6400x1,5 mm, 2,5 mm aluminium, backgauge 1250 mm
Projection: 1250 mm
Total power consumption: 16 A
machine weight: 5800 kg
with roller shears
Number of stands: 6 pieces
Opening width: 200 mm
with the following equipment
- Control unit CP 200 (LP 25.220 €)
- Stop system type 14 conical (LP 9.560 €)
- 5 stop fingers standard (LP 5x 750 €)
- Roller shears SL 1,5mm (LP 9.650 €)
- Material thickness adjustment type RH per stand (LP 6 x 760 €)
- dynamic positioning type DP (LP ... more
Maximum plate thickness (Normal steel): 2.5 mm
Minimum sheet thickness: 0.4 mm
Maximum weight of sheet exchanger: 11.000 kg
Maximum outer diameter of sheet coil: 1.600 mm
Maximum inner diameter of sheet exchanger: 700 mm
Coil width minimum: 50 mm
Maximum belt width in coil: 1.250 mm
Minimum sheet length: 350 mm
Maximum feed: 20 m / min more
Jorns folding machine Norma Line - 100 - SM - CNC400 - 6 x 1,25, fabrication number: 9931-03. The machine is immediately available and can be picked up. The machine bends sheets up to 1,25 mm fully hydraulic and CNC controlled. Blanks are cut with the automatic cable-guided roller shear. The machine is in a good condition and has been stored permanently in a dry hall. Here the technical data of the machine:
- Bending length 6.00 m, fully hydraulic
- Maximum bending capacity Steel 1.25 mm, stainl... more
10,000x3.0, 4.0 mm aluminium, 2.0 mm VA, with CP 200 control, with motor stop, large motor shears SL 3 (up to 3.0 sheet steel/4.0 aluminium), hydr. driven, with dynamic, automatic crowning device programmable via control, per upright unit for upper beam, hydr. radius adjustment/upper beam adjustment,
- Super-High-Speed Speed
- 28 coupling joints, 14 clamping cylinders, 28 bending cylinders on base frame
mounted - with motor stop type 11/20 - 1000 mm
- with 7 automat... more
Production year: 2013
Producer: JORNS AG
Power supply: 3x400V / 50Hz
Control voltage: 24 VDC
Maximum hydraulic pressure: 110 bar
Weight: ~ 4500 kg
Number of machine arms: 5 pcs
Bending beam cylinders: 3 pcs.
Rear type 11 manual measuring table with range up to 1000 mm with bumper fingers
Maximum bending length: 6400 mm
Maximum thickness of bent sheet:
Normal steel (Rm = 400 N / mm²): 1.5
Aluminum (Rm = 220 N / mm²): 2.5
Stainless steel (Rm = 600 N / mm²): 1
Overall dimen... more
6020x1,25 mm, 2,0 mm Alu, 0,80 mm VA, with CNC 400 control (NC table control), mounted at the swivel bracket, with motorized roller shears, with water fold groove, with foot switch, without back stop, colour: blue, total power consumption: 16 A, insertion depth: 1000 mm, with roller shears, number of uprights: 5, opening width: 200 mm, bending angle: 145 degrees
- laser-hardened tools
- dynamic positioning system of the upper beam/pressing to size
- Fully automatic, hydraulic sheet thickness adjustment
- automatic infeed tables for optimal material handling
- LED lighting in the machine
- Electrical clamping fingers with conical bending device
- 3-fold split clamping system
- Short part clamping fingers conical/electric
- Vacuum gripper system for edged sheets
- Scissors type SE up to 1,5mm
- Super-fast double-servo hydraulic pump
subject to t... more
Backgauge CNC controlled
insertion depth: 1000 mm
Upper beam stroke: 200 mm
Roller shears: SM 3
Number of stands: 6
with large roller shears SM-3 up to 3,0 mm
with CNC touch control 500
with upper beam pretensioning for dimensionally accurate folded parts
with hydraulic radius adjustment for air gap adjustment
Space requirement: approx. 7500 x 1800 mm
Weight: approx. 7300 kg
Machine is repaired, checked, cleaned and is then fully functional. Test run is carried out. more
6020x1.0 mm, 1.5 mm, 0.6 mm, with motor scissors, emergency stop rail, foot switch, 1-fold bending angle presetting machine is repaired, tested, cleaned by a specialist and is then fully functional. Test run is carried out.without backgauge Insertion depth: 1000 mmColour: blueTotal power requirement: 16 Space requirement: 6800 x 1600 x 1700 mm Machine weight: 2600 kgBending angle: 145 degreesWith roller shears Number of stands: 4 Opening width: 200 mm
9999x1.0 mm, 1.5 mm aluminium, 0.6 mm VA, with emergency rail, with insert plates
Motor scissors, foot pedal, 8-fold bending angle preselection
age-related wear, hydraulics and cylinders may be with leaks, perhaps storage in need of repair, control digital display failed, machine for self-repair and for occasional use. Perhaps one or the other bend angle preselection no longer to use. Machine is not overhauled and tested by us and is handed over to "Bastler" at this price. Bending cheek h... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.