratory feeders - Fully automatic maintenance-free electronic control with selector switch FLUSH/GLUE/GLUE & DRIVE - Self-contained glue system - 1 stainless steel container, 5 l for glue, and 1 stainless steel container, 5 l for water Nedpfx Asw Rhlhegzodf - Lightweight, easy-to-handle, and recoil-free gun for 8 mm dowels - Capacity: 45 dowels per minute - Electrical connection: 220 V, 1 Ph, 50 Hz - Compressed air connection: 6 bar - Dimensions: 650 x 650 x 1100 mm - Weight: 110 kg Availability: short-term Location: Flörsheim

Condition: used, mileage: 232,422 km, power: 375 kW (509.86 HP), first registration: 06/2014, fuel type: diesel, number of seats: 85, gearing type: automatic, emission class: euro6, color: red, Equipment: air conditioning, bathroom, navigation system, onboard kitchen, parking heater, Sleeping seats with lap belts possible, currently 81+1+1 sleeping seats with lap belts installed+++ +++Original 232,000 km+++ +++Panoramic roof+++ Engine: Paccar Emission standard: EURO 6 Total seats: 85 Seats: 81+1+1 sleeping seats with lap belts currently installed Transmission: Automatic Original mileage Safety Retarder Cruise control Adaptive cruise control ABS, ASR, ESP, EBS Fog lights Immobiliser LED lighting Brake assist Lane departure warning system Reversing camera Multifunction steering wheel Passenger compartment Auxiliary heating Wood-look flooring Air conditioning Tables Curtains Luggage racks Luggage nets Adjustable air vents Reading lamps Double glazing Footrests Kitchen Refrigerator Coffee machine Central WC Headrests Head covers Leather headrest inserts Tour guide microphone Driver microphone Audio, Communication, Electronics Navigation system Radio CD USB port at every seat Video DVD Wi-Fi Power sockets Fire detection system Inverter Exterior Tow hitch Lift/lowering system Power steering Digital tachograph card Sun visor Sleeper cab Electrically adjustable exterior mirrors Ski box hooks Central locking Roof hatches Njdpfxex Inyzo Agzsdf Panoramic roof Other German vehicle registration document Twin tires Vehicle length: 13.15 m Vehicle width: 2.55 m Vehicle height: 4.00 m Alloy wheels Front axle tires: approx. 70% Center axle tires: approx. 70% Rear axle tires: approx. 70% Our internal vehicle number: 11486 Errors excepted. Images and text may differ from the actual vehicle. Always over 300 vehicles in stock.

Condition: used, functionality: fully functional, machine/vehicle number: 3081454316, This is a vacuum packaging machine from the manufacturer Komet, model PlusVac 20, tabletop version. This vacuum unit is in exceptionally well-maintained condition. The machine underwent a comprehensive inspection in our in-house workshop (motor flushing and new pump oil), and the following parts were replaced: counter pressure bar of the sealing beam, air/oil separator element, lid gasket, lift cylinder, the sealing beam was overhauled, sealing wires and Teflon tape were renewed. The device is fully functional. You will receive an invoice with VAT shown separately. Condition: used, inspected, fully functional This unit is made of stainless steel—robust and reliable. It features a plexiglass lid, electronic controls, and a vacuum stop button. It has a double-wire sealing bar with a seal length of 405 mm. The maximum bag size is approximately 400 x 500 mm, and the chamber size is approximately 430 x 505 x 175 mm. Technical data: W x D x H: approx. 485 x 615 x 400 mm Electrical connection: V: 400 / kW: 1.078 / A: 3.487 / Hz: 50 Weight: approx. 62 kg Machine number: 3081454316 Year of manufacture: Chamber size (W x L x H / mm): 430 x 505 x 175 Controls: Standard Comfort Optional: Perfect Seal length (mm): 1 x 405 (2 x 405) Sealing bar length (mm): 420 Double seal seam Distance x (y) (mm): 455 (400) Sealing bar arrangement: Standard front, optional rear Pump (cbm/h): 21 Nodpexpxbpjfx Agzedf Power supply: 400V / 3Ph+N+PE / 50Hz Power rating (kW): 1.1 Max. bag size (mm): 400 x 500 Insert plates: 2 External dimensions (lid closed / W x D x H mm): 480 x 655 x 385 External dimensions (lid open / W x D x H mm): 480 x 655 x 920 Our used equipment service for you: - 6-month warranty on all electrical components - High-quality branded equipment at fair prices - Professional overhaul, inspection and expert cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after your purchase - Provision of operating manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 Shipping: Delivery or self-collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by arrangement Do you have any questions, need advice, or would like to view an item on-site? You can reach us by phone during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece Ndsdpox Hfdzefx Agzsf -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. Njdpfx Aox Ilx Ijgzodf It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: new, TC 205 x 1000 Nedpfxsir If De Agzsdf Center height: 205 mm Swing diameter over bed: 410 mm center width: 1000 mm bed width: 260 mm spindle nose: DIN 55029 (Camlock) 9, size 6 traverse path cross slide: 220 mm travel top slide: 125 mm spindle bore: 52,5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Stepless Mechanical preload stages: 2 motor power: 3,75 kW coolant pump: 0,13 kW longitudinal feeds Z: 0,05 - 1,7 mm/rev face feeds X: 0,025 - 0,85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametrical threads: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Internal taper quill: MK 4 quill stroke: 150 mm dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control ( 2 preload stages ) - Fine balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital display (resolution 0.005 mm) - 3-jaw lathe chuck - Quick-change tool holder with four cassettes - High splash guard rear wall and integrated LED tray light - Chip tray can be pulled out to the front - Slipping clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine shoes (1 set of 6) - Two emergency stop buttons - Foot pedal with double braking device ( mechanical and electrical ) - Limit switch secured chuck protection, rotating steel holder protection and cover of the leading and traction spindle according to the European safety standards CE - Coolant device - 2 fixed center punches - Reducing sleeve for main spindle - Operating tool - Operating tool in tool box - Operating manual with spare parts list

Condition: new, Year of construction: 2025, NEW MACHINE Polar N78 PLUS 2 Resopal air tables 75 x 75 cm, including support corners left/right 2 HSS knives Onboard tools 2.Cover plate 40 mm (cutting width 50 mm) including control documentation 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Available at short notice Technical specifications Cutting width 78 cm / 30.70" Insertion height 12 cm / 4.72" Insertion depth 78 cm / 30.70" Maximum installation height (without cover plate) 12 cm Ndsdpjxc Ughsfx Agzef Table height 90 cm Electrical power (main drive) 3.45 kW / 4.75 H.P. Net weight 1350 kg / 2970 lbs

Condition: used, mileage: 1,046,937 km, power: 315 kW (428.28 HP), first registration: 01/2022, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, +++Lift+++ +++54 sleeper seats with lap belts currently installed+++ +++1 double bench in the luggage compartment+++ +++Seats newly reupholstered+++ General Engine: Mercedes-Benz AdBlue Emission standard: EURO6 Total seats: 54 Seating configuration: 49+2+1 sleeper seats with lap belts Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon headlights * LED lighting * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger Compartment * Auxiliary heating * Wood-effect flooring * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Individual air vents * Reading lights * Double glazing * Footrests * Refrigerator * Mid-mounted toilet * Headrests with leather inserts * Tour guide microphone * Driver microphone Audio, Communication, Electronics * Navigation system * Radio, CD * USB port at each bench * USB port at multimedia system * Video, DVD * Power sockets * Power inverter Nodpfxox Inyho Agzodf Exterior * Tow hitch * Matrix/Hanover destination display system * Lift/lowering system * Power steering * Tachograph card * Sun visor * Prepared for sleeper cabin * Electrically adjustable exterior mirrors * Ski box mountings * Central locking * Roof hatches * Roof fans * Roof ventilators Other * German vehicle registration * Twin tires * Vehicle length: 13.11 m * Vehicle width: 2.55 m * Vehicle height: 3.68 m * Hubcaps * Front axle tires approx. 40% * Rear axle tires approx. 70% Our internal vehicle number: 12002 Errors excepted. Images and descriptions may differ from the actual vehicle. Always over 300 vehicles available.

Condition: used, tool clamping area 150x18 mm weight 0,001 t turning tool with insert - like new. Ndsdpfed Iha Tsx Agzsf L/W/H: 250x40x100 mm

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Ndjdpfx Aewzmu Regzsf Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nodoxwaz Hjpfx Agzjdf

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway Ndjdsb A Nm Hepfx Agzsf -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Condition: new, Year of construction: 2025, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HSS knives OPTIKNIFE knife changing device Tool kit 18.5" touch color display 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Max. insertion height 165 mm Safety pressing pressure 30 daN Press pressure, min 150 daN Press pressure, max 5,500 daN Saddle speed return (0 - ...) 300 mm/sec Nsdpfx Agsxazbtjzedf Blade speed 45 cycles/min Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Condition: new, tool clamping area 50x50 mm weight 0,003 t turning tool with insert - like new. L/W/H: 400x50x50 mm Nedpfxsd Iha Se Agzjdf

Condition: good (used), Punching machine, hydraulic punching machine, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 Nsdpfjb A H Tasx Agzedf -with hydraulic unit -Steering -Foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg

Condition: new, Year of construction: 2025, Air table Resopal Left 100 x 100 cm Right 100 x 100 cm Air corners Wide cover plate (standard), narrow cover plate (40 mm) incl. control Technical data: Cutting width: 1,150 mm Insertion depth: 1,150 mm Maximum insertion height: 165 mm Safety pressure: 30 daN Pressure (min): 150 daN Pressure (max): 4,500 daN Saddle speed (return): up to 300 mm/s Knife speed: 45 cycles/min Residual cut (automatic, without cover plate): 25 mm Residual cut (automatic, with cover plate): 95 mm Display: 18.5" capacitive touchscreen Ndodpfx Aew Dp N Nsgzef Automatic programming: graphical, with intuitive user interface Positioning accuracy: 1/100 mm thanks to DPS system Knife change: fast and precise with OptiKnife system 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Available at short notice

Condition: good (used), Punching machine, pneumatic punching machine, punching device, hole punching machine Nodpfx Asb A I Twogzsdf -Insert tool -for small stamping jobs -Control: pneumatic -Dimensions: 610/660/H1200 mm -Weight: 75 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears, long-blade sheet metal shears -Manufacturer: Victoria, long-blade sheet metal shears on a mobile base -Cutting insert length: approx. 350 mm -Steel sheet: up to approx. 4 mm Njdpfx Agjif Az Aszsdf -Rectangular profile: up to approx. 7 mm -Overall dimensions: 1030/500/H1900 mm -Weight: 109 kg