Thread cutting machine

REMS Multi

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm Lodpemhhf Sefx Ah Sjaf - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Description Turning diameter over bed: 350 mm Turning diameter over support: 200 mm Turning length: 500 mm Speed range: 34-1500 rpm Space requirement approx.: 1600 x 1000 x 1400 mm Ledpovkxiyefx Ah Seaf Total power requirement: 2.2 kW Machine weight approx.: 1 t SYSTEM for thread cutting needs to be overhauled, not active. 1 used COLCHESTER STUDEN center & spindle lathe

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Ljdpfsd H Irfjx Ah Soaf Frame outer dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm 2 heating rails

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, overall weight: 320 kg, Universal Lathe 330 × 750 mm The machine is designed for machining workpieces, most commonly with surfaces of rotational solids (shafts, cones, spheres, internal and external threads). The machining tool is usually a turning tool, drill, or threading tools. Thanks to modern solutions and equipment, the lathe is perfectly suited for professional and industrial work. Equipment 3-jaw chuck 160 mm Coolant system Dead center MT3 Lathe stand Change gears for thread cutting Work light Optional equipment 2-axis digital readout (DRO) Technical Specifications Turning diameter over bed – 330 mm Lsdpfx Ajyvfzqeh Seaf Maximum workpiece length – 750 mm Maximum turning diameter over cross slide – 220 mm Chuck – 160 mm Spindle bore – 38 mm Spindle taper – MT5 Number of metric thread types – 20 Metric thread range – 0.5 – 4 mm Inch thread range – 9 – 40 T.P.I. Longitudinal feed – 0.135 – 1.80 mm/rev Tailstock quill travel – 70 mm Tailstock taper – Morse 3 Number of spindle speeds – 12 Spindle speed range – 60 – 1650 rpm Motor – 1.1 kW Dimensions (L × W × H) – 1330 × 750 × 700 mm Weight – 320 kg Delivery to the customer is possible. Delivery cost is determined individually according to the transport company quotation. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2026, Universal Metal Lathe CORMAK 410 × 1500 mm The CORMAK 410 × 1500 universal conventional metal lathe is a professional machine designed for precision machining of shafts, bushings, threads, cylindrical surfaces, and tapered surfaces. Thanks to its large distance between centers, rigid bed construction, and extended standard equipment package — including a 20 × 20 mm indexable turning tool set and a precision MT4 live center — it provides a complete machining solution for industrial plants and professional workshops. Main Advantages of the Machine Large 1500 mm distance between centers – enables machining of long shafts and large-length components. Rigid cast iron bed and base construction – hardened and ground working surfaces minimize vibration and ensure high machining accuracy. Large 52 mm spindle bore – allows machining of pipes and workpieces with larger diameters. Precision spindle bearing system – reinforced spindle support guarantees long-term accuracy and reliable operation. Removable bed gap section – enables machining of components with diameters up to 580 mm. 3-axis digital readout system – optical scales provide accurate control of carriage positioning. Lasdpfx Aherh E Smj Sef 16 spindle speed ranges – allows precise cutting parameter selection within a range of 45–1800 RPM. Direct thread selection system – enables machining of a wide range of metric, imperial, module, and DP threads without changing gears. Standard Equipment Set of turning tools 20 × 20 mm – 7 pcs. (with indexable inserts) Precision live center MT4 6 vibration isolators 3-axis digital readout system (optical scales) 3-jaw chuck 200 mm with complete set of jaws 4-jaw independent chuck 250 mm Faceplate 350 mm Fixed and follow steady rests Fixed center MT4 Spindle reducing sleeve MK6/MK4 Complete set of change gears Coolant system with pump Work lighting Lubricator, keys, and service tools Safety guards compliant with CE standards Operating manual and CE Declaration of Conformity Technical Specifications Parameter Value 3-jaw chuck 200 mm Maximum turning diameter over bed 410 mm Maximum turning diameter over cross slide 255 mm Maximum turning diameter in bed gap 580 mm Bed gap length 190 mm Distance between centers 1500 mm Center height 205 mm Compound slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 1150 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges, 45–1800 RPM Available spindle speeds 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 RPM Metric threads 42 ranges, 0.2–14 mm/rev Imperial threads 42 ranges, 2–72 TPI Module threads 18 ranges, 0.3–3.5 mm DP threads 21 ranges, 8–44 DP Longitudinal feeds 17 ranges, 0.05–1.7 mm/rev Cross feeds 17 ranges, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power (S1/S6) 2.2/2.64 kW or 3.3/3.96 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2440 × 900 × 1660 mm Net weight 1800 kg

Condition: good (used), Thread cutting machine with Stehler jaws, thread cutting head -Hole diameter: 190 mm Lasdpfxob A Ncue Ah Ssf -Size: 1/2 - 2 inches -Weight: 130 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock,Tapping machine, pipe thread cutter, cutting head -Thread cutting head: 1/2- 2 " -Cutting jaws: R1 -1 1/2 " -Dimensions: 870/110/H200 mm -Weight: 11 kg Ledpfof Ec S Ssx Ah Sjaf

Condition: new, Precision full gear, lead, pull, switching spindle Lathe, bed and gear wheels hardened and ground. Main spindle, tapered roller bearings and V-ledges, face/top slide adjustable. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, Laedpfjvrv Ehsx Ah Sef High cutting performance, DIN acceptance protocol, Operating and spare parts list. Without oil filling. Standard equipment: 3-axis digital display. Base frame Foot brake Coolant system Halogen lamp 3-jaw American chuck 160 mm 4-jaw American chuck 200 mm Faceplate 250 mm 2 steady rests Technical data: Center height 165 mm Center width 1100 mm Spindle bore 38 mm Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 65 to 1810 rpm Speeds 18 Main motor output 2 kW S6 (1.5 kW S1) Weight 540 kg