Used Lamella for sale (97)

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) Redpexhg Ibsfx Ag Isp - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Rjdounvg Tepfx Ag Isp Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months Rodpfx Ajwrn Efsg Ijp CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, MULTIRIP CIRCULAR SAW AND EDGER - IN ONE MACHINE 20-160: 🔹 Main Drive Motor: 37–75 kW for consistent, powerful cutting 🔹 Flexible Cutting Configuration: • 1–4 fully adjustable movable - HYDRAULIC OR SERVO - heads Rodewf Ihtjpfx Ag Isp • 1 fixed head, with the option to mount multiple fixed circular blades 🔹 Customizable Board Width: Up to 1000 mm or 1300 mm — tailored to your production needs 🔹 Advanced Mechanisation Options: • Manual or motorized feeding • Centering systems for precise positioning • Outfeed conveyors with integrated sorting lamellas for efficient waste handling • Fully adaptable to your specific requirements Built for durability. Engineered for precision. Designed to optimize your production flow. 👉 Contact us today to customize your EDGER 20-160 to your exact specifications!

Condition: used, - used spiral roller conveyor Redow Ag Dzopfx Ag Iop - 2 pcs separating lamellas - 6,000 mm length - 800 mm roller width - approx. 1,000 mm overall width - approx. 150 mm roller diameter - approx. 430 mm roller pitch - SEW feed gear motor

Condition: ready for operation (used), Conveyor Belt, INCLINED CONVEYOR BELT, Adjustable Conveyor Belt, Used Machine Manufacturer: Mass International s.r.l Model: NS00893 Overall Dimensions: 3590 x 690 x 950 mm Voltage: 380 V, 0.18 kW Height and inclination are adjustable Belt size: 3280 x 390 mm; horizontal side: 740 mm; inclined side: 2450 mm Lamella distance: 520 mm Protection and door structure above the belt are detachable Rsdpfx Aori Tk Isg Iep

Condition: ready for operation (used), Chip Conveyor, Knoll 320 s-1/200, Used Machine Manufacturer: Knoll Type: 320 s-1/200 Year: 2015 Overall dimensions: 6200 x 1310 x 1610 mm Belt dimensions: 500 x 1400 x 4700 mm Redpfx Agswmmlts Iep Lamella spacing: 315 mm

Condition: used, Price on request. Comprising: Rodpjwwg Amsfx Ag Iop Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Performance of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda

Condition: used, Year of construction: 1995, functionality: limited functionality, machine/vehicle number: 6017, total length: 13,500 mm, total height: 2,090 mm, operating pressure: 250 bar, stroke length: 600 mm, Price on request. For sale: 3 double-sided, hydraulic vertical solid wood presses from Minda. We are offering three high-quality solid wood presses manufactured by Minda for sale. The presses can be purchased and operated individually or as a complete package. Technical Specifications: - Design: Double-sided, hydraulic vertical press - Number of press chambers per unit: 2 - Application: Pressing lamella packages into beams or glulam according to DIN 1052 - Pressure monitoring: Automatic - Pressure shoe clearance: 800 mm Special feature: The press force of the first pressure shoe can be individually adjusted – ideal for the production of glulam beams of various lengths. The machines are in good condition. Availability: Immediately Sale: Individual units or as a complete package Location: Allendorf Technical Data: - Max. pressing length: 13,500 mm - Max. lamella width: 320 mm (chamber width 395 mm) - Min. lamella width: 85 mm - Chamber height: approx. 2,090 mm (clear opening) - Pressing height: max. 2,000 mm / min. 1,550 mm - Specific press force: 1–12 kp/cm² - Vertical cylinder stroke: max. 600 mm - Horizontal pressing force per side pressure unit: approx. 8 Mp - Horizontal cylinder stroke: max. 312 mm - Infeed height of roller conveyor: approx. 920 mm - Feed rate: 15 m/min - Vertical pressure point spacing: 400 mm - Horizontal pressure point spacing: 800 mm (1,600 mm) Rodpfx Agjwwgz Ae Isp Operating pressure: (Fill pressure) min. 50 bar (Pressing pressure) max. 250 bar

Year of construction: 1972, condition: not inspected (used), machine/vehicle number: SW3a DP. U. AP. 40923 , sheet shear : A used sheet shear (swinging cut) from the manufacturer Wieger. At the foil or sheet shearing , the cutting gap does not need to be adjusted for cutting different sheet thicknesses. Max. Cutting Power = 10 mm Model or Type: SW3a DP. U. AP. 40923 (with lamellae working clutch with brake, electropneumatically actuated) Construction year: 1972 Rjdpjd Eg Ngjfx Ag Ijp Condition: used (good)

Condition: excellent (used), Picture 1 from manufacturer al example rest pictures original Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing pressure from below: Number of pressing chambers: 2 Max. Blade width: 270 mm Rjdpfjhtd E Asx Ag Ijp Max. Glulam length: up to 18 m Glue beam contour: straight Lateral alignment of the lamellas: included Pressure system: hydraulic Permanent pressure control: included Packing: separate Feeding / discharging: in longitudinal direction

Condition: used, functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Rodpfx Agsigaf Rs Iep Control panel top 4 motors à 0,18 kW for brushes

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 210 mm, cutting width (max.): 2,120 mm, saw blade diameter: 550 mm, height adjustment type: electric, total length: 11,000 mm, overall weight: 2,500 kg, cutting length (max.): 9,200 mm, saw drive: 15,000 W, JRIMAC rip saw "TOP" - NEW - - Cutting length 2200 - 9200 mm - Cutting width 420 - 2120 mm - Cutting direction left - right (right - left on request) - Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. - Precise and clean cut due to strong, self-supporting welded construction of the machine stand. - Carriage guidance via linear guides, with ball-bearing mounted, maintenance-free rollers. - Safety beam mounted above the machine table with 6 mm thick lamella protection. Rodpfxegk Nvno Ag Ijp - Extraction connection Ø 160 mm installed at table height at top right and bottom left ready for connection. - Flexible and efficient working thanks to 250 mm opening of the slat guard above the top edge of the table. - Infinitely variable, frequency-controlled, powerful feed of the carriage. - The maximum feed speed can be adjusted. - Automatic stepless saw blade height adjustment. - Infinitely variable width stop adjustment via several operating levers. - Electronic positioning control. - JRIMAC" saw blade quick clamping system allows quick saw blade changes. - Cut release as standard (small mobile foot pedal). - Front table supports made of wood, plastic or Pertinax coating. - High work safety. - Only high-quality components are used and installed. - The electrical control cabinet is easily accessible at the front of the machine. - The machine electrics are designed for 230/400 volts, 50 Hz. - BG dust-tested - EC type-tested in accordance with Directive 2006/42/EC - Forcibly guided splitting wedge - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: I05BN1159, cooling capacity: 55 kW (74.78 HP), The ENR series consists of air-cooled chillers for industrial use, designed for outdoor installation. The ENR 055 features axial fans, scroll compressors, condensers with finned aluminum lamellae, and a self-cleaning coaxial evaporator for maximum operational reliability. It comes with an internal pump, tank, and uses refrigerant R410A. Cooling capacity is 55 kW at 7/12°C and 35°C ambient temperature. The unit is sold with a new leak test certificate. Rjdpfew Sv Iysx Ag Ijp

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / Horizontal Z = 1,000 mm / Vertical - Continuously adjustable NC swivel head, +/- 105 degrees, as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 seconds - Heidenhain iTNC530 controller, hard disk with approx. 21 gigabytes of free space - HSK100 motor spindle, speed range 20-8,000 rpm, drive power 44 kW, torque 350 Nm - NC rotary table SKH 4/630 Horizontal faceplate Faceplate diameter: 630 mm Standard height: 300 mm Indexing accuracy: +/- 12" Max. load: 900 kg Max. tangential torque at 63 bar: 2400 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis - NC rotary table SKH-NC 9/1450 Horizontal faceplate Faceplate diameter: 1450 mm Indexing accuracy: +/- 12" Without direct measuring system Max. load: 5,000 kg Max. tangential torque with clamping: 16,000 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing circle diameter: 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed working area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table, indexing accuracy +/- 5 degrees Rjdpfsxgnfxex Ag Iep - Direct linear measuring system for X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Working area lighting, 6-fold - Mounting elements - 3D wireless measuring probe - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Unilok ESM 130 zero-point clamping system 36 units integrated in the machine table 16 units embedded in the rotary table faceplate (diameter 1450 mm) 4 units embedded in the rotary table faceplate (diameter 630 mm)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table Rsdpfx Asxg D Atjg Iep 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) Rjdpfxsxg Dhcs Ag Iop 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Kühlmitteleinrichtung, Coolant system for cooling lubricant RUEZ coolant tank with integrated sludge scraper, chip conveyor - Coolant cleaning system for cooling lubricant - Including two-part RUEZ lamella separator. - Including RUEZ safety sump in accordance with WHG with 100% collection space - Including clean tank & RUEZ magnetic roller filter - Year of construction 2022, unused & as good as new - RAL 7035 light gray - Superstructure for chip cart - No belt filter, sediment system - Available immediately - Price VB Description Coolant system: - Capacity approx. 34,720l Redpfx Agotwptte Iep - Filling volume approx. 32,710l - Useful volume approx. 22,020l + approx. 6,017l (clean tank) - L/W/H approx. 7,341mm/2,800mm/2,000mm - Tank walls 4mm/S235JRG2 - Walk-on, split tank cover - Tank supports approx. 100mm - Level indicator OWE 2/C as leakage protection - Inlet/distributor with strainer basket - 2 supply pumps - Type: NB100-25/4-15kW - 2000 l/min at 2.1 bar - Pipe - DN150/125 - Return line - DN 100 - PN 16 - RUEZ float switch RB 200 - 3 / 1900 - Level indicator FTL31-CA4M2AAWBJ as overfill protection (clean tank) - RUEZ control unit - Siemens TIA - SPS: SIMATIC S7-1200, CPU 1215C - Visualization: KTP700 control panel - Indicator light red-yellow-green

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Rsdjtq Hkrspfx Ag Iep Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2962 Ident:171526, Multi-Sided Wide Planer with Beveling Unit LEDINEK SUPERLES 400 4V+4F MACHINE DATA Machine type: Multi-Sided Wide Planer with Beveling Unit, Right-Hand Version Version: Manufacturer: LEDINEK Year of manufacture: 1997 Model: SUPERLES 400 4V+4F Machine No.: 2962 Condition: Used, Ready for use DESCRIPTION SUPERLES 400 4V+4F Multi-Sided Wide Planer with Beveling Unit Heavy-duty, universally applicable planer with an innovative quick-change tool system. The machine is suitable for demanding machining of KVH, glulam lamellas, heavy beams, and glued laminated timber. The machine has 4 work spindles and 4 beveling units, arranged as follows: 1. Horizontal at the bottom 2. Horizontal at the top 3./4. Vertical left/right (opposite) 5./6. Chamfer top left/right (opposite) 7th/8th chamfer bottom left/right (opposite) Tools: Horizontal shaft speed: 3,000 rpm Vertical spindle speed: 4,000 rpm Chamfer spindle speed: 9,000 rpm Tool diameters: Horizontal shafts: 205 mm Rodpfx Agewhvzyj Ijp Vertical heads: 160 – 300 mm Chamfer cutter: Ø 180 / 45° x 10 mm Tools: Two vertical shafts and two planer and thickness shafts are still available. Extraction nozzle diameter: Dressing shaft: 200 mm Thickness shaft: 250 mm Vertical shafts: 2 × 200 mm Bevel cutters: 4 × 80 mm Extraction speed: min. 30 m/sec General: Air pressure: 6 bar Weight: 14,000 kg Installed power: 140 kW with control panel and control cabinet

Condition: used, Year of construction: 2007, Bütfering SCO 313 QEH 1. Cross Sanding Unit "Q" Segment width: 25 mm Unit type: Cross sanding unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 13.5 kW Belt speed: 1-16 m/s Belt dimensions: 5360 x 150 mm Belt air cleaning 2. Unit with Electronic Pressure Beam "E" Segment width: 25 mm Unit type: Unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 7.5 kW Belt speed: 2-18 m/s Belt dimensions: 2620 x 1350 mm Belt air cleaning 3. Unit with Pressure Lamella Belt "H" Segment width: 25 mm Unit type: Unit with electronic pressure beam and internal lamella belt Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 20 kW Belt speed: 1.5-12 m/s Belt dimensions: 2620 x 1350 mm Rodpfx Agsw Sh Ape Iop Belt air cleaning Year of manufacture: 2007 Price: 17,500.-

Condition: good (used), Year of construction: 1999, 1) layer infeed systen (2 lines with 3 hoppers (300, 400, 500 mm) each incl. 2 2 x gluing units + 2 cut off saws 2) vacuum stacking unit + infeed transport belt for press 3) press unit 4) vacuum de- stacking unit + outfeed transport belt 5) all control systems for complete line Rjdpfshmk Umox Ag Ijp capacity: 10 strokes / min or approx 2400 layers/ 4 hrs Product: 3 layer lamella surface with max dimension 2208 x 186 x 4 mm