Used Internal Thread Gauge for sale (12,413)

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: NOH337-17, ABUS ELV crane kit, crane runway, bridge crane, indoor crane Load capacity / lifting capacity: 10t - 10,000kg Runway gauge: 12,990mm, overall external length approx. 13,250mm Year of manufacture: 1993, with radio remote control Nwjdpfx Agexz Tvrjzjr Lifting height: 6m Construction height (top of crane to hook): approx. 950mm End carriage length with buffer: approx. 260cm Crane is dismantled and immediately available Very good condition, inspection book is available Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible, please enquire with postal code Collection preferred

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm metric thread M 33 Messing metric thread M 16 Gußeisen metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten throat 220 mm Nodjul Eg Djpfx Agzjwr weight 730 kg

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Nsdpfjwk Nxqox Agzowr Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group Nedpfxelcbkgs Agzowr - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Make: FORST Nwsdpsv Htluefx Agzjr Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled Nwedpexltzvofx Agzer  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: used, Year of construction: 1983, Min./max. diameter of ground bore: 10-250 mm Nwsdpfx Agex Alalezor Max. grinding length: 500 mm Max. swing diameter: 400 mm Max. workpiece length: 1,000 mm Workhead spindle speed: 25-450 rpm Grinding spindle speed: 8,800-31,000 rpm Workhead swiveling range: 15° Total power requirement: 9 kVA Machine length x width: 4,400 x 2,020 mm Total machine weight: 4,400 kg

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Tapping chuck: MK2 mount -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm Nwedexrmp Topfx Agzer -Weight: 1.4 kg

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition Nwjdoxf Uwxspfx Agzer

Condition: excellent (used), Thread cutting steel (108141) Make Comet Type FG 2 for external thread With threaded steel 60 degrees and threaded steel 55 degrees Nsdpoigqr Rofx Agzowr in wooden case

Condition: good (used), Max. drilling capacity ∅20 mm/ 600 N/mm2 Total stroke 125 mm Working stroke, continuously adjustable 125 mm Feed force at 6 bar 4130 N Max. transferable. Torque 80 Nm Speed range at 50 Hz 360–5800 min-1 Speed range at 60 Hz 432–6960 min-1 Max. permissible speed 8000 min-1 Feed rate 30–2400 mm/min Air consumption 0.45 l/cm stroke Concentricity 0.01 mm Tool holder – standard ISO 30 / HSK 50 Inductive limit switch 24 V Normal voltage 230/460 V Motor speed at 50 Hz 2900/1450/970 min-1 Motor speed at 60 Hz 3480/1740/1160 min-1 Motor power at 50 Hz 1.5 kW / 1.1 kW Nwjdjvxryhjpfx Agzjr Motor power at 60 Hz 1.8 kW / 1.3 kW Weight / color 73 kg / RAL 5012

Condition: excellent (used), • Sturdy, stable aluminium base Njdpfxjw Rdt Io Agzowr • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: like new (used), functionality: fully functional, Thread rolled both ends the same time! Diameter range M6-M16 Max total length 600 mm. Max threaded length 60 mm. Nwsdpfx Ajwalx Ejgzjr Adjustment is not difficult at all. We could offer machine with dies according to your wish, be made by our factory too. We are located at Athens, Greece, near to the center. You can view machine under power after appointment.

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts Nwsdpfx Agowub Ekszor -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min Nwedpfxsxr Aw Tj Agzjr - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Nwodpfexyk S Ujx Agzjr

Condition: used, This listing is for the Mitutoyo BM1-8-1B/PD Gauge block set Nwodpfx Agoxv A Rzjzor The unit is in full working condition and is ready for immediate release This Mitutoyo 81-piece rectangular steel gauge block set is crafted from high-chromium alloy steel and features an ultra-micro-lapped surface finish for precision and durability. Carefully heat treated and stress-relieved, these blocks provide exceptional wear resistance, stability, and wringing performance, ideal for high-precision calibration, inspection, and tooling environments. Mitutoyo gauge blocks meet or exceed all internationally recognized standards (ASME, ISO, JIS), with flatness, parallelism, and surface finish that often surpass government specifications

Condition: excellent (used), Professional measuring station from the renowned brand DIATEST Germany, equipped with a precision digital indicator Mitutoyo ID-C112B (Code No. 543-250B). The set is intended for precise measurement of heights, depths, diameters, clearances, or rolling elements in measurement labs, workshops, and quality control departments. • Base manufacturer: DIATEST Germany • Indicator: Mitutoyo ID-C112B / Code No. 543-250B • Measuring range: 12.7 mm • Resolution: 0.001 mm • Functions: "ZERO/ABS", "HOLD", "mm/inch" • Sturdy cast iron base with adjustable table • Technical condition: very good, functional, ready for use Nodoxuibwjpfx Agzswr • Minor signs of use on the base's paint The price refers to one piece (complete set: base + Mitutoyo indicator). Shipping or personal pickup possible.

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - center height : 102 [mm] - Max. part length : 230 [mm] - X/Z stroke : 450 / 200 [mm] - Rapid traverses rates (X/Z) : 12000 [mm/min] SPINDLE SUPPORT - Number of spindles : 1 - Spindle speeds : 42.000 [rpm] - Power : 3 [kW] PART-HOLDER HEADSTOCK - Speed : 1500 [rpm] Nodpfxjxylwfj Agzswr - Power : 1.4 [kW] - Spindle passage : 28.6 [mm] - Type of cone : A2.4/CM5 - B axis adjustment angle (manual) : +/- 2 [°] - C axis indexing precision : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 34 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS - Number of hours under power : 1022 [h] EQUIPMENT - CNC : Fanuc 0i-TFP - Software StuderSIM - Coolant tank - Coolant through spindle - Oil mist extractor - Diamond grinding device - Workpiece probe

Condition: used, 2 Used Thread Rolling Machines WMW UPW25 Nwodpfx Agsx Dmnyszor ---Only 10.000,00 Euro---

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min Nodpfsxr Aw Hsx Agzjwr - Installed power: max. 88 kW - Machine weight: 12,410 kg

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, measuring range Y-axis: 1,000 mm, plate length: 1,200 mm, plate width: 800 mm, machine/vehicle number: 1162, No reserve price – guaranteed sale to the highest bidder! The machine is auctioned due to a business closure. Submitting a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Measuring range: up to 1,000 mm Plate dimensions: 1,200 x 800 mm Nodpfx Asxqqdljgzowr MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,200 x 800 x 2,200 mm Weight: 500 kg EQUIPMENT Granite measuring plate

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Njdpjw Rv Tasfx Agzjwr Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. *

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Nwodpfx Agju Ngybszsr Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, 86 sets available (2 pcs. per set)different sizesmore information under "Download" Nwodjdc A Saepfx Agzjr