Used Kempak 200 for sale (15,503)

Condition: excellent (used), MITSUBISHI MR-S11-200-E31 SER. 0Y20009 Djdpfx Aey S Dvysckech

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg Dcsdsh Hgdropfx Acksh The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: used, operating hours: 4,808 h, mileage: 72,259 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * Condition, see photos * Only 4,808 operating hours * EasyDrive (Hydrostatic drive) (SN) * Ideal for footpaths, bicycle paths, and narrow lanes * Schmidt Swingo, multiple units available * 2 rotating brushes at the front, 800mm width * Sweeping width: 2,800 mm * Extension device at the front * Total water volume 360 liters * Fresh water volume 180 liters * Opening and tilting the container via cable remote control * Air conditioning * Engine VM 56C/9 * Rear view camera * Heated seat * Radio * Air-suspended driver's seat * All-wheel steering can be engaged * 2 seats * Sweeping material container 1.8 m³ * Rotating beacon lights * GVWR 3,500 kg * Unladen weight 2,850 kg * Payload: 1,650 kg * Self-propelled working machine If a new TÜV (German technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety inspection), or a new UVV (accident prevention regulation) inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale, and errors reserved. Dodpfx Aevhqmljckoch

Year of construction: 2024, condition: used, functionality: fully functional, Probst Vacuum Hand Laying Device SPEEDY VS-140/200-XL — Year of manufacture 2024 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Dsdpfx Acsy A Hacjkjch Price EUR 1,900 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2022, condition: used, functionality: fully functional, Leica Laser Level PIPER 200 — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,190 plus VAT | EXW Einbeck | Delivery upon request Dedpfjy A E T Uox Ackech

Condition: used, mileage: 308,774 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, first registration: 03/2016, next inspection (TÜV): 05/2027, emission class: euro6, color: silver, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * LED – High-performance headlights * PDC, front and rear with reversing camera * AVANTGARDE * Navigation system * Cruise control * Leather steering wheel with multi-function buttons and shift paddles * Automatic climate control "2-zone" * Seat heating * Automatic transmission "7-Tronic" * High beam assist * Rain sensor * Light sensor * Start/Stop system * Roof rails * Tinted glass * Alloy wheels * 4x electric windows * Electric and heated exterior mirrors * On-board computer * Business Plus package * Child safety lock "ISOFIX" * Rear seat, partially and fully foldable * Central locking – remote control with 2 keys * Luggage compartment divider net * LED daytime running lights * Stowage compartment * Euro 6 * Hill-start assist * Dynamic Select * Agility Control suspension * ABS, ESP, ASR * 1st owner Dcjdpjzbfm Rsfx Ackoh * The vehicle has been regularly serviced in our in-house master workshop ----Not a taxi or shared vehicle. Vehicle number: 117. WhatsApp number: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE INSPECTION / ONLINE PURCHASE CONTRACT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY FOR AN ADDITIONAL CHARGE Delivery service upon request. Customers from abroad have the option of making a partial payment and picking up the car at a later date. Foreign customers have the possibility to make an partial payment and picking up the car at a later date. NETTO export possible (for vehicles with deductible VAT). ---- We would be happy to take care of your vehicle registration (Düsseldorf) as well as the creation of customs/export license plates or temporary license plates (5 days). Complete export processing possible (export declaration). ----Vehicles with TÜV used car inspection report available. ----If desired, we would be happy to offer you our "GPG" used car insurance with individual solutions tailored to you and your vehicle. ----Trade-in possible. ----If you have any further questions, please do not hesitate to contact us by telephone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday from 9:00 - 16:00 ----Changes, typographical errors, errors and prior sale are reserved. Offers are non-binding. All information without guarantee. Vehicle descriptions are expressly not guaranteed characteristics.

Condition: excellent (used), Year of construction: 2004, The IRB 6650 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 200 kg Arm Reach: 2750 mm Model Type: IRB6650 Model Year: 2004 Condition: Used Included: Manipulator + Control Cabin + All Wire Sets + Teachpendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. Dcsdpfx Acoyrix Eekoh As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Dcjdpfoy U Hriox Acksh

Condition: excellent (used), functionality: fully functional, overall weight: 250 kg, Year of construction: 1995, Kinshofer Grapple 605-200 / Loading Crane • Manufacturer: Kinshofer Grapple Technology GmbH • Type: 605-200 multi-purpose or shell grapple • Year of manufacture: 1995 • Hydraulic grapple for loading crane • Used for gripping and moving materials • Areas of application: scrap metal; logs; stones; demolition material; recycling material • Load capacity: 3000 kg • Weight: 250 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, Dcodpjy Taqiofx Ackeh - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line for glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 200 BPM (miniature 0.05L bottles)Filling type: vacuum fillingBottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant aut... Dcjdpsy Uduusfx Ackjh

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, suction capacity: 1,200 m³/h, total height: 2,970 mm, total length: 930 mm, total width: 930 mm, overall weight: 250 kg, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Dcodpfx Aev S E Ncsckjh

Condition: used, Year of construction: 2000, turning diameter 400 mm turning length 1000 mm control FAGOR Djdpfxjvh I T Ae Acksch control CNC 8055/B-T centre height 200 mm centre distance 1000 mm turning dia. over face-slide 210 mm bed width 300 mm spindle bore 65 mm spindle turning speed range 0 - 3000 U/min transmission ratio 2 feeds - longitudinal 0 - 10.000 mm/min feeds - cross 0 - 10.000 mm/min rapid travel - longitudinal/face 15 m/min tailstock quill diameter 68 mm tailstock quill stroke 155 mm tailstock taper MT 4 total power requirement 8 kW dimensions 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm Dedpfxovb I Itj Acksch dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Year of construction: 1996, grinding diameter 5 - 255 mm grinding length 400 mm centre height 130 mm grinding length at plunge grinding 50 mm control SINUMERIK 805 grinding spindle speed 25 - 1400 U/min work piece spindle speed 0 - 500 U/min feed of grinding spindle slide cross 0 - 5000 mm/min table speeds 0 - 5 m/min grinding wheel diameter 450 mm total power requirement 10 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel Dedotqqtrjpfx Ackech

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader Dcjdpfx Acjy S Sw Sokeh • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Further information Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads Dcedpji Ri N Ujfx Acksh Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front 2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. Dcodpjuhm E Ssfx Ackjh The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: used, mileage: 179,502 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 12/2018, next inspection (TÜV): 05/2026, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * LED "High Performance" Headlights * 9-speed automatic transmission * Navigation system * Park Distance Control (PDC) front and rear with reversing camera * Avantgarde Exterior Package * Parking Package * Ergonomics Package * Business Plus Package * Leather multifunction steering wheel with paddle shifters * Cruise control * Rain sensor * Roof rails * Alloy wheels * 4x electric windows * Electrically adjustable and heated exterior mirrors * Light sensor * Heated seats * Lumbar support * LED daytime running lights * Tinted windows * Child safety system "ISOFIX" * Rear seat foldable (split) with through-loading capability * Center armrest with storage compartment * 2x USB ports * Load compartment cover with partition net * Automatic climate control * Start/Stop system * Smartphone Integration Package "Apple Car Play" and "Android Auto" * Drive mode selector "Agility Select" * ABS * ESP (Electronic Stability Program) * Central locking with remote control and 2 keys * Sound system * Euro 6d-TEMP emissions standard * On-board computer with trip computer * Piano lacquer finish * Comfort suspension * 1st owner * Full service history, exclusively maintained by MB Vehicle number: 106 Whatsapp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE SALES CONTRACT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY FOR AN ADDITIONAL FEE Delivery service available on request Foreign customers have the possibility to make a partial payment and pick up the car at a later date. NET price for export possible (for vehicles with VAT deduction). Dcjdpfx Aceyqcd Sekoh ---- We are happy to take care of your vehicle registration (Düsseldorf) as well as the issuance of customs/export license plates or transfer license plates (5-day). Complete export handling possible (export declaration). ---- Vehicles with TÜV used car inspections available. ----Upon request, we are pleased to offer our GPG Used Car Warranty with individual solutions tailored specifically to you and your vehicle. ----Trade-ins accepted. ----For further questions, please feel free to contact us by phone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday from 09:00 - 16:00 ----Subject to change, errors, and prior sale. Offers are non-binding. All information provided without guarantee. Vehicle descriptions do not constitute guaranteed specifications.

Condition: new, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Our welding tables are manufactured with HT 300 casting quality. All welding tables are also available in a nitrided version. • Plate thickness: 25mm All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. Dcedpfjymf Tuex Acksh 3D welding table - 3D clamping devices - 3D precision welding table

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Dcsdpfx Aoy Tw Tzsckeh Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools The machine is not fully operational; the right-hand cylinder is leaking; the machine descends unevenly; the hydraulic pump is noisy Dcodpfjwn Hfijx Ackoh

Condition: used, operating hours: 5,321 h, mileage: 24,112 km, power: 62 kW (84.30 HP), first registration: 07/2009, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 750 kg, empty load weight: 2,750 kg, next inspection (TÜV): 03/2027, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, immobilizer system, onboard computer, power assisted steering, soot filter, * German vehicle * 1st owner * Original, only 24,112 km * Only 5,321 operating hours * TÜV (technical inspection) valid until 03/2027 * Documentation available * Condition, see photos * All-wheel steering, switchable * Hydrostatic drive (Easy Drive) * 2 front sweeping units, 800 mm width * Sweeping width: 2,700 mm Dedpfx Aoza Hmiscksch * Extension device * Ideal for sidewalks, footpaths, and bicycle paths, narrow streets, etc. * Sweeping container 1.8 m³ * Water tank 190 liters * Opening and tilting of the container via cable remote control * Engine: VM 05D/9 * Power: 62 kW * 50 km/h approval * Working speed: 12 km/h * Cruise control * Air conditioning * Rotating beacon * Rear view camera * Permissible total weight: 4,250 kg (technically possible) * Permissible total weight: 3,500 kg * Unladen weight: 2,750 kg * Payload: 750 kg * Self-propelled working machine, therefore free access to all environmental zones * If sold to businesses and for export (non-EU and EU), the German commercial regulations apply. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible and expressly desired at any time by appointment. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), first registration: 09/2011, empty load weight: 340 kg, maximum load weight: 160 kg, overall weight: 500 kg, axle configuration: 4x4, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Equipment: all wheel drive, * Dücker extension arm UNA 200 * The basic unit is used to hold various implements * Reach: 3.40 meters * Transport width: 1.65 meters * Weight of basic implement 340 kg * Displacement of 1.15 meters * The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive. * Swivel angle of implement 140° * Year of construction: 2011 If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Dcsdpjxl Skvofx Ackoh You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Good, used condition Main motor: 11 kW Maximum throughput: 200 kg/h Year of manufacture: 12/2008 / Technically tested: 01/2025 Briquettes: 150x60 mm . Dedpfx Acet Hxudjksch *Used machine, purchased as is Functional guarantee upon delivery

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Dcjdpfx Acjhwt H Ajkeh Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.