Used Juice for sale (224)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, Fgedpfx Ajzg Dlbepvsh 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Year of construction: 2026, condition: new, Specifications: - Power: 500 L / h (when heated from 20 ° C to 80 ° C) - Electricity requirement: 48 kW, 400 V - Material quality: WNr. 1.4301, AISI 304 Stainless steel - Size: 750x1950x1170mm - Weight: 350 kg (without fuel) - Heating medium: water (soft) Fgsdpfofdz Dkex Apveh - IP65 certified electronics - Connectors: DN25 Hollander - with level indicator Temperature control is done at 2 points in the heating medium and once at the outlet of the product. The machine automatically controls the heating medium temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired temperature, the output side of the machine is disabled and the juice circulates in the by-pass system until the temperature reaches the set level. The machine then starts charging again. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Accessories: • 18 pieces of press cloths • 20 pieces of press grate Fsdpfxotz Spke Apvsgh Technical Information • Output: 1000 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: • 1,000×1,680×2,720 mm • Weight: 720 kg • IP65 electronic switch boxes • High yield up to 60–80%

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Fodpfx Ajtz Sp Dopvsgh Accessories: • 18 pieces of press cloths • 20 pieces of press grate Technical Information • Output: 600 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: • 1,250×1,370×1,520 mm • Weight: 450 kg • IP65 electronic switch boxes • High yield up to 60–80%

Condition: new, functionality: fully functional, - this machine is also available with 6-positions filler capacity (10l bags) 750 l/h electric outlet 230V 50Hz (single phase) fuse 13 A dimensions: length 1 280 mm width 790 mm Fgsdpfx Asu Nk Tljpvsh height 1 075 mm weight 85 kg material 1.4301 / AISI 304 filling accuracy ± 0,5 % compressed air connection 6 bar juice supply connection Ø 19 mm juice supply tank 54 l suitable for: hot filling of fruit and vegetable juices into 3, 5, 10 and 20 l bags scope of delivery cleaning adapter unit

Condition: new, machine/vehicle number: 190027001, Roller sorting table 2500 x 800 mm This device was designed for sorting a wide variety of fruit and fruits and vegetables. The rotating movement of the rollers during transportation of the goods, an apple, for example, can be inspected from every side to detect damaged areas. A light bar mounted above the rollers illuminates the working area. This allows the defective fruit to be immediately removed from the process. This is essential to achieve a high juice quality. Design of the appliance: The rotating plastic rollers are enclosed in a stainless steel housing, which is mounted on a height-adjustable frame with wheels. The appliance can be operated either manually or ideally with the VORAN large crate emptying system (GKE). Standard equipment: - Light bar - Adjustable speed - Height and angle adjustable Fjdjtvfc Hepfx Apvogh - mobile Technical data: Processing capacity up to 3 000 kg/h Conveying speed 0.05-0.3 m/s Working height ~1000 mm Discharge width 500 mm Dispensing height ~800 mm Electrical connection 230V 50Hz (1-phase) Electrical power 0.55 kW Plug type F (=SCHUKO) Dimensions: Length 2 840 mm Width 1 080 mm Height (incl. light bar) 1 800 mm Weight 200 kg

Condition: new, Year of construction: 2025, Kreuzmayr PA 500 pasteurizer for fruit juices, with pipe in pipe heat exchangers, including oil-fired boiler, Fodpfx Aeb Ilnyspvjgh temperature control, juice pump, mounted on stainless-steel chassis throughput: 500 l/h from 10°C to 80°C

Year of construction: 2026, condition: new, This machine is an electric pasteurizer which suitable for filling of bottles and bag-in-boxes. - 100% stainless steel materials - optionally with a bottle or a bag-in-box filling with digital scale Specifications: Fodpfx Aofdz A Depvsgh - Performance: 180 L/h (From 20°C to 80°C) - Electric demands: 18 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 600x1000x1750 mm - Weight: 85 kg IP65 certified electronics Heat exchanger: soft water Connections: DN 25 Level indicators for water and juice Thermometers: 2 pcs Automatic heat control, very easy to clean. Manual, gravitational type. With 4pcs wheels. It requires minimal maintenance. Accessories: manual BiB filler with digital scale OR two head bottle filler module Available options: - BiB AND bottle filler modules - Stainless steel juice pump for refilling the upper tank

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 500 kg of apples per hour Fgodsfgl Hfepfx Apvjh Juice yield from pressed apples: up to 75% Installed power: 0.8 kW, 230 V Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Fb001, warranty duration: 12 months, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, type of input current: three-phase, overall weight: 100 kg, power of the servo motor: 1 W, film width: 38 mm, compressed air connection: 0.25 bar, input voltage: 220 V, nominal power: 0.5 kW (0.68 HP), heating capacity: 0.8 kW (1.09 HP), Equipment: CE marking, Performance and features: 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. Fgodexmwkqopfx Apvsh 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product. 6) Can add nitrogen function according to clients requirement. Application: It can be widely used in bag-in-box filling applications for such liquid materials as wine, edible oil, fruit juice, additives, milk, syrup, alcoholic beverages and concentrated seasonings.suitable for all kinds of bags and caps.

Year of construction: 2026, condition: new, Specifications: - Performance: 1400 kg/h - Electric demands: 3 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 2500x1330x1230 mm - Input height: 1250 mm - Output height: 370 mm - Weight: 1150 kg - IP65 certified electronics - Food industrial, massive polyester belt - Belt: 2mm thick, density: 6x16 filament/cm^2, ½ rate (suitable for large fiber-free juice) - High yield: 75% - depends on the freshness and quality of the fruits - High-pressure washer demand: 500 L/h - Compressed air demand: 50 L/h 6 bar - Built-in inverter: steplessly adjustable belt speed Fgodpfx Apsd Aqznsvoh Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean. With 4pcs vibration-free feet. It requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Condition: new, Specifications: capacity up to 600 kg/h power: drive motor 0,75 (1,02) kW (PS) brush cleaning 0,37 (0,5) kW (PS) high pressure cleaner 4,7 (6,4) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 825 mm width 1 085 mm height 1 290 mm insertion resp. discharge height 1 290 mm belt width 420 mm spread width 300 mm spread height 10 - 50 mm weight (belt press) 550 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuously) 2,1 - 5,5 m/min lead time 0,4 - 1 min Fgodpfx Aod Nrakopvjh water connection min. G ½ “, min. 12 l/min juice discharge height 305 mm pomace discharge height 780 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Condition: new, capacity: up to 7 000 kg/h electric outlet: 3kW 400V 50Hz (3 phases) Fsdpfx Apedix N Hjvegh fuse: 16 A dimensions: length: 4 435 mm width: 2 250 mm height: 2 160 mm insertion resp. discharge height: 1 430 mm belt width: 1 100 mm spread width: 320 - 870 mm spread height (infinitely adjustable setting): 10 - 50 mm weight: 3 400 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,5 - 6 min water consumption for cleaning: 20 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 40 juice discharge height: 200 mm sewage discharge height: 100 mm pomace discharge height: 800 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Year of construction: 2026, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Fedpjv Sq Rxofx Apvogh Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining

Condition: new, capacity: up to 1 000 kg/h power: drive Motor: 0,75 kW brush cleaning: 0,37 kW high-pressure cleaner: 4,7 kW electric outlet: 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 2 145 mm width: 1 270 mm height: 1 290 mm insertion resp. discharge height: 1 290 mm belt width: 580 mm spread width: 240 -460 mm spread height (9 stages): 10 - 50 mm Fgodedix Icjpfx Apvsh weight: 665 kg material: 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuous): 2,1 - 5,5 m/min lead time: 0,6 - 1,6 min water consumption for cleaning: 3 l/min connections: sewage Connection: DN75 juice discharge Connection: 1 ½ “ juice discharge height: 305 mm sewage discharge height : 86 mm pomace discharge height: 745 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: new, capacity: up to 3 000 kg/h electric outlet: 3,5kW 400V 50Hz (3 phases) fuse 16 A dimensions: length: 3 720 mm width: 1 730 mm height: 2 110 mm insertion resp. discharge height: 1 430 mm belt width: 660 mm spread width: 220 - 440 mm Fsdpfx Apodix I Uovogh spread height (infinitely adjustable setting): 10 - 40 mm weight: 2 200 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,4 – 4,2 min water consumption for cleaning: 10 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 25 juice discharge height: 130 mm sewage discharge height: 50 mm pomace discharge height: 810 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: new, Nominal capacity: 400 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx.: 35 kW Electrical Rating: 1.4 kW Electrical Connection: 230V 50Hz (1 phase) Electrical protection: 16 A Dimensions: Length: 910 mm Fgjdodix Rcspfx Apvsh Width: 960 mm Height: 1 850 mm Weight (heating circuit drained): 260 kg Weight (heating circuit filled): 360 kg Heating oil consumption approx.: 3,5 litres/h Max. exhaust temperature: 180°C Noise level (LW, A): 83 dB Flue gas connection: ø 150mm

Condition: new, dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: Fedpfjb Nt N Isx Apvegh two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25

Condition: new, - this machine is also available with 6-positions filler capacity (10l bags) 750 l/h electric outlet 230V 50Hz (single phase) fuse 13 A dimensions: length 1 280 mm width 870 mm height 1 075 mm weight 85 kg Fgodsb Nuwgjpfx Apveh material 1.4301 / AISI 304 filling accuracy ± 0,5 % compressed air connection 6 bar juice supply connection Ø 19 mm juice supply tank 54 l suitable for: hot filling of fruit and vegetable juices into 3, 5, 10 and 20 l bags scope of delivery cleaning adapter unit

Condition: new, capacity up to 3 000 kg/h power: drive motor 2,2 (3,0) kW (PS) washing machine motor 0,37 (0,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 3 035 mm width 2 085 mm height 1 690 mm insertion resp. discharge height 1 690 mm belt width 1 200 mm belt length 9 950 mm spread width 900 mm spread height (5 stages) 0 - 65 mm weight 2 500 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed 0,5 - 3,5 m/min contact time 2 - 11 min Fedpfx Asb Nt Irspvogh water consumption for cleaning 6 l/min connections: sewage connection Ø 76,1 mm juice discharge connection 1 “ juice discharge height 400 mm sewage discharge height 246 mm pomace discharge height 880 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Condition: new, The pasteurizer is available with bottle filler oder Bag-in-Box filler capacity 180 l/h electric power 18 kW electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: Fgsdpfx Aob Nt Tkjpvjh width 600 mm height 1 650 mm weight 49 kg material 1.4301 / AISI 304 water supply tank 100 l juice supply tank 65 l suitable for fruit and vegetable juices scope of delivery 2 bottle filling valves

Condition: new, Year of construction: 2025, Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the automatic lid capping machine. The positioning and closing of the lids are fully automatic. - Specifications: filling range: 30-3000ml; number of filling heads: 2; max. speed of the machine in neutral: 50 cycles/minute; SUS304, product contact parts from SUS3316; dimensions and weight of the packaging system depending on the final layout. Fedjv Nk R Hopfx Apvogh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2026, condition: new, The PT-1200 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 4000 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 3.4 kW, 230 V Dimensions L × W × H (mm): 3100 x 2190 x 1650 Weight: 2000 kg Belt width: 1200 mm Belt speed: adjustable Juice collection tray with sieve Fgedpfeukq T Hsx Apvsh Juice pump

Condition: new, Specifications: capacity up to 300 kg/h power: drive motor 0,37 (0,5) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 280 mm width 870 mm height 1 350 mm insertion resp. discharge height 1 265 mm belt width 350 mm belt length 4 900 mm spread width 240 mm spread height (infinitely adjustable setting) 0 - 50 mm weight 350 kg material 1.4301 / AISI 304 juice yield bis zu 75 % belt speed 2 m/min contact time 1 min water consumption for cleaning 2 l/min connections: Fgedpfx Apob Nc Shsvjh sewage connection Ø 48,3 mm juice discharge connection 1 “ juice discharge height 420 mm sewage discharge height 120 mm pomace discharge height 700 mm suitable for pomaceous and stone fruit

Condition: new, capacity 90 l/h electric power 6 kW Fgsdpfx Apob Nt S Tovjh electric outlet 400V 50Hz (3 phases) fuse 16 A weight 10 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices