Used Jointer for sale (256)

Condition: used, Technical data: Dodpfxjyctqyj Afnsun Max planing width: 500 mm Max planing height: 200 mm Cutter shaft diameter: 110 mm Number of knives: 3 1 feed roller in the table 2 feed speeds Manual lifting Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 620 mm Width: 1200 mm Height: 1300 mm

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Dujdpep R Iwhjfx Afnjn

Condition: used, Technical data: Max. planing width: 330 mm Cutterhead diameter: 110 mm Number of knives: 4 Total table length: 2410 mm Table height adjustment Tilting fence Safety switch Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2410 mm Width: 750 mm Height: 1050 mm Djdeybn R Sepfx Afnjun

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Duodpfx Aeyabltefnen

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm - Shaft with 4 knives - 2 table rollers Duedpoya Drvefx Afnsn - Motor with brake Machine in very good, excellent condition.

Condition: good (used), Year of construction: 1995, functionality: fully functional, planing width: 520 mm, number of planer blades: 4, height adjustment type: electric, Equipment: motor brake, Description Dusdpfx Aox Aibasfnen SCM FS 520 – Jointer & Thickness Planer Combination Machine | Year of Manufacture: 1995 | Good Condition For sale is a robust and precise combination machine from SCM: SCM FS 520, year 1995, ideal for professional workshops and ambitious joiners/cabinet makers. The machine has been regularly serviced and is in good technical condition. Technical Data & Features: + Manufacturer / Model: SCM FS 520 + Machine Type: Combined jointer & thickness planer + Year of Manufacture: 1995 + Motor Power: 5.5 kW (three-phase) + Cutterhead: Centrofix system (quick knife change, precise cut) + Number of knives: 4 Centrofix knives + Planing width: 520 mm + Thicknessing width: 520 mm + Max. planing depth: approx. 5 mm + Thicknessing height: 3 – 250 mm + Feed speed: 6–12 m/min (2-speed) + Jointer table length: approx. 2200 mm (infeed & outfeed table) + Pneumatic table lift: Yes – facilitates switching between jointing & thicknessing + Electric height adjustment of thickness table with digital readout + Weight: approx. 1000 kg + Extraction port: 120 mm + Voltage: 400 V Condition & Maintenance: + New compressed air unit/control + Machine from a well-maintained workshop + Centrofix knives in good condition + Tables flat, bearings run smoothly + Immediately ready for use + No known repairs required You will receive an invoice with VAT shown. Shipping via carrier possible by arrangement. Price: €7800 net ex stock Haldensleben.

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Dodpfxou R Szto Afneun Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, Dodpou R Sz Tefx Afneun table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Duodpfxeu R S Awe Afnon Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: good (used), Year of construction: 1995, functionality: fully functional, For sale: HUNDEGGER HM-3 planer. Suitable for machining beams from 15*30 mm up to 300*400 mm. Cutting depth: 10-12 mm. Compatible with HUNDEGGER CNC machines (p10, Speed-Cut). Well-maintained, kept in a workshop. For sale due to underutilization. We can assist with transportation. Please contact us with any questions. Duedpfex Tu Dqex Afnjn

Condition: good (used), Year of construction: 1995, functionality: fully functional, WORKING DIMENSIONS: 400x250 mm 4 SIDES + EDGE BEVELERS Dujdpfx Aox S E Hasfnen

Condition: used, Year of construction: 2014, functionality: fully functional, planing width: 410 mm, planer shaft diameter: 72 mm, total length of planing tables: 1,800 mm, number of planer blades: 3, type of input current: three-phase, overall weight: 355 kg, input voltage: 400 V, rotational speed (max.): 6,000 rpm, - Year of manufacture: 2014 - Not repainted - After technical inspection - Operating manual, technical documentation (DTR) TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Cutterblock diameter: 72 mm SURFACE PLANER: - Planing width: 410 mm - Max depth of cut: 4 mm - Jointer table length: 1800 mm - Fence length: 150 x 1100 mm THICKNESSER: - Planing width: 404 mm - Table length: 600 mm - Planing height min/max: 4/225 mm - Feed speed: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V - Extraction port diameter: 100 mm Duedpfx Aew H R I Ssfnen Machine overall dimensions: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 120 mm, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Duodpfx Afexw U Nxonsn Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Maximum speed: 18,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 4 kW Saw spindle: bottom EQUIPMENT CE marking

Condition: reconditioned (used), functionality: fully functional, Planing width 510 mm, planing height 200 mm, manual height adjustment, star-delta switch, feed controlled by 2-speed foot pedal, main switch, emergency stop. Djdpfx Aex E Smmjfnsun

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, planer shaft diameter: 120 mm, total length of planing tables: 2,250 mm, chip removal for surfacing (max.): 5 mm, chip removal: 5 mm, planing height: 240 mm, number of planer blades: 4, type of input current: three-phase, overall weight: 695 kg, input frequency: 50 Hz, Equipment: motor brake, Holzkraft surfacer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Surfacing table length 2,250 mm, 4-knife TERSA cutterblock, Motor 7 kW (9.5 HP); S6 5 meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously foldable tables, combined extraction hood for surfacer and thicknesser D = 120 mm, Thickness table adjustment via handwheel with integrated readout, star-delta switch, auxiliary fence, CE and BG - wood dust certified. Dodpoxn Suaefx Afnoun Order no.: 5503501 Available immediately ex location Seevetal, without transport, subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, TERSA cutterhead with 4 knives, 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit. Thickness table adjustment with buttons for rapid or slow feed, as well as fine adjustment accurate to 1/10 mm. Integrated operating hours counter. Thickness table mounted on 4 support spindles and 4-way guided. Two feed speeds: 7 and 14 m/min. One rubber feed-in and one rubber feed-out roller. Two extraction ports Ø 160 mm. Slide for top extraction. Planer guard system SUVAMATIC. Motor power 7.5 kW. Positioning control including sensor monitoring. Dodpfx Afox Ey Tzjnsun

Condition: excellent (used), Robland SD-B 510 thickness planer, planer and drilling machine - Electric lift - Planing height: 25 cm - Planing table length: 2250 mm - 4 standard knives - 4 feed speeds, controllable by switch - Sound dampening comb Djdpfxsx Ha Eao Afnjun - Thickness planing table without rollers, on 4 supports - Horizontal boring machine with eccentric clamping device - Weight: 1300 kg The machine is in very good condition, looks like new, not repainted.

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Record Power PT310 Planer Thicknesser with a planing width of 310 mm. The machine is in its original condition and comes with full warranty. Technical specifications: Duodpfx Aoviu S Usfnsn - Motor power: 3 HP / 230 V connection - Planer table length: 1,407 mm - Planing width: 310 mm - Cutter block diameter: 70 mm - Cutter block equipped with 3 knives - Maximum cutting depth: 3 mm - Feed speed: 7 m/min - Weight: 202 kg Shipping by freight: Austria: €80.00 incl. VAT Germany: €100.00 incl. VAT South Tyrol: €120.00 incl. VAT The planer is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: surface planer, thicknesser, planer, surfacing, thicknessing Reference: ZXPT310-A

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 530 mm, Houfek Planer-thicknesser SC 530 Standard configuration: Motor 5.5 kW (7.5 HP) Total length of planer tables SC 530 – 2,350 mm Simultaneously tilting planer tables Guide fence dimensions 1,300 × 150 mm Fence tilting angle 0°–45° Thicknesser table length – 1,000 mm Manual height adjustment of thicknesser table Duodpfxjwvaqzj Afnen Mechanical numeric measurement of table position 4-point mounting of thicknesser table Split inlet pressure segments Grooved infeed roller Outfeed roller Min./max. workpiece thickness 3 – 250 mm 4-knife cutterblock D=120 mm Automatic star/delta motor start Feed speeds 6/12 m/min Electromagnetic brake Voltage 400V/50Hz Standard packaging in PE film Machine built according to CE electrical and safety standards Additional equipment (installed on this machine): Motor 7.5 kW (10 HP) for SC 530 Split grooved feed roller Tilting cover for cutterblock Tiltable auxiliary fence Motorised thicknesser table lift with two-speed motor Electronic position measurement of thicknesser table with digital display Cutterblock type "Tersa" for SC 530 mm Planed planer table Planed thicknesser table

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: - Total table length: 3008 mm - Planer fence made of cast iron - Control panel above the table - Motorized adjustment of the infeed table - Electronic digital display of chip removal - Cutterhead safety guard Technical data: L'invincibile f 7 Working width: 520 mm Cutterhead diameter: 120 mm / 4 knives Total table length: 3008 mm Main motor power: 7 (8) kW / 50 (60) Hz Advantages: Table adjustment via parallelogram: Dodpfx Afew Tfynjnoun Permanent precision. Safe operation with infeed table adjustment via parallelogram mechanism ensures a constant distance between the table and the cutterhead. The system operates directly via the joints, preventing stress on the table for lasting stability and parallelism. Concave/convex functions – ensure perfect edge gluing. The available adjustments allow for perfect edge joints with optimal bonding and invisible connection lines. Integrated 'Smart Lifter' guard – ergonomics and safety. The patented protection system by SCM is fully integrated into the machine base to maximize protection while preventing interference or inconvenience during operation. Through automatic vertical, horizontal, and angled movements, this guard guarantees complete coverage of the tool before, during, and after machining. "XYLENT" spiral cutterhead. The 3-row knife configuration ensures an excellent finish. The Xylent spiral cutterhead allows for quieter operation and improved extraction thanks to finer chips. Extended service life due to the possibility of rotating the knives 4 times. Availability: short-term Location: Flörsheim am Main

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts - Year of manufacture 2024 Duodpfx Afsv Scx Usnsn - Machine number 52.02.285.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm Dusdpfew Hckrox Afnjn - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Dsdpfx Afew Hcygsnsun Reference: R-A0117

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Dsdpfx Aswrcd Nofnoun Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Planer part (planing function) Working width: approx. 500–520 mm Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: new, Year of construction: 2023, Basic equipment Diameter planing shaft 70mm, 3 knives of 410 mm Anodized planing fence 90°- 45° Total length 1800 mm Dressing fence 1500 x 150 mm Maximum chip removal 4 mm Passage thick planer 410 mm x 230 mm weight: 325 kg Dsdpfxsmft Nke Afneun incl. special accessories: TERSA cutter block