Used Krones for sale (112)

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system   Podpfew T Sthex Abmopl

Condition: used, Year of construction: 2017, Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A  Pedst Rbznjpfx Abmjpl

Condition: used, Year of construction: 2012, Overview The crater & decrater Linapac II was built in 2012 by German manufacturer Krones. The column was replaced by a new one in April 2021. Techn. Details Formats 3x4 (0,75 lt – 1,00 lt) 4x5 (0,5 lt) 6x12 picking heads Automatic format change Podpju Huykjfx Abmspl

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Ppjdpfx Asl Hx Enebmel

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Psdpfjxhf Hijx Abmspl

Condition: used, Year of construction: 2012, Overview  This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data  Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected Scope of Delivery  Depalletizer | Kettner | 60 pallets/hour | 1992 | Automatic, glass bottles Decrater | Kettner | 2,500 crates/hour | 1992 | For returnable crates Crate washer | Seroba | 2,500 crates/hour | 1992 | Stainless steel, single bath Bottle washer | Krones | 47,200 bottles/h | 2010 | Multi-zone cleaning Empty bottle inspection | Heuft | 46,000 bottles/h | 2012 | Camera system Filler | Krones | 42,300 bottles/h | 2012 | Glass bottles, return operation Labeller | Krones | Topmatic | 2012 | 2 stations (body & back), pitch 125mm + Checkmat Fill level & closure inspection | Heuft | 43,000 bottles/hour | 2012 | Sensor & camera system CIP & mixer station | KHS | 16,500 liters/hour | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bottles/hour | 2012 | Inkjet printer Packing machine (Crater) | Kettner | 2,200 crates/hour | 1992 | Automatic Palletizer | Kettner | 50 pallets/hour | 1992 | Automatic Pallet wrapper | Robopac | 50 pallets/hour | 1992 | With stretch film Pallet labeler | Logopak | 60 pallets/hour | 2014 | Labeling of pallets Bottle conveyor belts | Sidel Gebo | – | 2012 | Stainless steel conveyor technology Pedexrcv Nopfx Abmjpl

Condition: used, Year of construction: 2018, Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET  Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of handling a wide range of container shapes and sizes (glass, PET, cans). Scope of Delivery  Krones ERGOMODUL labeling machine (2018) CE certification, operating and maintenance manuals, wiring diagrams Spare parts and format change components Drying System | KRONES-LINADRY | 2003 Labelcheck | KRONES | Checkmat Ppedpfx Abeyb Smdemel

Condition: used, Year of construction: 2001, Overview  This flash pasteurizer was manufactured in 2001 by German company Krones / APV. The unit was previously operated in a mineral water production facility in Germany. Following the replacement of the complete line, the machine was dismantled and sold individually. It is available immediately and currently in stock. The reason for sale is a line upgrade. Technical data Type: Flash pasteurizer (short-time heating system) Application: Alcohol-free beverages / mineral water Capacity: Guaranteed throughput up to 22,000 l/h Adjustable down to 10,000 l/h Process design: Plate heat exchanger with regeneration, heating, degassing and cooling sections Integrated degassing unit Buffer tank with internal circulation Electrical connection: 230 / 400 V, 3 Ph, 50 Hz Control voltage: 24 V DC Execution: Stainless steel construction CE-compliant according to EU machinery directives Control & instrumentation: Measurement and control technology PLC-based control system Electrical cabinet Interfaces: Mechanical and electrical interfaces according to Krones / APV standards   Psdpjyb Sw Aefx Abmspl

Condition: used, Year of construction: 2017, Overview  This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Capacity: 30,000 bottles/hour (500 bottles/min) Sleeve Applicators: 2-head sleeve feed system Shrink Tunnel: Steam-operated (Shrinkmat) Bottle Formats: 300 ml / 500 ml / 1,500 ml Condition: Very good, low operating hours Operating Hours: 1,563 Scope of Delivery Krones Sleevematic sleeve applicator 2-head sleeve feed system Shrink tunnel (steam) Bottle format parts for 300/500/1500ml PET bottles Ppsdpjwlka Ejfx Abmsl

Condition: used, Year of construction: 2002, Overview This PET bottling line was built between 2002 and 2013 by the German manufacturer Krones and is designed for bottling still and sparkling water in PET bottles with an Alaska neck finish. The line is in production until September 2025 and can be viewed in operation by prior appointment. Technical details Output: 22.000 bph (the nominal speed at 0.5 is 25.000 bph) 60 rinsing nozzle 80 filling valves 15 capping heads Product: Water Container material: PET Neck format: Alaska Label type: OPP Capper brand: Zalkin Years of manufacture: 2002, 2009, 2013 Scope of delivery  Compressor: Atlas Copco ZD2300VSD (2009) Blowing machine: Krones Contiform S14 (2009) Air conveyor: Eurosistemi (2002) Filler: Krones Volumetic, Variojet (2002) Labeler: Krones Contiroll (2013) Pjdpfewqpgzox Abmepl

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Pjdpfxjwzvl Sj Abmjpl

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Pjdpfxoqqz Txs Abmepl

Condition: used, Year of construction: 2009, Overview  The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  Capacity: 28,000 bottles per hour (bph) Bottle Formats: 0.5 L, 1.0 L, 1.5 L Worked Labels: IN REEL Reel Change: Automated Run Time: Approx. 25,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere Scope of Delivery  Krones Contiroll labeling machine (2009) CE certification, operating and maintenance manuals, wiring diagrams Spare parts and format change components     Pedpfxjyb Tt Es Abmopl

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Location: UK Available Immediately Including: Pedpfoxb Uz Ajx Abmepl • Steinecker Mill • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station • Vapour Condenser • Condensate Cooler • Spent Grain System Contact Indassol UK for Pricing and more details. We are at Drinktec - Please reply to set up a meeting to discuss further.

Year of construction: 2000, operating hours: 80,000 h, condition: used, machine/vehicle number: PX17, Technical Specifications & Performance DataThis Krones premix mixer is a robust processing unit designed for beverage production lines requiring reliable, high-throughput syrup and water mixing. Manufactured in 2000, it offers industrial performance and quality consistent with Krones engineering. The system is suitable for integration upstream of filling and carbonation stages within used bottling line environments and broader industrial packaging applications.Manufacturer: KronesYear: 2000Production capacity: up to 45,000 L/hElectrical rating: 230/400 V, 3~Frequency: 50 HzRated current: 87 AAllowable operating overpressure: up to 3.5 bar (vessel rating)Certification: CE marking; manufactured under ISO 9001 quality managementAdvanced Automation & Control SystemsThe premix system is configured for stable, repeatable mixing performance with industrial-grade electrical components. The three-phase power configuration at 230/400 V and 50 Hz supports dependable operation across beverage processing shifts. Safety and compliance are supported by CE marking and ISO 9001 manufacturing standards. The unit’s control architecture is suitable for integration with line-level PLC/HMI systems commonly used in beverage production.Three-phase 3~ electrical systemRated current 87 A for robust process dutyCE-compliant safety and quality designEngineered for consistent ratio control and process stabilityProduction Line Integration CapabilitiesEngineered for inline use, this premix mixer integrates seamlessly with upstream syrup room equipment and downstream carbonators, fillers, and packaging machinery. It supports second hand and retrofit projects, enhancing capacity and process stability in existing beverage production layouts. The system fits PET or glass bottle lines as part of a complete packaging chain, from processing to filling, labeling, and capping.Inline or standalone operation within beverage processingIdeal interface to carbonators and filling machinesSupports industrial packaging workflows in used bottling line upgradesFlexible adaptation for PET and glass bottling linesMachine Condition & Maintenance HistoryThe machine is installed under power and available for quick sale. It is not currently in active production and will require dismantling for removal and relocation. Operating hours are approximately 80,000, consistent with a well-maintained industrial processing unit of this class.Under power, not currently in productionApprox. 80,000 operating hoursAvailable for prompt sale and dismantlingOperational Performance & VersatilityDesigned for beverage production, the Krones premix mixer provides accurate blending of water and syrup for a wide spectrum of products. Its vessel overpressure rating up to 3.5 bar supports stable operation in line environments that may feed carbonation steps and high-speed filling. This makes it a strong fit for producers aiming to boost throughput, stabilize quality, and modernize existing second hand bottling equipment setups.High-throughput mixing up to 45,000 L/hSuitable for still and carbonated beverage processing workflowsConsistent dosing and mi... Psdpfx Ajycvuuobmopl

Condition: used, Year of construction: 2000, operating hours: 34,364 h, functionality: limited functionality, machine/vehicle number: 960-08, total width: 2,550 mm, total length: 3,600 mm, total height: 2,300 mm, type of input current: three-phase, outer diameter of label roll: 400 mm, inside diameter of label roll: 80 mm, overall weight: 4,000 kg, input voltage: 400 V, year of last overhaul: 2025, operating temperature: 25 °C, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, Krones Variomatic Machine for Sale Pjdpfsyb Db Hjx Abmepl A Krones AG Variomatic machine is offered for sale, designed for industrial use in bottling and winery environments. Manufacturer: Krones AG Year of manufacture: 2000 Serial number: 733-048 Quality management / origin: ISO 9001 Technical specifications: Supply voltage: 400 V Power type: 3-phase (3~) Frequency: 50 Hz Rated current: 20 A Capacity: approx. 6,000 bottles/hour Features: Krones Variomatic control / drive system Robust industrial design Reliable operation and long service life Can be integrated into bottling lines Applications: Wineries Beverage bottling plants Small to medium-capacity filling and bottling lines The machine comes from an industrial operating environment. Viewing is possible by prior arrangement. 📍 For further information, please feel free to contact us.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Labelling Machine – Krones Vinetta (refurbished, operational, excellent condition) For sale is a fully functional Krones Vinetta labelling machine with wet glue technology – reliable, robust, and ready for immediate use. Technical specifications & features: Manufacturer: Krones AG Model: Vinetta Year of manufacture: approx. 1998 General overhaul: 2021 (completely overhauled both mechanically and electrically) Output: approx. 2,500 bottles/hour Bottle sizes: 0.33 l and 0.5 l Labelling stations: 2 (stations for front and back labels) Labelling method: Wet glue with 2 wet glue pumps Control system: Siemens PLC (modernised, user-friendly) Condition: in ongoing operation, technically and visually immaculate Documentation: complete technical documentation available Special features: Proven Krones quality, durable and low-maintenance Precise labelling even at variable output speeds Spare parts supply still guaranteed by Krones Compact design – fits perfectly into smaller bottling lines Performance class: Ideal for bottling lines between 2,000 and 3,000 bottles per hour Ppedpfjxpunxsx Abmsl

Condition: used, Year of construction: 2009, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Ppodpfjx H Tgdex Abmel Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: used, Year of construction: 2004, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Psdpfx Asx H Tf Tebmepl Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: used, KRONES AG Monoblock (with Sauerstein SD 1500/1100/950 unit and KRONES cooling device Manufacturer KRONES AG – Neutraubling, Germany Type Stainless-steel guarded industrial monoblock (in-line integrated unit) with process and cooling auxiliaries Industrial Applications Ppedpox N Utdsfx Abmsl KRONES in-line unit for automated packaging environments requiring a protected enclosure, continuous conveyor operation, and integrated auxiliaries. The configuration shown includes a Sauerstein air unit and a KRONES cooling device for thermal control of integrated equipment/cabinets. Main Technical Specifications Air unit (Sauerstein nameplate) - Brand: Sauerstein - Type: SD 1500/1100/950 - Reference (Kom.): 10.462 - Year (Baujahr): 01/10 Cooling device (KRONES nameplate – Kühlergerät) - Part-No: Serial-No: M6530292550 - Supply: 230 V, 50/60 Hz, 2~N - Rated / start current: 1.5 A / 3.2 A - Power input: 315 W - Cooling capacity: 320 W - Refrigerant: R134a, 96 g - Protection rating: IP54 / IP24 In/Out - Max pressure: PS35 / PO30 bar - Year: Fuse: 6 A T - Operating range (min./max.): 20 °C – 55 °C - Internal minimum setpoint: 35 °C - Weight: 13 kg - Manufacturing: Malta (European Union) - Markings: CE, cRUus Machine Usage This KRONES monoblock is an in-line integrated unit designed for industrial operation within a guarded enclosure. The identified auxiliaries provide process support functions, combining air handling via the Sauerstein module and dedicated cooling via the KRONES unit to maintain thermal stability of on-board equipment. Features / Differentiators - Guarded stainless-steel monoblock design suited for automated production areas. - Integrated KRONES cooling device with 320 W cooling capacity and R134a refrigerant, engineered for industrial duty (IP54). - Full traceability of auxiliaries through part numbers and serial numbers (Sauerstein SD 1500/1100/950, KRONES , M6530292550).

Condition: used, Year of construction: 2010, KRONES Pressant Universal Layer Depalletizing / Discharge Module – BEHÄLTERABSCHIEBER 1 (KR70153) Manufacturer KRONES AG – Böhmerwaldstr. 5, D-93073 Neutraubling – Made in Germany (CE) Type Depalletizing / handling: container pusher–discharge unit (Behälterabschieber) integrated in KRONES Pressant Universal system Industrial Applications Automatic layer depalletizing of containers (bottles, cans, jars) with controlled transfer from pallet layers to infeed conveyors. Typical upstream use in beverage and food packaging lines (glass, PET, cans), at pallet unloading areas. Pedpfox N Ur Hox Abmopl Main Technical Specifications: - Machine designation: BEHÄLTERABSCHIEBER 1 - Series / Type: PRESSANT UNIVERSAL - Equipment ID: KR70153 - Year of manufacture: 2010 - Compliance: CE - Origin: Made in Germany 🧩 Machine Usage The KRONES Pressant Universal – Behälterabschieber is designed to push/discharge containers during layer depalletizing operations. It provides consistent product transfer to conveyors, stabilizes infeed flow, and improves reliability in automated depalletizing zones. ⚙️ Features / Differentiators - Dedicated discharge function: engineered for controlled pushing/diverting of container layers or flows. - KRONES Pressant integration: built for seamless mechanical integration within KRONES depalletizing architectures. - Clear traceability: identified by KR70153 and 2010 for service and spare parts management.

Condition: good (used), Automatic labeling machine Podpfx Abehz Dausmepl

Condition: good (used), Year of construction: 2001, Krones bottle washer, year of manufacture 2001 676-039 6000 bottles/hour, 0.2l-1.0l bottles Machine will be available in December 2026 6000 bottles/hour Ppsdpfxsx N I R No Abmol

Condition: used, Year of construction: 2006, COMPLETE BOTTLING LINE KRONES 30,000 bph Product: still water Speed: 30,000 bph – 1.5 L PET Preform tipper - 2018 Model: m.tanner ag/prologic Caps elevator Gassner - 2006 Manufacturer: Gassner Preform aligner (part of the blow molding machine) - 2006 Monobloc with blow moulder, filler and capper Blow molding machine - 2006 Brand: Krones Model: Krones Contiform S20 Type: Rotary Number of molds: 20 Filler - 2006 Brand: Krones Model: Krones Volumetic Direction: Counterclockwise Number of filling valves: 84 Type of filling system: gravity flowmeter Capper (part of the monobloc) - 2006 Brand: Krones Number of heads: 18 Type of cap: Alaska 3 Principles Distribution system: pick & place Nitrogen dispenser - 2006 Model: Cryotech International Inspector for level control and cap - 2006 Model: Krones Checkmat Bottle transport - 2006 Model: Krones Synco Dryer tunnel - 2006 Brand: Europool Model: TF-04 Labeller - 2006 Brand: Krones Model: Krones Etima Type of labeller: Rotary Direction of rotation: Counterclockwise Type of labeling: Rollfed Number of stations: 1 Number of heads: 18 Type of applicable labels: OPP Plate handling: lobe cam Head adjustment: electric American input and 2 parallel outputs Label presence check on output tape Psdpfx Absvwcdzomepl Marker - 2015 Model: Markem Smart Lase C350 Shrink wrapper - 2006 Brand: OCME Model: Vega N70/2 Film launching Dual Input Handle applicator - 2006 Brand: Comag Model: Decimo HM 100/2 Equipped for bundles: 3x2 Dual Input Bundle transport: Brand: Europool Palletizer - 2006 Brand: OCME Model: Pegasus M400 Type: Layered Pallet warehouse Interlayer system Maximum workable height: 225 cm - pallet Workable pallet size: 80 cm x 120 cm Pallet wrapper - 2006 Brand: Bema Model: Silkworm Turbo Maximum workable height: 225 cm - pallet Wrapping type: rotary table Top sheet spreader Pre-stretch Pallet labeller - 2020 Brand: Eidos Model: 7P6ERLP

Condition: like new (used), Year of construction: 2011, Used Bottling Line | Used Beverage Line | Used Filling Line NP 657 | COMPLETE PET AXETIC BOTTLING LINE Year: 2011 Speed: 500 ml 30,000 bottles/hour 1000 ml 24,000 bottles/hour 1500 ml 18,500 bottles/hour Production: fruit juices and tea Filling method: aseptic, volumetric Filling temperature: 18-24°C Sizes: 500 ml, 1000 ml and 1500 ml Bottle type: PET bottles Stopper for bottle Standard 28 mm Product: still only Sterilization type: aseptic sterilization PET Blow Molding Machine Krones Contiform Series 3 Krones Aseptic Filling Monoblock Steriljet sterilizer Variojet Rinser Filling machine Podpfjuyhb Isx Abmepl Capper Aseptic Ventilation Isolator VARIO DOS LIQUID ASEPTIC Hygiene Center Sterile Water Treatment AQUA ASEPT Bottle Coding Matrix Laser DDC3 Checkmat FM-X+L fill level sensor PCS process control system KZE product treatment (plate), sterile tank, rework container CIP-System cleaning system Condensate lifting system Krones Contiroll labeler Krones Variopac shrink wrapper Twin Pack handle applicator Krones Robobox Palletizer SYNCO Bottle Conveyor Belts