Used Kockerling Vector 620 for sale (1,572)

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Hedpfx Aex Di Rqeg Iji Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, This listing is for 1 of 7 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Hedpfxjxhdx Dj Ag Iji Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: new, Heidenhain LC 493F / 50nm ML 620 ID: 557642-12 linear scale, serial no.: 36325388R + Heidenhain AE LC 4x3 ID: 575669-07 reading head, serial no.: 36220199 / 5.0 Fanuc02 50 D M 0MS14.. .. 7C 01.., unused in opened original packaging, 100% functional, scope of delivery as per photos. Hsdpfx Aox Dwudjg Ioi

Condition: new, Heidenhain LC 493F ML 620 ID: 557642-12, linear scale, serial number: 30234117M / 50DM 0MS14…. 7C 01, unused, in sealed original packaging, 100% functional, delivery as per photos. Hsdpfxsx Dwvhe Ag Iji

Condition: new, Heidenhain LC 493F ML 620 ID: 557642-12 linear encoder, serial number: 36441748R, unused, in sealed original packaging, 100% functional, delivery as shown in photos. Hedjx Dwvbspfx Ag Ioi

Condition: used, This listing is for the Watson Marlow 620 Du/R Peristaltic pump The unit is in full working condition and is ready for immediate use Hodpfx Asxhdt Isg Iei The 620DU is a process peristaltic pump (i.e. hose pump) designed for metering, dosing, and transfer of fluids. Because it is a peristaltic design, the fluid is contained entirely within the tubing, avoiding contact with internal moving parts (other than the tubing). It is suitable for remote control, automation, and integration into control systems (SCADA, factory logic, etc.). Wide control range & precision: The large turndown (2,650:1) gives flexibility to handle both very low and high flow rates with fine control. Remote / automation capabilities: Because it supports analog and digital interfaces, it’s well-suited for integrated systems. Pump protection & security: PIN locking helps avoid unintentional changes in process-critical applications. Low maintenance on non‑wetted parts: Since only the tubing contacts fluid, mechanical wear is mostly on the tubing, making part replacement simpler. Safe to run dry: Peristaltic pumps typically tolerate running dry without damage (unlike many positive displacement pumps). Reversible / ability to back‑flush: This is helpful when attempting to clear lines or avoid clogging. Limitations / Considerations Tubing wear / life: The hose or tubing is the consumable component. Chemical compatibility, pressure, and mechanical stress affect how often tubing needs replacement. Upper pressure / flow limit: While it handles decent pressure (~2 bar standard, possibly up to 4 bar variant), it’s not suited for very high-pressure pumping tasks. Enclosure limitations (non-“N” model): The standard 620DU is not fully sealed, so it may not be ideal for wet or harsh environments unless you use the “N” variant. Cost / complexity: More features, interfaces, and protection can make the system more complex (and costlier) to configure, install, and maintain.

Year of construction: 2025, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Hjdpfx Agjxq Nylo Isi Minimal webs for maximum screening performance Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Short lead times and fair prices Contact us for your individual offer!

Year of construction: 2025, condition: new, Screening drums suitable for all common screening machines such as Doppstadt SM 314/ SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight Hedpowxrm Tsfx Ag Iji - Smallest webs - Welded-in helix - in various material thicknesses - Sharp-edged perforated sheets of the highest quality - Perforated sheets made of special steel We deliver our drums free of charge. Many models in stock with no waiting time.

Year of construction: 2025, condition: new, Screen drums suitable for all common screening machines such as Doppstadt SM 314/ SM414/ SM518/ SM618/ SM620/ SM720/ SM 725, Terra Select T4-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar 18.47, 20.55, 20.72, Terex, Neuenhauser, and others. - Manufactured according to your specifications: - Perforations (including variable hole patterns within the drum) - Square or round perforations - Offset or straight layout Hedpfexn A E Aex Ag Iji - Minimal web widths - Welded-in spiral flights - Available in various material thicknesses - Perforated sheets with sharp edges, highest quality - Perforated sheets made from special steel We deliver our drums free to your door. Many models available from stock without waiting time.

Condition: used, overall weight: 38,000 kg, first registration: 04/2012, Pipe semi-trailer First registration: Axles Roll-up door German vehicle from 1st owner Hjdpfxsx Hc D Se Ag Iji Unit: Carrier Vector 1850 Tel: We are happy to assist you with financing or leasing EU sale: net price upon presentation of company documents and VAT number VAT deposit €2,000 we speak English govorimo srpsko-hrvatski Our services for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Tel:

Condition: used, This listing is for a VWR 620 Standard Magnetic Stirer Hedjxzhafepfx Ag Isi

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,377 h, Control Unit Brand HEIDENHAIN Model iTNC 640 General Data Measurements width 2325 mm Measurements depth 4210 mm Measurements height 3108 mm Machine weight 9500 kg Main Drive Spindle speed range 12000 Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 620 mm Y-Axis Movement 520 mm Z-Axis Movement 460 mm Tools Max weight 7 kg Max tool diameter 78/125 mm Max tool length 250 mm Media Internal cooling Yes Chip conveyor Yes Additional Equipment CE compliant Kinematics HH Linear scales in X/Y/Z Hsdpfex D Eb Esx Ag Isi Blum probe for workpiece measurement Spindle expansion compensation Handwheel Water gun Working area flushing Spindle oil cooler Oil skimmer This 5-axis KAFO KFO 620 5AX was manufactured in 2019. It features a spindle speed of 12,000 rpm, a tool changer with a capacity of 40 tools, and a spindle taper SK 40. The machine dimensions are 4210x2325x3108 mm, and it weighs 9500 kg. It includes a chip conveyor, spindle oil cooler, and is CE compliant. If you are looking to get high-quality milling capabilities consider the KAFO KFO 620 5AX machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Hedjwbp Nwepfx Ag Isi No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Hedpfx Agst Ty A Aj Ioi No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Hodpfx Astt Iudeg Isi Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel Hsdpfxelikvhe Ag Iji X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Hjdpfx Agett Dqps Iei Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Hsdpolikydjfx Ag Iei Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 7C0225, total width: 3,850 mm, total length: 5,600 mm, Lectra Vector 2500 Furniture XXL – TYPE VT25 Year of manufacture: 2007 · Usable cutting width: 290 cm · Fully overhauled in 2024 · Good condition Cutting machine for precise, large-format, multi-layer textile cutting. Technical Specifications & Operating Hours: Model: Lectra Vector 2500 Furniture XXL Type: VT25 Furniture 118 Hsdpfx Agsx S Hx Rs Iei Year: 2007 Usable cutting width: 290 cm Technical condition inspected by Lectra in June 2023 Cutting hours according to Lectra audit (06/2023): approx. 3,575 h, currently (12/2025) 3,585 h Vacuum hours according to Lectra audit (06/2023): approx. 11,278 h, currently (12/2025) 11,410 h Two-stage vacuum system ensures reliable multi-layer cutting Conveyor belt replaced Regularly serviced; mechanically flawless Roll carousel (paternoster) also available for purchase Fields of Application: Ideal for large-format textile cutting, including: - Upholstery & padding materials - Curtains and drapery fabrics - Bed linens & home textiles - Other textiles with wide fabric widths The machine is operational, well-maintained, and has been minimally used since the last official Lectra inspection.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2017, loading space length: 7,000 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, Equipment: ABS, tail-lift, Fabag AH 18 Refrigerated Box Body Carrier Vector Tail Lift Ref. No. for Inquiries: 1225953 * Condition: Very good * Own weight: 6,040 kg * ABS Hsdox Rr I Uspfx Ag Isi * EBS * BPW axles * Duomatic * 2 air-suspended axles * Aluminium underrun protection * Disc brakes * Interior lighting * Tail lift: Dautel, load capacity up to max. 2,000 kg * Refrigeration unit: Carrier Vector 1550 Dimensions (Cargo area/load platform) Cargo length: 7,000 mm Cargo width: 2,490 mm Cargo height: 2,300 mm Tyres: * Front axle: 385/55 R 22.5 air suspension / 35% * Rear axle: 385/55 R 22.5 air suspension / 35% ---- Price: 14,900 EUR + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak: German, English, French and ????? Subject to typing errors, mistakes, and prior sale.

Condition: ready for operation (used), HANDTMANN VF-620 F,P,A + grinder drive PCK-3 The machine after technical inspection. 3 months warranty for parts. Machine with clipper socket. Machine with loading. Hsdpfx Ajw E D Susg Isi Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation.

Condition: reconditioned (used), Year of construction: 2014, HANDTMANN PVLH-228 2014 year The machine after capital renovation. All bearings and sealings in this machine are new. Hedpfx Ageq Rc Upo Ioi 3 months warranty for parts. New funnels and brake.

Condition: used, maximum load weight: 33,090 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2013, next inspection (TÜV): 10/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, total width: 2,600 mm, Year of construction: 2013, Brand of refrigeration unit: Carrier Further information: * Unladen weight: 8,910 kg * Maximum axle load | First axle: 9,000 kg * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear Additional equipment: * Rear doors * Homepage * Steering axle * Lift axle * SemCollection * SemStars * Central lubrication Semtrade B.V. Contact | Martin Klaaijsen | Tel: | WhatsApp: | Email: Export costs | Please check in advance for applicable costs and procedures for your country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Hedow R Ivtopfx Ag Ioi Disclaimer: Subject to change, prior sale, and errors. --- Listed prices exclude BPM and apply only to export.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,091 h, load capacity: 1,600 kg, lifting height: 6,200 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 3,300 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach Truck Load Center: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Battery Voltage: 48V Battery Ah: 620Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year of Manufacture: 2019 Battery Condition: 60 - 80% Hodpsxya T Uofx Ag Ioi Description: New inspection and accident prevention regulations Sideshift, 3rd valve, full free lift, safety light, joystick, single pedal, seat, single-pedal operation, FloorSpot rear and front, flashing light, multi-color display, joystick (multi-pilot), ISM module, battery can be regenerated upon request (for an additional charge).

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,227 h, load capacity: 1,600 kg, lifting height: 6,200 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 3,300 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach Truck Load Center: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Battery Voltage: 48V Battery Ah: 620Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year of Manufacture: 2019 Battery Condition: 60 - 80% Description: New inspection and accident prevention regulations Sideshift, Hodpfx Agsxya S Dj Iei 3rd valve, full free lift, safety light, joystick, single pedal, seat, single-pedal operation, FloorSpot rear and front, flashing light, multi-color display, joystick (multi-pilot), ISM module, battery can be regenerated upon request (for an additional charge).