Thread cutting head

REMS 2 1/2 bis 4"

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound Iaedev U A Izjpfx Ab Tjp - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm Iaodst Uw Avjpfx Ab Tep weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Iaedpfsv Igghox Ab Top Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° Isdsx Avr Sspfx Ab Tjap number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: excellent (used), Viessmann Vitoplex 120 kW. Low-temperature boiler with oil or gas burner. 1.0-9.5 Iajdpfx Abexgnx So Tsp

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg Iaodpfx Abetzf N Rj Tep

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Iaedpfxjx S Hm Ij Ab Tep Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Isdjv Igg Iopfx Ab Tsap Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Year of construction: 2008, condition: used, functionality: fully functional, Unit was used for grinding oil cleaning for carbide machining. Eckert cooling unit 3 filter towers with sludge bag Filter capacity 80-100 l/min. Isdpjlczcwofx Ab Tsap Filter fineness 3-5 µm In the description the unit is described with sludge drum, technical data are similar. Original instructions available in paper form Videos available on request.

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 Iajdpfeydvfcjx Ab Tsp revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm