Used Internal Thread Gauge for sale (13,144)

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). Ndodpfx Aoiqkb Rsmtjc type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation Nedpfji Eg Nksx Amtsdc -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: used, Wide-track high-lift truck, pedestrian stacker, drawbar stacker HANSELIFTER - Hanse-Lifter, Model E-SDJ1016-01 Wide-track lift truck Standard model. Year of manufacture: 2014 Rated load capacity, drawbar stacker: 1000 kg Load capacity, special attachment GIESLER: 200 kg Rated lifting height: 1600 mm Fork length: 530 / 770 mm Fork carriage width: 950 mm Ground clearance under wheel arms: 130 mm Operating voltage, hydraulic unit: 12 volts Overall height: 2160 mm Overall length: 1650 mm Overall width: 1860 / 1200 mm - Manual drive operation - Electro-hydraulic lifting mechanism - Adjustable track width from 950 to 1650 mm (width between wheel arms) - 1 piece, 12-volt battery - Separate charger, 12 volts, 15 amps Nedpfx Ashxvuwjmtedc - Fork base carrier on lifting frame made of steel - Fork carriage, special attachment GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Fork tines made of stainless steel, total length 770 mm to pivot plate - Fork tines cannot be lowered to the ground due to the special attachment (approx. 170 to 250 mm depending on track width) Self-weight: 485 kg Like new condition

Year of construction: 2002, condition: refurbished (used), On behalf of a client and for their account, I am offering a VOUMARD 150 CNC L 1300. The machine is equipped with: 4-position turret, 3 internal tool stations, 1 empty station for external tools pneumatically swiveling tool rest Nsdegigv Djpfx Amtedc Maximum diameter 350 mm Maximum length 1,300 mm CNC Fanuc 32i extensive range of accessories, including several hydraulic steady rests, power chucks, etc. See "Documents" for details. The machine can be inspected in the owner's workshop while it is running. The machine was completely overhauled in 2016. In addition, I am offering 2 Voumard VMX 90 A grinding spindles, one new and one completely overhauled. These can also be purchased separately.

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Ndsdst Hw N Tepfx Amtec dimensions of the machine ca. m

Condition: used, Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm Njdpfxjfyh Ebo Amtodc -Weight: 64 kg

Condition: used, Lever measuring device, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert -Measuring range: 1mm -Reading: 0.001 mm -Scale: 0-100-0 Nsdsfnzbujpfx Amtedc -Tolerance marks: adjustable -Price: per piece -Number: 4 pieces -Dimensions: 135/65/30 mm -Weight: 0.2 kg

Condition: used, Micrometer, micrometer screw -Measuring range: 125 - 150 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available Ndedpfxsfn Am Ro Amtoc -Dimensions box: 330/180/H30 mm -weight: 1.1 kg

Condition: used, Micrometer, micrometer screw Nodpfx Amjfn Am Tstjdc -Measuring range: 75 - 100 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available -Dimensions box: 265/145/H30 mm -Total weight: 0.7 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock,Tapping machine, pipe thread cutter, cutting head -Thread cutting head: 1/2- 2 " -Cutting jaws: R1 -1 1/2 " -Dimensions: 870/110/H200 mm -Weight: 11 kg Nedpfxef Ec S Ss Amtjdc

Condition: good (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer -for diameters: 20 - 60 mm -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available Ndedpfxjd Sdl Is Amtec -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete Ndsdpfx Aouu U T Ssmtjc -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

Condition: used, Year of construction: 1979, workpiece diameter 320 mm Ndodpfx Amjt Hwnpotec threading length 300 mm thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW Ndedpfx Ajt Hwn Nomtoc weight of the machine ca. 1500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. Ndedpew Dugasfx Amtec *

Condition: good (used), Threading machine, bench drill, pillar drill Ndsdpfoyvfzwox Amtsc Manufacturer: Hagen

Condition: good (used), Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill Ndjdpfx Aeyuu H Hsmtec -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Condition: new, Year of construction: 2026, Tapping Head Spindle Positioner 90° CORMAK GT24 The 90° GT24 tapping head spindle positioner is an advanced tool that significantly improves precision and efficiency in thread-cutting operations. Its main function is to ensure accurate alignment of the electric tapping machine at a 90° angle to the workpiece, allowing perfect spindle adjustment. Thanks to its innovative design, the GT24 positioner guarantees high accuracy and reliability, making it an essential accessory in any threading or machining workshop. Main Advantages of the GT24 Positioner Precise alignment: The positioner enables quick and accurate alignment of the tapping arm at a 90° angle to the workpiece, which is essential for achieving top-quality threads. Ease of use: The positioning process is quick and intuitive, saving time and increasing productivity. High stability: Thanks to its neodymium magnet, the positioner provides strong and secure attachment to the workpiece, minimising the risk of errors during threading. Compatibility: The GT24 positioner is compatible with a wide range of electric tapping machines available on our website, including models such as RGE30PW, RGE36PWx1200, and RGE36PWx1700. Robust construction: The GT24 positioner is made of high-quality materials, ensuring durability and resistance to intensive industrial use. Design and Technology of the GT24 Positioner The GT24 positioner features a sturdy construction designed for intensive use. Its key component is the neodymium magnet, which allows quick and reliable attachment to the workpiece. This technology gives users full control over accurate machine positioning, helping them achieve excellent results in less time. The unit also includes a 90° calibration system that allows precise setting of the tapping arm at a right angle. This setup enables quick adaptation to different threading tasks, making the GT24 a highly versatile and practical tool for any professional or production environment. Precision and Efficiency with the GT24 Positioner The GT24 positioner provides both precision and productivity. With its fast and simple positioning process, users can save valuable time otherwise spent on manual spindle adjustments. The alignment system ensures exceptional accuracy, resulting in better thread quality and reduced risk of machining errors. Furthermore, the positioner allows flexibility when working with various materials and thread types, making it an indispensable tool in production processes. Technical Specifications of the GT24 Positioner Ndsdoycvfyepfx Amtjc Type Neodymium adapter for spindle positioning Compatible with tapping machines RGE36PWx1200, RGE36PWx1700, RG24x1200, RG24PWx1200, RG24PWx1700, RG36PWx1200, RG36PWx1700 Angle range 90°

Condition: used, Year of construction: 1994, Thread Rolling Machine EWMenn GW63 Flat dies Year: 1994 Nedpfx Aoylw E Tsmtodc Diameter range: max 8 mm Shaft length under head: 80 mm Max. thread length: 58 mm

Condition: used, thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head -Type: SH 1 1/4" -Shaft: Ø 40 x 100 mm -Dimensions: 170/155/H225 mm -Weight: 8.6 kg Nedpfju S Tbujx Amtsdc

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches Ndjdpfx Ajwq Nvijmtjc -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm -Weight: 50 kg

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. If interested, we will also be happy to inform you about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Ndedpsxbzgxjfx Amtsc

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Nodpfsyg Nvtsx Amtsdc

Year of construction: 2009, condition: ready for operation (used), Offered is a precision internal grinding machine. Grinding range: max. Ø 357mm x 315mm, control system: CNC control system. Equipped with full enclosure, workpiece spindle head, grinding spindle carrier, separate control cabinet, extraction pipe routing. Weight: approx. 5200kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection possible by arrangement. Ndodpey Ulm Eefx Amtsc

Condition: used, Thead Roller TLM RP8 TLM TORTONA Year: 1995 Diameter range: 3-8 mm Shaft length under head: 90 mm Nedpfx Asx Aqpromtodc Max. thread length: 52 mm Dies size:130/115x54