Used Kockerling Allrounder for sale (155)

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. • Opening stroke: 500 mm • Platen size: 570 x 570 mm • Max. volume: 144 cm³ Ijdpfx Abeyglrwjrohu

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units Iodpfx Aoygx Urjbrshu

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Ijdpfx Aeyf Ha Hobrehu Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: excellent (used), Year of construction: 2011, operating hours: 34,217 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, total length: 5,940 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 8,300 kg, Injection Moulding Machines ARBURG Allrounder 570 H 2000-800 Stock No.: 503669 Manufacturer: ARBURG Model: Allrounder 570 H 2000-800 Control System: Selogica Year of Manufacture: 2011 Operating Hours: 34,217 h For sale is a used ARBURG Allrounder 570 H 2000-800, year 2011. This machine features a screw diameter of 50 mm and a clamping force of 2000 kN. Ideally suited for efficient and precise injection moulding applications in plastics processing. Contact us for further information and a customised offer! Technical Data – Clamping Unit Clamping force: 2000 kN Tie bar spacing (h x v): 570 x 570 mm Ijdpfx Absydkyzorehu Platen size (h x v): 795 x 795 mm Min. mould height: 250 mm Max. mould height: 550 mm Max. daylight: 1000 mm Opening stroke: 450 mm Ejector stroke: 200 mm Ejector force: 60 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 1300 kg Technical Data – Injection Unit Screw diameter: 50 mm Shot volume: 392 cm³ Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 1000 Nm Free-flow injection rate: 656 g/s PS Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions (LxWxH): 5.94m x 2m x 2.21m Total weight: 8300 kg Equipment HMI in German Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Mould heating 12x

Condition: new, Year of construction: 2023, Clamping force: 320 t Screw diameter: 30 mm Shot weight: 97 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 106 cm3 Type: Multicomponent Ijdpfsyg I Emex Abrshu Drive: Hybrid

Condition: new, Year of construction: 2023, functionality: fully functional, Clamping force: 500 t Screw diameter: 60 mm Shot weight: 620 g Ihodpfx Ajyg I A Ssbreu Distance between tie bars V: 920 mm Distance between tie bars H: 920 mm Shot volume: 678 cm3 Type: Multicomponent Drive: Hybrid Special multicomponent machine

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s Ihjdpoydnigsfx Abrsu • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, • Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm Ihodpjwgamkofx Abrsu • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg Euromap

Year of construction: 2011, condition: ready for operation (used), Two Arburg injection molding machines including temperature control units, conveyor belts, cranes and one robot are available. 1) Arburg Allrounder 170S 180-30, year of manufacture: 2011, tie bar spacing: 220mm, crane load: 350kg, total connected load: 50kW, automatic hours: 38396h, pump hours: 42595h, weight: approx. 1750kg. Including Tooltemp TT 157E, Tooltemp 157Es, crane and conveyor belt FA-LU600/LA1400xB300. 2) Arburg Allrounder 170S 180-30, year of manufacture: 2011, tie bar spacing: 220mm, crane load: 350kg, total connected load: 50kW, automatic hours: 44090h, pump hours: 49127h, weight: approx. 1750kg. Including Tooltemp TT 157E, Tooltemp 157Es, crane and conveyor belt FA-LU600/LA1400xB300. Documentation available. On-site inspection is possible. Individual sale possible. Ijdoyiflyepfx Abrshu

Condition: ready for operation (used), A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554. Only package sale is possible. Documentation available. On-site inspection is possible. Ihodpfx Aboycig Dersu

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Ihsdpfx Absyddy Isreu

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Isdpfxjyddy Uj Abrehu

Year of construction: 1999, condition: ready for operation (used), An old Arburg injection molding machine and five HB-Therm temperature control units are available. 1) Injection molding machine Arburg Allrounder 270S 250-70, clamping force: 250kN, tie bar distance: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, mold height range: 200mm/550mm. 2) Temperature control unit HB-Therm HB-W 140, year of manufacture: 1999, max. temperature: 140°C, flow rate: 40l/min, max. operating pressure: 12bar, machine dimensions X/Y/Z: approx. 650mm/300mm/1000mm, weight: approx. 75kg. An on-site inspection is possible. Ihsdpfxoxvdfao Abrju

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Ihedpfx Asw Rqwtjbrju

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Ihsdpfx Ajx E Ac Eebrju

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Iedoygw Siopfx Abrohu

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Iodpsxrf Nlefx Abrohu

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Iedsrc Hibopfx Abrohu

Year of construction: 2001, condition: ready for operation (used), Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement. Iodjxx Ufijpfx Abrjhu

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Ihedor N Rh Hopfx Abrou

Year of construction: 2020, condition: ready for operation (used), Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 22mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 12400h. Documentation available. An on site inspection is possible. Ihedpox E Acxsfx Abrsu

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Ijdpfeilhfcex Abrjhu

Year of construction: 1998, operating hours: 62,144 h, condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Ihodov Ifwxspfx Abreu

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Isdpfx Aeyddzlsbrjhu

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible. Ihodoyddzfopfx Abrsu