Used Insolvency for sale (73)

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near-new condition. This machine was originally used as a demonstration model at trade fairs and events and has only 1.5 operating hours. It is in top condition and fully functional. Technical Specifications and Equipment - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 1.5 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (Total working width 850 mm) - Solution / recovery tank: 300 liters - Theoretical area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete including battery, brushes, and charger Condition: The machine is in a very well maintained, almost new condition. All functions have been tested – the device is ready for immediate use. Origin: Hedpexw Rmtefx Af Aonr The device was purchased as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical specifications and descriptions are based on manufacturer information. All details provided to the best of our knowledge, but without guarantee for completeness, accuracy, or specific properties. The device is sold as described and inspected. Warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 36 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – Professional Cleaning Machine in Nearly Mint Condition This machine was originally used as a demonstration unit at trade shows and events and therefore has only 36 operating hours. It is in top condition and fully operational. Technical Specifications and Features Hedoxw Rmmopfx Af Aenr - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of Manufacture: 2019 - Operating Hours: 36 h - Drive: 36 V battery drive - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 liters - Productivity: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes, and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased as part of an insolvency auction. This is a genuine Comac product. Country of Manufacture: Italy Note: The technical data and descriptions are based on manufacturer’s information. All details are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy, or particular characteristics. The machine is sold as described and inspected, with no warranty or liability for defects. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 35 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near mint condition. This machine was originally used as a demonstration model at trade fairs and events and therefore only has 35 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2019 - Total hours: 35 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Fresh/dirty water tank: 300 liters - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling Hnedexw Rmaepfx Af Aor - Incl. brushes - Battery and charger not included Condition: The machine is in a very well-maintained, like-new condition. Origin: The device was acquired as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical data and descriptions are based on manufacturer information. All details are given to the best of our knowledge and belief, but without guarantee of completeness, accuracy or any specific properties. The device is sold as described and inspected, with no warranty or liability for material defects. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 266 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-On Scrubber Dryer Comac C85 B – Professional Cleaning Machine in Near-New Condition This machine was originally used as a demonstration model at trade fairs and events, thus it has only 266 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B - Year of manufacture: 2019 - Operating hours: 266 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Clean/dirty water tank: 300 litres - Area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Note: Brushes, battery, and charger are missing Condition: The machine is in a very well-maintained, near-new condition. Origin: The device was acquired as part of an insolvency auction. This is an original Comac product. Country of manufacture: Italy Note: The technical specifications and descriptions are based on manufacturer information. All details are provided to the best of our knowledge, but without guarantee of completeness, accuracy, or any specific properties. The device is sold as described and as inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes. Hjdpfsxw Rl Nox Af Asnr

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 48 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in almost as-new condition. This machine was originally used as a demonstration unit at trade fairs and events, and therefore has only 48 operating hours. It is in excellent condition and fully functional. Hedjxw Rkrspfx Af Asnr Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2018 - Operating hours: 48 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh water/waste water tank: 300 litres - Surface performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased at an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical details and descriptions are based on manufacturer information. All information is given to the best of our knowledge and belief, however, we do not guarantee completeness, accuracy, or specific characteristics. The device is sold as described and inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and omissions.

Condition: used, functionality: fully functional, carrying capacity per cantilever arm: 1,500 kg, load capacity: 11,000 kg, shelf height: 6,500 mm, total height: 6,500 mm, axle spacing: 1,500 mm, maximum load weight: 11,000 kg, load capacity per stand: 11,000 kg, frame height: 6,500 mm, throat depth: 1,250 mm, ELVEDI Cantilever racking, double-sided, used 🧰 Product features • Manufacturer: Elvedi • Color: white • Condition: Used • Upright: 1 unit, height approx. 6500 mm • Base: 1 unit, double-sided base 3080 mm • Arms: 24 units, arm length 1250 mm • Load capacity per upright: 11,000 kg • Load capacity per arm: 1,500 kg • Frame spacing: approx. 1000 mm • Overall height: approx. 6,500 mm 💰 Price €700,- net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment • Product number: P2742 We constantly have over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. Hsdpfx Afewhnmuo Aenr 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete handover. Whether you found out about us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, carrying capacity per cantilever arm: 1,000 kg, load capacity: 14,000 kg, shelf height: 7,000 mm, axle spacing: 1,000 mm, clearance between the columns: 1,000 mm, maximum load weight: 14,000 kg, load capacity per stand: 14,000 kg, frame height: 7,000 mm, machine base height: 400 mm, throat depth: 1,200 mm, META cantilever rack, single-sided, IPE 400, used 🧰 Product Features • Manufacturer: Meta • Color: blue • Condition: Used • Upright: 1 unit, height approx. 6600 mm, IPE 400 • Base: 1 unit, single-sided base, 1200 mm, IPE 400 • Arms: 13 units, arm length 1200 mm, IPE 120 • Load capacity per upright: 14,000 kg • Load capacity per arm: 1,000 kg • Frame spacing: approx. 1000 mm • Overall height: approx. 7,000 mm 💰 Price: € 990,- net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible by appointment at any time • Product number: P1114 We constantly have over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Changes and errors in technical data, details and prices as well as prior sale reserved! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). Hsdpfx Aszkrn Sjf Aonr ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailers of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete clearance. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), load capacity per storage section: 11,000 kg, total length: 25,000 mm, total height: 4,500 mm, total width: 1,050 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 25,000 mm, load capacity: 11,000 kg, carrying capacity per cantilever arm: 3,500 kg, load capacity per stand: 11,000 kg, frame height: 4,500 mm, load per truss pair (max.): 3,500 kg, frame width: 1,050 mm, axle spacing: 2,700 mm, transport width: 2,400 mm, transport height: 1,100 mm, transport length: 4,600 mm, SSI Schäfer PR600 pallet racking, approx. 25 linear meters, used 🧰 Product features • Manufacturer: SSI Schäfer • Color: galvanized / blue / orange Hnodjd Hkv Nepfx Af Ajr • Condition: used, see photos • Frames: 10 pcs, pre-assembled 450 x 105 cm • Beams: 36 pcs, with 270 cm clear width, I-beam 100 x 50 mm • Safety: 72 pcs, galvanized safety pins • Fasteners: 40 pcs, Hilti concrete anchors • Load capacity: 3,500 kg per level • Field load: 11,000 kg • Load capacity sign: included Over 5,000 linear meters in stock Frame heights up to 10 meters Available depths: 100, 105 cm, and 110 cm Available beam lengths: 180, 190, 200, 270, 330, 360 cm, and 370 cm Matching depth beams, shelf inserts, and shelf panels available on request 💰 Price: €1,950.00 net, excluding VAT • Quantity discount: on request • Shipping costs: Europe-wide, on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P1944 Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to change and errors in technical data, information, and prices as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description text: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a genuine all-round carefree package: 1. Flat-rate purchase: purchase of merchandise, equipment & entire stock including complete clearance. 2. Commission auction: carrying out auctions on commission. Our full service through our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling, and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a quote.

Condition: used, functionality: fully functional, total height: 6,000 mm, frame height: 6,000 mm, load capacity per storage section: 5,400 kg, clear span: 1,000 mm, load per truss pair (max.): 700 kg, ELVEDI cantilever rack, single-sided, used 🧰 Product features • Manufacturer: Elvedi • Color: gray / orange • Condition: Used • Upright: 1 piece, height approx. 6000 mm • Base: 1 piece, single-sided base 2480mm • Arm: 6 pieces, arm length 2,000 mm • Load capacity: 5,400 kg per upright • Load capacity: 700 kg per arm • Frame spacing: approx. 1000 mm • Overall height: approx. 6,000 mm 💰 Price € 550,- net excl. VAT • Quantity discount: upon request • Shipping costs: available throughout Europe upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P2846 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Hnjdpfezklurex Af Aor Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ READILY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel structure platforms immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high racking, shelving racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Carrying out auctions on commission. Our full service is provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete handover. Whether you have found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, load capacity: 6,300 kg, total height: 6,000 mm, frame height: 6,000 mm, load capacity per storage section: 6,300 kg, clear span: 1,000 mm, load per truss pair (max.): 850 kg, ELVEDI Cantilever rack, double-sided, used 🧰 Product features • Manufacturer: Elvedi • Color: grey / orange • Condition: Used • Upright: 1 unit, height approx. 6000 mm • Base: 1 unit, double-sided base 2870mm or 4700mm • Arm: 8 units, with 1220 or 2000 mm arm length • Load capacity per upright: 4,650 or 6,300 kg • Load capacity per arm: 850 or 700 kg • Frame spacing: approx. 1000 mm • Overall height: approx. 6,000 mm 💰 Price €700,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe upon request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment • Product number: P2845 We constantly have over 5000 linear meters of pallet racking in stock from numerous manufacturers (Subject to changes and errors in the technical data, specifications and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel structures immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) Hnsdpfxozklt Uo Af Aer • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission auction: Carrying out auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough cleaning. Whether you came across our heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, total length: 45,000 mm, total width: 1,100 mm, total height: 5,000 mm, load per truss pair (max.): 3,000 kg, load capacity per storage section: 9,000 kg, number of shelf rows: 1, product height (max.): 5,000 mm, load capacity: 9,000 kg, shelf height: 5,000 mm, 🧰 Product Features • Manufacturer: Jungheinrich MPB • Color: galvanized / yellow • Condition: used, see photos • Frame: 17 units, pre-assembled, 500 x 110 cm • Beams: 64 units, with 270 cm clear span, box profile 120 x 50 mm • Safety: 128 units, galvanized locking pins • Fastening: 68 units, Hilti concrete anchors • Load capacity: 3,000 kg per level • Field load: 9,000 kg • Load capacity sign: included Over 1,000 linear meters in stock Available beam lengths: 270 cm and 300 cm Matching deep stringers, infill gratings, and infill shelves available upon request 💰 Price: € 3,790,- net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment • Product number: P10040 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top warehouse equipment & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse equipment in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of mezzanine floors & steel structures immediately available • Weekly turnover of 30–50 semi-trailer loads for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Hjdpfx Afjzki Ics Aonr Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-in-one package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 2015, operating hours: 29,500 h, functionality: fully functional, machine/vehicle number: 231000, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 2,000 bar, injection weight: 434 g, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines from the current model year 2010 onwards. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. Manufacturer: Arburg Type: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Operational status: fully functional Condition: very well maintained - German origin - from first owner Extras: 2 x core pull units Thermoplastic cylinder, complete, 55 mm, highly wear-resistant Thermoplastic processing Open nozzle 55mm Hedpfx Afsw Tt R Ij Aenr Clamping plate set 570 central 125 mm Selection unit - extended graphics - extended tool protection - extended travel movements - extended clamping - production control - job change Complete documentation - electrical diagrams, etc. Injection unit Screw diameter: 55 mm Injection weight: 434 gr./PS Injection pressure: 1650 bar Injection volume: 474 ccm Clamping unit Clamping force: 200 tons / 2000 kN Tie bar distance: 570 x 570 mm Clamping plates: 795 x 795 mm Tool installation height: 300 mm Max. distance between plates: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connection value: 45 kW Visible peripheral devices are not included in the scope of delivery. The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's premises against reimbursement of freight costs - worldwide delivery possible Available from our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell our own machines purchased from ongoing production from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not an intermediary dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Offered from an insolvency sale is a fully functional panel saw. Altendorf WA 80 Year of manufacture 2004 Tilts up to 45° with motorized adjustment Motorized height adjustment With scoring saw Max. saw blade diameter 400mm Max. cutting height with a 350mm blade = 98mm at 90° --- 75mm at 45° With motor brake (approx. 4.5 seconds to stop) Carriage length 3200mm Cutting width to the right of the saw blade 1350mm Speeds 3/4/5000 rpm Hedpfx Afjzhak Ae Asnr 380 volts Weight 990kg Emergency stop button Duplex fence Wide and narrow blade guard + used saw blades as shown in the picture

Condition: excellent (used), Stow beam, 2400 mm, used 🧰 Product features • Manufacturer: Stow • Color: orange • Condition: very good, see photos • Clear width: 2,400 mm • Load capacity: 1,920 kg per level • Beam profile: 110 x 50 mm 💰 Price €17, - net, excluding VAT Hodpfxezimqle Af Asnr • Quantity discount: upon request • Shipping costs: available throughout Europe upon request • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement • Product number: P10446 Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of goods, equipment & entire inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and handover in broom-clean condition. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), functionality: fully functional, total width: 1,500 mm, total length: 3,000 mm, total height: 2,850 mm, Lotus Chemical Supply Station Used, good condition, see pictures Including control unit Length: 300 cm Width: 150 cm Height: 285 cm Power: 0.5 kVA Year of manufacture: 10/2007 Already disassembled 3 units available Hjdpetwy I Iofx Af Asnr Negotiable price: €2,500 net ex warehouse Goods are in stock. Transport and installation possible upon request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel structures immediately available • Weekly 30–50 semi-trailer truckloads of goods for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-inclusive package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling, and complete clearance. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. Hodpfovfy Sxex Af Aenr One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons)(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pumpt installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price. Hodpfov Rtg Tjx Af Aenr

Year of construction: 2018, condition: excellent (used), From an insolvency sale: Model RRI 8460 Serial no. 18/70139708 Hnodpfsk T Av Rox Af Aor with SPITZNAS tensioning device with automatic feed, model 512089940 in the original case.

Year of construction: 2005, condition: good (used), From insolvency proceedings: Spitznas Model 512120010 Year of manufacture unknown with SPITZNAS TENSIONING DEVICE with AUTOMATIC FEED, Model 512089940 Hsdpfx Aslczd Hof Aonr in original case.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine Hedpfx Afjxqhuuj Aenr We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Hedpfxex Rvcio Af Asnr Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Hsdpfeyzumzox Af Aonr Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Hnedpfxoyc Ewxe Af Aer Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! Hnjdpoyf Uy Usfx Af Asr The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: used, rotational speed (min.): 1,460 rpm, rotational speed (max.): 1,460 rpm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 250 kg, INDUSTRIAL PISTON COMPRESSOR WITH SIEMENS 1LA3 11 KW MOTOR Industrial twin-cylinder V-configuration piston compressor driven by a SIEMENS 1LA3 three-phase motor. From an industrial company liquidation (insolvency proceedings) — not faulty, fully available for inspection. ═════ COMPRESSOR SPECIFICATIONS ═════ - Type: V-configuration twin-cylinder piston compressor - Cylinder head: heavy cast iron with cooling fins - Transmission: belt drive with large flywheel - Air intake: 2 lateral filters with caps - Electrical cabinet with main switch included - Robust integrated metal base frame - Machine N°: 1101 - Estimated capacity: 1,000-1,800 l/min - Working pressure: 8-10 bar ═════ MOTOR SPECIFICATIONS - SIEMENS 1LA3 ═════ - Brand: SIEMENS (premium German manufacturer) - Model: 1LA3 163-4AA-20 - Frame size: IEC 160M - Power: 15 HP / 11 kW - Voltage: 220/380V three-phase - Speed: 1,460 rpm (4-pole motor) - cos φ: 0.86 - Frequency: 50 Hz - Protection class: IP44 - Insulation class: B - Mounting form: B3 (foot-mounted) - Standard: VDE 0530 - Serial number: LCL2055152 - Connection: VAY 38/22 The SIEMENS 1LA3 series is one of the most reliable industrial motor lines, manufactured between the late 80s and mid 90s. Known for excellent winding quality, heavy-duty bearings, and exceptional longevity. Service parts and technical support available worldwide. ═════ INCLUDED IN THE SALE ═════ ✓ Complete twin-cylinder compressor head ✓ SIEMENS 1LA3 11 kW motor ✓ Belt drive system with large flywheel ✓ Two air intake filters with caps ✓ Electrical cabinet with main switch Hsdpfx Afszawude Aenr ✓ Robust metal base frame NOT INCLUDED: ✗ Air tank / receiver (must be added by buyer) ═════ CONDITION ═════ - From industrial closure (not from breakdown) - Good general appearance, clean and complete - SIEMENS motor — premium brand with worldwide service and spare parts availability - Sold as-is, full inspection welcome before pickup - No warranty implied ═════ APPLICATIONS ═════ Professional industrial compressor suitable for: - Medium-sized mechanical workshops with multiple simultaneous pneumatic stations - Metal and aluminum carpentry workshops - Body shops and industrial paint booths - Boilermaking with heavy pneumatic tools - General light industrial production - Tire shops and automotive workshops Equivalent new compressor on the market: €4,500-7,000 The motor alone (SIEMENS 1LA3 163-4AA-20 IEC 160M) has a standalone resale value of €400-700 as an industrial spare part. ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain - Weight: approx. 250 kg - Loading: forklift required at pickup - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport and customs