Used Just Feed for sale (12,447)

Condition: used, machine/vehicle number: 006585, Max. panel width: 2700 mm Nwodsuxg Udjpfx Ag Isc Max. panel length: 1200 mm Max. panel stack height from the ground: 1300 mm Lifting capacity: 50 Kg Movement system: suction cups.

Condition: used, machine/vehicle number: 005934, Max. panel width: 2200 mm Max. panel length: 4200 mm Max. panel stack height from the ground: 1000 mm Lifting capacity: 200 Kg Nwsdpfx Aswcydbjg Isc Movement system: suction cups.

Condition: used, machine/vehicle number: 007965, Max. panel width: 1300 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 200 Kg Nwsdow Ic Ryspfx Ag Iec Work capacity: 8 Cycles/min Movement system: suction cups.

Condition: used, machine/vehicle number: 005685, Max. panel width: 1200 mm Max. panel length: 3200 mm Nsdsyg Ec Nspfx Ag Ijwc Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Movement system: suction cups.

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press Nodjitdikspfx Ag Iswc -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: used, empty load weight: 7,540 kg, maximum load weight: 31,460 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2011, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: white, Year of construction: 2011, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference Number for Inquiries: 40612 Feldbinder, EUT 55.3 * Year of Manufacture: 2011 * ABS (Anti-lock Braking System) * Alloy wheels * Air suspension * Steering axle * Air coupling head (red + yellow) * 15-pin connector plug * Lift and lowering device * Storage box/toolbox * Hose compartment left and right * Floor discharge outlet * Folding ladder and railing Nwedpfeyicwgsx Ag Ioc * Baffle plate * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,540 kg * Payload: 31,460 kg * Permitted gross weight: 39,000 kg * Axle manufacturer: Daimler * Tyre condition 1st axle: 40% -- 40% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 30% -- 30% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 20% -- 20% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Manufacturer: Heitling * Capacity: 54 m³ * Tridec steering system Disclaimer: Subject to alterations, prior sale, and errors. More photos and videos available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Processing of all (export) documentation * Ordering of export/customs license plates * Vehicle preparation: new tarpaulins, decals, paintwork, etc. * Professional loading and load securing * TÜV approvals, registration service * Transfer of commercial vehicles Consult our qualified staff – we are happy to advise you.

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Grinding wheel width: 500 Grinding wheel diameter: 610 CNC: 5 axis (new) Nwjdpfx Agsgmf Rne Iec

Condition: excellent (used), functionality: fully functional, Steel Feed Hopper Consists of: - Main structure: overall dimensions: 3600 x 3600 x 2800 mm working width: 1200 mm - Roller system: roller length: 1600 mm - Conveyor: equipped with an inclined belt conveyor Nwsdpfx Agoykmkvo Isc The steel feed hopper is a robust unit designed for buffering and controlled feeding of raw material in industrial process lines. With its large capacity and 1200 mm working width, the hopper ensures smooth production flow, eliminating downtime caused by uneven material supply. The integrated inclined belt conveyor enables efficient material transfer to subsequent processing stages, while the 1600 mm roller system supports precise guidance of the product stream.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Nsdpfxexnpx Ne Ag Iewc

Condition: new, Year of construction: 2021, machine/vehicle number: 0-250-87-1000, functionality: fully functional, Equipment: CE marking, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Standard features •Drilling head with 13 spindles •Horizontal drilling head with 4 spindles in X-direction •Horizontal drilling head with 2 spindles in Y-direction •Grooving saw D=100 mm (X-direction) •Stop cylinder for workpiece positioning •Workpiece clamping system Njdsw U Ty Sepfx Ag Iowc •Workpiece length: 3050 mm •Workpiece thickness: 12-60 mm Machine operation •WOODWOP 7 FOR MACHINE •Milling motor with frequency inverter 5kW (ETP) Documentation •Selected language: Polish, English, German •Documentation on data carrier, paper documentation General information •Year of manufacture: 2021 •Control: POWERCONTROL with POWERTOUCH system •CE-marked •Status: Ready for operation / can be demonstrated •Available in stock

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Centre height: 185 mm Spindle bore: 40 mm Spindle flange: KK5 (DIN 55022) Spindle taper: MT5 Speed range: 20 – 1,600 rpm Digital readout: Heidenhain VRZ 773 B on 2 axes (scales on compound and longitudinal slides) Dimensions: 1,900 x 900 x 1,700 mm Nedpfxjw Svtco Ag Iswc Features: - Spindle brake with foot pedal - Adjustable stop on compound slide (disengages feed) - Splash guard Accessories: - Operating manual - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Röhm 3-jaw chuck 200 mm with hard and soft jaws Weight: approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is supplied without guarantee. Subject to errors and prior sale; all dimensions are approximate. Offer is non-binding. The machine can be inspected by appointment. Specifications, information and prices are subject to change and prior sale! All prices are net plus VAT. Payment in advance within 14 days of contract conclusion, including any applicable freight costs. In case of incomplete payment within this period, the seller reserves the right to cancel the purchase contract. Sale is only to businesses as defined by § 14 BGB. The machine is sold excluding liability for material defects. This exclusion does not apply to claims for damages based on grossly negligent or intentional breach of obligations by the seller or his agents, or in case of injury to life, body, or health. Any remaining claims against third parties for material defects will be assigned to the buyer. Please understand that compliance with any applicable safety regulations for the sold machine and its components is the responsibility of the end user. No liability is assumed by us for such compliance. German law exclusively applies to all our contracts, to the exclusion of the United Nations Convention on Contracts for the International Sale of Goods (CISG). Place of jurisdiction is agreed to be Mannheim.

Year of construction: 2000, condition: used, machine/vehicle number: 000101-6, stainless vibratory feed conveyors, adjustable vibration for product control, on stainless frame. 1Ph. Nsdsdg H Ipspfx Ag Iewc

Condition: excellent (used), Feed table for a four-sided planer TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm max. element thickness 120 mm roller motor power 1.1 kW 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains Nwsdohtq Amjpfx Ag Ioc 13 steel feed rollers roll diameter 90 mm height of the rollers from the base 820 mm pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm weight ~ 1500 kg

Condition: ready for operation (used), Year of construction: 2012, Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible. Nodpouantujfx Ag Iewc

Year of construction: 2003, condition: ready for operation (used), Number of pallets: 15, max. sheet format: 3000x1500mm, length: 9830mm, height: 6155mm, weight: 12t. Nwjdpfxehvvmis Ag Isc

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Nwjdpfx Agsi El Uco Ijc

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² Nodpelil Ewsfx Ag Iswc reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t Nwjdpfx Agsbicz Hj Ioc coil-dia max. 1.500 mm

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production Njdpfxofwl Uaj Ag Iswc TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: used, Year of construction: 2015, height adjustment type: mechanical, - Year of manufacture: 2015 - Single owner. EQUIPMENT: Electrical Equipment - Supply voltage: 3x 400 V Njdpsya Ethefx Ag Iewc - Supply frequency: 50 Hz Workpiece Dimensions - Edgeband thickness: 0.4 - 3.0 mm - Workpiece thickness: 10 - 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units - Edgeband feeding from a reel via a feed plate - Edgeband feeding thickness from 0.4–3 mm, manual feeding of single strips - Guillotine shears for trimming edgeband from the reel up to 3 mm thickness - Gluing unit for granulated hot-melt adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing/fixing roller - Saw trimming unit, 9,000 rpm, 0.18 kW, HW saw blades Z= 16, Ø 80 mm - Multifunctional milling unit, 12,000 rpm, 0.22 kW, radius machining, straight milling, chamfering - Radius scraper unit, mechanically engaged, for R= 2 mm - Flat scraper unit, mechanically engaged Operation: - Control panel with LCD display and keyboard - Quick, tool-free unit adjustment system (Quick system) Feed: - Edged workpiece transport by chain with track - Feed speed: 8 m/min - Extendable support General data: - Extraction connection Ø 120 mm Overall dimensions: - Length: 2000 mm - Width: 800 mm - Height: 1500 mm - Weight: 360 kg On customer request: - The machine is suitable for processing PVC and ABS edgebanding 0.5 - 3 mm - Edgebanding speed approx. 7 m/min - Milling top and bottom with chamfer or R2 radius - Flat scraper - 1.2 kg Teflon glue tank - Pre-cut guillotine - Edgeband trimming with two saw units - Quick machine calibration system by placing a piece of edgeband in the dedicated clamp - The machine has been regularly serviced, lubricated, and cleaned, ensuring its excellent technical condition. - An ideal solution for demanding carpentry workshops and manufacturing plants.

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,5 - 4,0 mm material cross-cut 1200 mm² roll diameter 80 mm feed length - 9999,9 mm speed - 90 m/min weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 1,0 x 1,2 mxmxm servo roll feed Nodpfx Ajvzxqleg Iewc

Condition: excellent (used), Simodrive feed model Make Siemens Type 6 SC 6116 OAAOO G 600 D 490 / 49 M6 REQ Nwodpfxofhkt Re Ag Ioc Output current 60/120 A Space requirement :D. 290 x W.150 x H.480 mm Weight 13 kg

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 82-15796, input voltage: 400 V, total length: 30,000 mm, total width: 4,000 mm, type of input current: three-phase, plate width: 2,100 mm, plate length: 1,600 mm, Equipment: documentation/manual, See description for all information Njdpfx Ageygm Hps Iewc Fully equipped SAM-X 2-colour machine including feeder, UV dryers, and stacker Year of manufacture: 2001 Full information and documentation can be found in the attachments.

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Nwodpfsx U Eiaex Ag Iec Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Nsdpfevuk Uisx Ag Iswc