Used International for sale (9,759)

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm Gusdpozizl Rjfx An Eoi External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller Gusdpezizmzefx An Eji LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Dimensions: Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: used, mileage: 28,874 km, power: 96 kW (130.52 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,204 mm, total width: 2,098 mm, total height: 2,349 mm, loading space length: 2,797 mm, loading space width: 2,143 mm, loading space height: 400 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sales excepted! Internal number: 1039. LY79216 ----EQUIPMENT * Airbag (passenger side) * Trailer hitch, fixed - 13-pin including trailer stabilization (TSC - Trailer Sway Control) * Seat Package 29 - Driver's seat, 4-way electrically adjustable (forward/backward, backrest, seat cushion tilt, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height-adjustable - Tray integrated in the double passenger seat (foldable) - Front seat heating - Interior armrest for driver - Lumbar support, manual (driver's seat) - Airbag passenger side, front head/shoulder airbags and front side airbags - Seat upholstery: fabric * Transmission: 6-speed manual * Anti-lock braking system with electronic brake force distribution (EBD) * Axle load increase - front to 1850 kg * Airbag driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, long arm - with integrated turn signals * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat * Roof, overhead storage compartment at the front * Roof marker lights * Double cab - 2nd row of seats with a 4-seat bench including 4 headrests, 3-point seat belts and two ISOFIX mounts - Storage compartment under the seats in the 2nd row - 2 rear doors with fixed windows - Complete headliner * Tachometer * Electronic safety and stability program (ESP) with traction control (TSC) - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake assist including emergency brake light - additionally with trailer stabilization only in conjunction with a towing device * Front electric windows - with quick-down/up function for the driver's side * Ford Easy Fuel - Convenient fuel filler and misfueling protection * Generator * Cruise control including leather steering wheel * Glove compartment with lockable lid * Interior lighting with delay function and reading lights at the front * Air conditioning at the front including dust and pollen filter * Fuel tank 70 liters * Paint: Solid color * Leather steering wheel * Steering column, adjustable in height and reach * Fog lights * Particle filter: Diesel particulate filter * Flatbed: Standard flatbed (wide) - Front bulkhead extension, retaining straps for tailgate Gusdpfx Anj Akiqpj Eji * Radio: Audio system 13 - Radio (FM/AM) - DAB/DAB+ - MyFord Dock - FordPass Connect - Four speakers, antenna - Audio remote control on the steering wheel - Bluetooth interface - USB port - Hands-free system * Headlights with static cornering lights * Headlight low beams with delayed switch-off * Power steering * Seat belts - Seat belt pretensioners and force limiters in the front - Warning system for driver's seat belt not fastened * Daytime running lights * Recirculation mode * Immobilizer * Heat-reflective glazing, slightly tinted * Central locking with remote control ... and more ----The vehicle has not been detailed! Nationwide delivery possible for an extra charge. Errors and prior sales excepted. We will gladly accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any further questions? We would be happy to advise you!

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Gjdpfx Anozimg Ho Eeui Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Type: B 6030 Incubation chamber Volume: 30 liters Manufacturer: Heraeus Gusdpfezdtiqox An Eei External dimensions: Height 552 mm x Width 552 mm x Depth 610 mm Internal dimensions: Height 231 mm x Width 352 mm x Depth 370 mm Nominal temperature: 50°C Connection: 220V 50/60 Hz 1.00 A 0.22 kW Weight: approx. 41 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Heraeus Type: SUT 6060 Drying cabinet / hot air sterilizer Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 339 mm, Width 403 mm, Height 380 mm External dimensions: Depth 535 mm, Width 744 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Rated current 7.1 A, Rated power 1.64 kW Guedozdti Dspfx An Eoi Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Gusdpszqab Tsfx An Eoi Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC lathe Okuma LU 3000 EX 2ST-600, 224198 Control: OSP-P300LA Year of manufacture: 09/2019 Internal machine number: 85 Turning length: 600 mm Maximum turning diameter: 410 mm Swiveling diameter over bed: 580 mm Spindle speed: 50 - 5,000 rpm Guodpo Ah Satjfx An Eei 2 tool turrets A-turret: 12 tool stations B-turret: 8 tool stations Equipment / accessories: - Chip conveyor - One Touch IGF - Blum 3D measuring probe tool monitoring system - Reinforced coolant pump, 80 bar, Interlit Drum filter with additional water tank and high-pressure pump, 80 bar - Hainbuch clamping chuck, Kombi 100 - Automatic door - Touchsetter

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 12 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,263 kg, empty load weight: 737 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,735 mm, loading space height: 1,800 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible. 5 units in stock, RAL 7043 15 units available shortly, RAL 7043 Other designs and sizes available from the Paderborn warehouse. You can view our stock on our website. Skip container according to DIN standard. Technical description: * Internal dimensions: 3735 x 1720 x 1800 mm * Usable volume: 10 cbm * Unladen weight: 737 kg * Floor 5 mm S235 * Sides 3 mm S235 * All sheets and profiles are continuously welded * Asymmetrical * Container tested and approved according to DGUV rule 114-010 * Corner reinforcements * Double-sided 3-point tilting bearing (bolt Ø45) * Stacking rail L-profile * Securing rail * Frame edge U 80x50x4 * Interior and exterior zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) * Permissible total weight 10,000 kg * Container, skip, construction container, tilting skip, construction debris container, rubble skip Errors and prior sale excepted. Photos are for example purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us. Godj Aifbaepfx An Eeui

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 5 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,092 kg, empty load weight: 908 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,875 mm, loading space height: 2,000 mm, Price upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Gsdpfj Aifbdjx An Eeui Europe-wide delivery possible upon agreement. Leasing/rent-to-own options available. 5 units available on short notice, other RAL colors available upon request. Other designs and sizes available from stock in Paderborn. You can view our stock on our website. Skip containers according to DIN standards. Technical description: * Internal dimensions: 3875 x 1720 x 2000 mm * Usable volume: 10 cbm * Tare weight: 908 kg * Bottom: 5 mm S235 steel * Sides: 3 mm S235 steel * 2 steel lids, torsion bar spring, vertically liftable * All sheets and profiles continuously welded * Asymmetrical * Container tested and approved according to DGUV rule 114-010 * Corner reinforcements * Double-sided 3-point tipping bearing (bolt Ø45) * Stacking rail, L-profile * Securing rail * Frame edges U 80x50x4 * Inside and outside with zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Container, skip, construction container, tipping skip, construction waste container, rubble skip Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 9 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,450 kg, empty load weight: 550 kg, loading space volume: 5 m³, loading space width: 1,720 mm, loading space length: 3,000 mm, loading space height: 1,230 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Godpfx Anj Aifble Eoui Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery is possible by arrangement. *Leasing/hire purchase possible. 6 units in stock, RAL 7043 9 units available in the short term, other RAL colors available on request Other models and sizes available from the Paderborn warehouse. You can view our stock levels on our website. Skip containers according to DIN Technical description: * Internal dimensions: 3000 x 1720 x 1250 mm * Usable volume: 5 cbm * Unladen weight: 550 kg * Base 5 mm S235 * Sides 3 mm S235 * All sheets and profiles continuously welded * Asymmetrical * Container tested and approved according to DGUV Rule 114-010 * Corner reinforcements * Double 3-way tipping bearing (pin Ø45) on both sides * Stacking rail, L-profile * Securing rail * Frame edges U80x50x4 * Zinc phosphate primer inside and out, painted externally with synthetic resin paint (80-100 μ) * Permissible total weight 10,000 kg * Container, skip, construction container, tipping skip, construction waste container, debris skip Errors and prior sale excepted. Photos are for illustrative purposes! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,855 kg, empty load weight: 2,145 kg, loading space volume: 17.3 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,250 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible! 4 units available in the short term; other RAL colors available on request. Gjdpfxe Aifbpe An Ejui Technical description: • Internal dimensions: 6000 x 2300 x 1250 mm • Usable volume: 17.3 cbm • Tare weight: 2145 kg • Floor: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles continuously welded • Double-wing door with safety lock • Container tested and approved according to DGUV Regulation 114-010 • Warning markings according to DIN 67520 • Standard ladder, screwed on, galvanized • Floor-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Upper frame, round tube Ø 89 mm • Mesh hooks • All moving parts greaseable • Steel rollers 159×6.3, length 300 mm • Zinc phosphate primer inside and out, painted on the outside with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg • Container, storage container, roll-off container, hook lift container, large-volume container Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit including 19% VAT.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,380 kg, empty load weight: 2,620 kg, loading space volume: 31.1 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 2,250 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible. 3 units available in the short term, other RAL colors available on request. Other designs and sizes available ex warehouse Paderborn. You can view our current stock on our website. Technical description: • Internal dimensions: 6000 x 2300 x 2250 mm • Usable volume: 31.1 cbm • Tare weight: 2620 kg Gedpfj Aifb Tjx An Eoui • Floor: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles continuously welded • Double-wing door with safety lock • Container tested and approved according to DGUV rule 114-010 • Standard ladder, bolted, galvanized • Floor-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Top frame: round tube ∅ 89 mm • Mesh hooks • All moving parts lubricated • Steel discharge rollers 159 x 6.3, length 300 mm • Inside and outside with zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg • Container, storage container, roll-off container, hook lift container, large-volume container Errors and prior sale excepted. Photos are for illustrative purposes only! For further questions, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 533 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, table width: 600 mm, table length: 1,200 mm, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill CE1000 was manufactured in 2023. It features an X-axis travel of 1,060 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill CE1000 vertical machining centre we have for sale. Contact us for further details. - Coolant Supply Through Spindle / High Pressure: 20 bar- Rated Power: 30 kVA- Voltage: 400 V (3-Phase, 50 Hz)- Full Load Current: 52 A- Max. Current Load: 250 A- Short-Circuit Resistance: 25 kA- Spindle Hours: 533 h- Power-on Hours Machine / Control: 2,410 h / 2,436 h- Tool Changer: 40-fold ISO 40- Internal Coolant Supply (IKZ): 20 bar with belt filter system- Equipment: Documentation/Manual, chip conveyor, external high-pressure coolant unit/tank with filtration, pneumatic maintenance unit, electronic handwheel- Condition: Very good, fully functional; checked in late 2025 by POSMILL with no defects found, proofs available- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)- Measuring Systems: Heidenhain linear measuring system (X, Y, Z), Wireless Pick Up tool measuring system 35.40 TS, Workpiece measuring system 25.50-HDR Technical Specification Guodpfoznkrdex An Eoi Through-spindle Coolant Yes Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: SIEMENS, controller model: 840D - Powerline, total height: 3,000 mm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, swivel angle A-axis (min.): -109 °, swivel angle A-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis CHIRON FZ 15K S FA vertical machining centre was manufactured in 2009. It features a HSK-A63 taper, complemented by a swivel-roundtable with dual 280 mm clamping surfaces. The machine includes a 48-station chain magazine and an internal cooling unit with a 70 bar filter. Ideal for complex machining tasks, the CHIRON FZ 15K S FA represents a robust addition to any production line. Reach out for more information. Additional equipment • Position sensor: Direct Scales in all Axis • Chip management: Chip flushing and chip conveyor • Cooling management: Internal cooling unit with filter, 70 bar • Workpiece measurement: Preparation Touchprobe, Renishaw • Oil mist separation: Electrostatic extraction, LTA • Fire-extinguishing system: Kraft + Bauer • Automation: Automatic door • Further Accessory: Rinsing pistol Machine Benefits Technical Machine Benefits • Clamping surface: 2x roundtable ø280 mm • Comprehensive cooling management with internal cooling unit and 70 bar filter • Advanced chip management with chip flushing and chip conveyor Gjdpfe Aifupex An Ejui • Direct scales in all axes for precise positioning • Electrostatic oil mist extraction for a cleaner working environment • Fire-extinguishing system for enhanced safety • Automation features including an automatic door • Chain magazine: 48 stations • Spindle technology: motorspindle • Nc-swivel-roundtable technology: swinging bridge with 2 roundtables Extra Information Machine still under power Dimensions Machine Depth 4000 mm Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2015, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, ARKU EdgeRacer ER 1500 D – Double-Sided Deburring and Edge Rounding Machine The ARKU EdgeRacer ER 1500 D is a high-performance industrial machine designed for automatic deburring and edge rounding of sheet metal components. Working width 1300 mm Thickness minimum 0,8 mm Thickness maximum 100 mm The machine processes both the upper and lower sides of metal parts simultaneously in a single pass, significantly reducing production time and manual finishing work. What is this machine used for? Removing sharp edges and burrs from laser-cut, plasma-cut and punched metal parts. Rounding internal and external edges for improved safety and surface quality. Preparing sheet metal components for painting, powder coating and further processing. Improving edge quality for welding and assembly. Processing steel, stainless steel and aluminium components. Finishing complex sheet metal parts with holes, slots and internal contours. Who is this machine interesting for? Laser cutting companies – Finishing laser-cut sheet metal parts quickly and efficiently. Sheet metal fabrication companies – Automatic deburring and edge rounding in production. Steel service centres – Processing large quantities of cut metal components. Stainless steel manufacturers – Producing smooth, safe edges on stainless steel parts. Automotive suppliers – Finishing precision sheet metal components. Machine builders – Preparing metal parts for assembly, welding and coating. Electrical cabinet manufacturers – Removing sharp edges from panels and enclosures. Subcontractors – Providing professional deburring services to industrial customers. Main advantages The major advantage of the EdgeRacer ER 1500 D is its double-sided processing technology. Unlike conventional deburring machines, which often require components to be turned over and processed twice, the EdgeRacer finishes both sides in one operation. With a working width of 1,500 mm, the machine is particularly interesting for companies processing medium to large sheet metal components. Typical industries: Sheet metal fabrication, laser cutting, automotive, machinery manufacturing, metal construction, stainless steel processing and industrial subcontracting. Conclusion: The ARKU EdgeRacer ER 1500 D is especially attractive for professional sheet metal manufacturers looking to reduce manual labour, increase production capacity and achieve consistent, high-quality edge rounding on both sides of their components. Length:2300mm Gedpfe Aigigjx An Eoui Width:2600mm Height:2500mm Weight:4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 290 l, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 20 m³, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, seat heater, soot filter, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particulate filter - Radio/Multimedia system - Rotating beacon - Rear view camera - Seat heating - Sun visor - Lane keeping assist - Stability control - Windshield Internal number for inquiries: 6-099 Volvo FMX 500 8x4 BB dump truck – top-class model !!! "TECNOCAR Emil-Camion S4" NEW AT PAVIC -> Available in the following colors: Traffic white and Nardo grey (as shown in the advertisement) Vehicle data: Diesel engine, 12.8 l, 510 hp / 375 kW, 2,550 Nm Engine brake, exhaust pressure regulator (incl. engine control for I-Shift) I-Shift ATO2612, automated 12-speed gearbox (overdrive), max. input torque: 2,652 Nm Reinforced gearbox Compact retarder, gearbox-mounted (rear) with medium oil, braking power: 450 kW Gross vehicle weight, technically: 60 t (observe the drawbar load!) Wheelbase 4,350 mm Driver comfort package, selected Construction site package for FMX short cab Parabolic suspension front, 3-leaf (increased stiffness) Front axle load max. 18.0 t (technically) Rear axle load (technically) max. 32 t Drum brakes, cast iron material 290 l fuel tank, left, between double front axles AdBlue tank, usable capacity: 57 l, between the front axles Rear monitoring/camera Radio reception: AM/FM and DAB/DAB+ (analog & digital) Driver's seat comfort, air-suspended, seat belt in the seat LED headlights Roof antenna and preparation for CB radio Superstructure data: Dump truck in top quality from market leader EMILCAMION from Italy - 20 m³ - Steel construction made of HB 450, floor 8 mm, sides 6 mm - Hydraulic rear door - Lateral and rear reflective contour marking - Side marker lights LED - Stainless steel fenders - Stainless steel trim parts - Spare wheel holder - Stainless steel toolbox on the passenger side - Manually folding rear bumper - Electric tarpaulin, black - Two-tone paintwork (e.g.: NARDO GRAY AUDI LY7C, door frame and tailgate black) - Vibrator, electric, with wireless remote control - Protective grid for rear lights - Water tank - Folding ladder on the driver's side Price: FROM 164,990.00 € Net This is an un… General information Year of construction: 2026 Design year: 2026 Cab: Local traffic Technical information Number of cylinders: 6 Engine capacity: 12,800 cc Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65-22.5; Steered Front axle 2: Tire size: 385/65-22.5; Steered Rear axle 1: Tire size: 315/80-22.5; Differential lock Rear axle 2: Tire size: 315/80-22.5; Differential lock Weights Unladen weight: 15,500 kg Payload: 26,500 kg GVW: 42,000 kg Functional Brand of the superstructure: Tecnocar Emil Camion S4 Pump: Yes Tipper: Rear Gujdpfx Anez N Dtps Eei Condition General condition: very good Technical condition: very good Optical condition: very good Damage: none

Condition: used, Year of construction: 2013, functionality: fully functional, 4-AXIS CNC TURNING CENTER • Color: Light gray/anthracite RAL7035, 7016 • Main spindle 26 kW • Counter spindle AS 11 kW • Bar diameter 65 mm • Control system Fanuc 31i B-5 • Counter spindle can be lowered • 2 Y-axes *50/-40 mm, 4-way guided • X-axes with flat guide • 2 turrets with 12 tool stations each • 24 powered tool stations. Torque 47 Nm. • 2 C-axes • Bar loader interface • Controlled parts catcher, can be used for main and counter spindles • Finished parts conveyor belt, installed lengthwise, 500 mm long • Hinged belt chip conveyor with discharge height of 820 mm • 2 coolant pumps at 7 bar including filter • Foot switch for chuck operation on the main spindle • Internal flushing system with 4-bar pump • Flushing gun, 4 bar, for cleaning the work area • Intelligent handwheel Program execution with simultaneous movement of all axes MACHINE EQUIPMENT - Conveyor belt for machined parts Belt width/length 300x800 mm, Discharge on the operator side - Measuring probe, swiveling, with 2 heads for tool measurement Turret, top and bottom - High-pressure coolant pump, 18 bar for 2 turrets incl. coolant filter Pump capacity 20 l/min - MANUAL GUIDE i, dialog programming Turning/milling cycle, 3D simulation Manual (on CD) - SBS tool breakage and wear monitoring - Programmable axis mirroring Bar loader magazine Gjdpo Ah Scnjfx An Ejui Bar loader magazine FMB turbo 5-55 Bar length max. 3200 mm Oil lubrication for the bar Bars 5-55 / turned down to 50 mm Loading level 250 mm Guided by roller guide, can be changed to guide chuck (polygonal) Precise positioning during insertion Interval mode for polygonal material Residual piece ejection to the rear (max. 530 mm)

Condition: like new (used), Year of construction: 2016, operating hours: 10,517 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 500 kg, total height: 3,000 mm, total length: 4,900 mm, total width: 3,100 mm, table width: 500 mm, table length: 500 mm, overall weight: 13,970 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 26 W, Year of construction: 2016 CNC controller: Mitsubishi M-730UM Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 880 C-axis degrees: 360º (0,001) Feed rates m/min: 70 Rapid traverse m/min: 70 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: Ø800x1000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 37/26/22 Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 550 Max tool weight kg: 12 Tool-to-tool time s: 0.9 Chip-to-chip time s: 2.5 Equipment Chip conveyor Internal cooling lubricant supply Signal lamp Gsdpfx Aj Ai Dbrsn Eoui Tool breakage probe Laser tool measurement for measuring tool length and diameter Heat compensator Helical interpolation Fast fixed cycles Machine running times Spindle Working: 10517 Rated power kVA: 59 Basic machine dimensions / weight Length mm: 4900 Width mm: 3100 Height mm: 3000 Weight kg: 13970

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Godj Ad Iy Ispfx An Esui Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, WEISS TECHNIK Climate testing chamber / Temperature testing chamber / Climate chamber Weiss Umwelttechnik WK-180/70/5 Temperature range -70 °C to +180 °C Test chamber volume approx. 190 liters Water-cooled – Temperature and humidity testing system For sale is a used climate testing chamber from the manufacturer Weiss Umwelttechnik GmbH, model WK-180/70/5. The climate testing chamber was developed for carrying out temperature and climate tests. It is suitable for the testing of materials, components and electronic parts under different temperature and humidity conditions. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: WK-180/70/5 Type of equipment: Climate testing chamber / Temperature testing chamber Design: water-cooled Test chamber volume: approx. 190 liters Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate according to the manufacturer: Heating: approx. 7.5 K/min Cooling: approx. 7.5 K/min Climate data according to the manufacturer for the WK series: Climate temperature range: +10 °C to +95 °C Relative humidity: 10 % to 95 % r.h. Humidity control for climate tests The specifications for the temperature change rates and the climate range are the manufacturer's stated values. The actual performance depends on the operating Gjdpo Abbidsfx An Eeui and test conditions. Refrigerant circuit: Refrigerant 1: R404A Fill quantity: 2.50 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Fill quantity: 0.75 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Refrigerant and fill quantities according to the nameplate. An up-to-date leak test certificate is not included in the available documentation. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 21 A Test chamber: Test chamber volume: approx. 190 liters Internal dimensions (W × D × H): approx. 580 × 450 × 750 mm Test chamber with viewing window Metallic shelves / grid trays Test specimen feed-throughs Dimensions / Transport: External dimensions (W × D × H): approx. 870 × 1,285 × 1,775 mm Weight: approx. 460 kg Dimensions according to the manufacturer's drawing. Weight according to the manufacturer's specifications without options. Actual dimensions and weight may vary depending on the equipment. Equipment: Climate testing chamber with temperature and humidity control Water-cooled cooling system Electronic temperature control S!MCON / 32 control unit of the series External control panel Viewing window Test chamber lighting Metallic shelves Lateral test specimen feed-through Multi-stage refrigeration system Electrical power connection Industrial housing with adjustable feet Equipment according to the pictures Application areas: Temperature tests Climate tests Environmental simulation Material testing Electronics and component testing Aging and stress tests Quality assurance Research and development Product and component testing Workshop inspection from 15.10.2026: Measured temperature change Heating: approx. 9.7 K/min Measured temperature change Cooling: approx. 12.1 K/min Condition & Notes: Used Optical condition according to the pictures Scope of supply: 1 × Weiss Technik WK-180/70/5 climate testing chamber External control panel Existing shelves Existing connection components Otherwise, scope of supply as shown in the pictures. Collection or shipping by forwarding agent possible by arrangement. Loa

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 100 kg, grinding diameter: 300 mm, type of input current: three-phase, spindle speed (max.): 2,450 rpm, spindle speed (min.): 1,000 rpm, feed length X-axis: 260 mm, feed length Z-axis: 750 mm, grinding spindle motor power: 5,500 W, overall weight: 5,500 kg, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 12 m/min, input voltage: 400 V, CNC Cylindrical grinding machine JONES AND SHIPMAN Surprema 650 M EASY TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: GE FANUC Quick Panel Centre distance: 650 [mm] Max. grinding diameter: 300 [mm] Stroke X axis: 260 [mm] Max. Stroke speed X axis: 6000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 750 [mm] Guodpo Akcf Dofx An Eei Max. Stroke speed Z axis: 12000 [mm/min] Resolution Z axis: 0.0001 [mm] Min. grinding wheel speed: 1000 [rpm] Max. grinding wheel speed: 2450 [rpm] Grinding spindle motor power: 5.5 [kW] B axis swivelling stroke: 190° / 45 [°] B axis indexing precision: 0.02 [°] Internal workpiece spindle nose: Morse 5 Workpiece spindle max. speed: 660 [rpm] Workpiece swiveling range: 15 [°] / 90 [°] Workpiece spindle power: 1.2 [kW] Type of attachment tailstock: Morse 3 Tailstock quill stroke: 30 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: Ø +/- 0.05 [mm] Max. load between centers: 100 [Kg] Supply voltage: 400 [V] Weight: 5500 [Kg] More information upon request.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Deckel Maho DMU 80P Hidyn 5-axis machine Year of manufacture: 2003 Control system: - Heidenhain MillPlus iT Travel ranges: - X- 800, Y-700, Z-600 Main spindle: - SK 40 DIN 69871 - Spindle speed max. 12,000 rpm Gsdpfx Ao Akffasn Esui Measuring system: - Tool breakage control - 3D measuring probe Heidenhain TS642 Tool changer: - 60 magazine positions Work table: - NC rotary table 360° Swivel head: - NC swivel head B-axis Internal cooling: - Band filter system 40 bar (600L) Machine hours: - Machine on 34,662 - Spindle on 9,686 Availability: - Immediate Special features: - Machine is ready for immediate use. - Machine is available for short-term delivery. - Machine can be inspected and tested on-site under power. - Machine will be loaded onto a truck free of charge. - Forklift for loading is available. - Transport can be arranged upon request.

Condition: used, Thermo Scientific Type: Herasafe 2030i 1.5 Gedpfx Anjzd Udpe Esui Safety Workstation The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design, incorporating groundbreaking innovations to optimize contamination prevention, user-friendliness, and information management, and delivers the most technologically advanced Class II cabinets on the market. Equipped with "intelligent" safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity for maintaining critical performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks that require a high level of safety for product, personnel, and the environment. Suitable for working with BSL 1, 2, and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, electrically operated window, segmented work surface in 30 cm sections, and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option of a Thermo manually adjustable base, 1.5 m. Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) internal: 627 x 1500 x 780 mm 230 V, 9 A, 2010 W Condition: used / like new (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Thermotron Type: SM-8-8200 Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65°C to 71°C: 17 Heating time in minutes -65°C to 180°C: 43 Heating time in minutes -40°C to 85°C: 16 Electrical requirements in full-load amps 230/3/60: 19 Electrical requirements in full-load amps 230/1/60: 25 Electrical requirements in full-load amps 220/1/50: 27 Cooling time in minutes 85°C to -40°C: 32 Cooling time in minutes 71°C to -65°C: 54 Cooling time in minutes 180°C to -65°C: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Condition: used Scope of delivery: (See image) Godpfx Anezd Snrj Eoui (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.