Used Lathe Engine for sale (22,737)

Condition: reconditioned (used), Year of construction: 2002, Cycle-controlled lathe GILDEMEISTER NEF 320 With MANUAL PLUS 4110 control Year of manufacture: 2002 Spindle bore: 50.8 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Center height: 160 mm Speed range: 10 – 4000 rpm, stepless With the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts Gjdpfx Aoxn Apbjg Tstt 3-jaw chuck Schunk ROTA – S plus Ø 200 mm 2 sets of soft top jaws ICP contour programming Tailstock with extendable quill Chip tray Coolant system Chip rinse gun 6 machine feet Operating manual

Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110 Gtodpfex Tg T Rsx Ag Tst

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: BE55324S, turning length: 300 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 8,000 mm, total width: 2,000 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 18i-TB, MIYANO BNE 51 S CNC lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Connection load: 36 kW The machine is equipped with a main and counter spindle, each fitted with a HAINBUCH chuck, as well as a double turret, each with 12 tool stations. It also includes a bar feeder from BREUNING SIMAG, model: 42.1 R-3000. Attention: The item must be collected between 18 and 26 February 2026 on a date to be agreed upon. Gjdpfx Agsx T Aius Tett FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, Year of construction: 1991, power: 74 kW (100.61 HP), fuel type: diesel, number of cylinders: 6, rotational speed (min.): 2,150 rpm, incl. hydraulic pump and tank Godpfx Agjtphvbo Tett

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Gtodox S Hm Ijpfx Ag Tst Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2000Y/500 CNC Lathe (05/2007) Manufacturer: Mori Seiki Model: NL2000Y/500 Year of manufacture: 05/2007 Condition: used, very good, in operation Control: MSX-850II Optional with tooling and accessories. Gedsx Tp N Iopfx Ag Tott

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck SCHUNK ROTA plus Ø 200 mm 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Gsdpfjxn Ar Asx Ag Tett Operating manual The machine is in very good condition!

Condition: used, Year of construction: 2002, Tacchi HD-1450 CNC 725 x 4000 Heavy Duty Centre Lathe (2002) with Siemens Sinumerik 828D, 1000mm Diameter 4 Jaw Double Chuck, Chuck Bore Diameter 515mm, Barrufaldi Ban 400/4 4 Way indexing Tool Post (2) x 3 Point Steadies, Tailstock, Swarf Conveyor, Centre Height 725mm, Max Swing 1450mm Distance between Centres 4000mm, Main Motor 60kw, Max Workpiece Weight 15,000kg. Country of Origin: Italy Gtodpsx T Ddasfx Ag Tet Location: This lot is located in Aberdeen, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: B3170-0054, turning length: 700 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, quill diameter: 100 mm, overall weight: 7,000 kg, controller manufacturer: FANUC, controller model: SERIES 21i-TB, number of slots in tool magazine: 12, HYUNDAI - KIA SKT 250 M CNC Lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 27 kVA - Max. machining diameter: 410 mm - Max. swing diameter over cross slide: 480 mm - Chuck size: 254 mm - Spindle bore: 95 mm - C-axis: 0.001° - Includes tailstock, a HAINBUCH collet chuck, a 12-station tool turret with live tooling, and a chip conveyor Attention: The item must be collected by binding agreement between 18 and 26 February 2026, on a date to be coordinated. Gtedpex T Ac Uefx Ag Tjt FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, power: 474.4 kW (645.00 HP), fuel type: diesel, number of cylinders: 12, 12 cylinder, type: VT1710 C650, 645 hp Also in stock: Gtsdpfjtmtqhjx Ag Tet CUMMINS 6 cylinder, type: NTA855 C380, 335 hp

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg Gtedpowrxpbjfx Ag Tot

Condition: ready for operation (used), Year of construction: 2008, Takamaz XY-2000 Plus CNC lathe (2008) Gsdpex Ti Hgofx Ag Tjtt Manufacturer: Takamaz Model: XY-2000 Plus CNC lathe Year of manufacture: 2008 Condition: Used, powered up and in production. 2x spindles (2x Hainbuch collet chucks) 2x tool turrets, each equipped Parts catcher Bar feeder Video available. Further information upon request.

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) Gjdpfjw Ew D Dex Ag Tstt 2 revolving centres 1 drill chuck Operating manual

Condition: used, Year of construction: 2014, Technical details: turning diameter: 256 mm turning length: 455 mm swing diameter over slide rest: 260 mm travel -x axis: 198 mm travel -z axis: 508 mm turning speed range - main spindle: 4800 1/min power capacity - main spindel: 18 / 11 kW C-Axis: 0,01 ° turret (x-stations): 12 x VDI 30 Pos rapid power traverse in X-and Z direction: 19 / 24 m/min Number of driven tools: 12 Pos tool taper: VDI 30 Spindle speed driven tools: 5000 min -1 spindle hollow: 52 mm power capacity - driven tools: 4,4 kW total power requirement: 28 kVA Gtodox Th Amepfx Ag Tet weight of the machine ca.: 4.500 kg dimensions of the machine ca.: 2,9 x 2,3 x 2,2 m CNC lathe with tailstock, chipconveyor, hollow clamping cylinder, 3-jaw-chuck AUTO STRONG N 208, dia. 200mm, DXF, tooleye, Ultipockets, Synchronous threading, 3D Graphic, barloader ILS-BREUNING MUK 7012-III, Bj. 2017, accessories: incl. 2 pcs. live tools, incl. 34 pcs standard toolholders, hour meter: approx. 9.500h "machine on", approx. 2.000h "spindle on", approx. 300h "live tools on" *

Condition: good (used), functionality: fully functional, spindle bore: 110 mm, turning length: 3,000 mm, total length: 6,000 mm, total width: 1,400 mm, total height: 2,000 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, overall weight: 8,000 kg, HEIDENREICH & HARBECK HAMBURG 540 lead and feed screw lathe - Center height over bed: 300 mm - Swing diameter over bed: 600 mm Gtodpfsx Tz T Sjx Ag Tot - Center height over carriage: approx. 200 mm - Swing diameter over carriage: approx. 400 mm - Includes tailstock, a Multifix tool holder, and a three-jaw chuck, diameter: 310 mm - Includes a two-axis digital readout by SONY and a steady rest, steady rest diameter: approx. 200 mm Attention: The item must be collected, bindingly, between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 2012, Accessories included. CNC Control: Fanuc-18i-MB Working area X travel: 350 mm Z travel: 1600 mm C travel: 360° Swing diameter over bed: Ø 940 mm Gtodpfx Ajv Awlkog Tot Max. standard turning diameter: Ø 366 mm (10-position standard turret) Maximum turning diameter: Ø 550 mm Maximum turning length: 1580 mm Spindle speed: 20 - 2000 rpm Chuck size: 15"/18" Spindle nose: A2-11 Spindle bore: Ø 130 mm Dimensions (LxWxH): mm Machine weight: 11,000 kg

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Gedpfx Agoxf Ey Ro Tett Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, Nakamura Tome WT 250 CNC Lathe (2008) Manufacturer: Nakamura Tome Model: WT 250 CNC Lathe Year of manufacture: 2008 Condition: used, under power in production Control: Fanuc 18i 4 Axes: X, Y, C, Y Gantry Loader GR 203 Gsdpfx Agjx Tir No Tjtt 2x Spindle 2x Turret (equipped) Further information available upon request.

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Gtsdpfxeuzyw Ds Ag Tet Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Year of construction: 2017, 2017 | MAN TGS 33.500 with Schmitz Cargobull SGF S2 (NEW ENGINE) | Used Tipper Truck | 459568 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 61900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 31 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good truck+trailer. Regular maintenance needed, all function works 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39749 Equippo" is commonly used when looking up more details online. Godpex Tcz Rjfx Ag Tott 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 500571, turning length: 800 mm, spindle bore: 100 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, total height: 3,300 mm, total length: 6,000 mm, total width: 3,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, INDEX G 300 CNC Lathe - Operating voltage: 400 V - Rated current: 80 A Gtodpfx Agox Tz Sns Tet - Connection: 47 kW - Frequency: 50 Hz - Including a double turret each with a 12-station tool turret, as well as a tailstock and main spindle - Includes chip conveyor and two manuals, as well as a BÜCHEL manufacturer filter extraction system Note: The machine can be transported on a standard truck. Note: The item must be collected between 18 and 26 February 2026 on a binding, to-be-agreed date. FCA D-78087 Mönchweiler – loaded onto truck

Condition: good (used), Year of construction: 2004, CNC lathe IRLE - IWDS 1000 CNC MACH-ID 7758 Make: IRLE Type: IWDS 1000 CNC Control: SIEMENS 840D Year: 2004 Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller rest 860 - 1090 mm Gtsdopdp N Ijpfx Ag Tst 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis 950 mm Stroke Z Axis 14900 mm Specifications Metric US Standard Swing over bed Ø 1400 mm Swing over cross slide Ø 1100 mm DBC Turning Length 13000 mm Spindle power 129 kW Workpiece weight 20000 Speeds / ranges 1 - 300 Rpm Feed rate X-Axis 4500 mm/min. Feed rate Z-Axis 4500 mm/min. Dimensions (Estimate) Length 20000 mm Width 3380 mm Height 2200 mm Weight 100000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 246, turning length: 900 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8H, number of slots in tool magazine: 12, TRAUB TNA 400 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 36 kW - Rated current: 70 A - Includes a tailstock and a HAINBUCH chuck, also equipped with a chip conveyor, TOOL EYE, and an additional chuck by FORKHARDT, diameter: 250 mm Note: The item must be picked up, bindingly, between 18th and 26th February 2026 on a date to be arranged. FCA D-78087 Mönchweiler - loaded onto truck Gjdpfxex Tzx Ie Ag Tstt

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: ML0177-000528, turning diameter: 230 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, total height: 2,700 mm, total length: 11,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, spindle nose: A2#6, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: SERIES 31 i-Model A, spindle torque (max.): 208 Nm, number of tool stations in tool turret 1: 12, number of tool stations in tool turret 2: 12, DOOSAN PUMA TT 1800 SY CNC Lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Connection load: 75.21 kVA - Rated current: 13 KA - Total connected load: 68.4 kVA - Maximum distance between spindle noses: 980 mm - Saddle swing: 230 mm - Recommended turning diameter: 210 mm - Maximum turning diameter on upper turret: 230 mm - Maximum turning diameter on lower turret: 230 mm - Maximum machining length (left and right spindle): 230 mm - Bar working diameter: 65 mm - Front spindle diameter: 110 mm - Boring bar diameter: 32 mm - Travel X1: 165 mm, X2: 190 mm - Travel Z1: 700 mm, Z2: 720 mm - Y-axis travel: 100 (+-50) mm - C1 and C2-axis travel: 36° (0.001°) - Rapid traverse X1 and X2 axes: 20 m/min - Rapid traverse Z1 and Z2 axes: 40 m/min - Rapid traverse Y axis: 7.5 m/min - Rapid traverse B axis: 40 m/min - Rapid traverse C1 and C2 axes: 600 rpm - Bed guideway span Z1 axis: 414 mm, Z2 axis: 339 mm - Guideway span X1 and X2 axes: 240 mm - Includes main and counter spindles, each equipped with a HAINBUCH chuck, as well as the tool holders shown in the photos - Includes FMB Turbo 5-55 bar feeder and LNS chip conveyor, year of manufacture: 2013 Gedpfxjx Tzuij Ag Tott Attention: The item must be collected at a binding date to be agreed, between 18 and 26 February 2026. FCA D-78087 Mönchweiler – loaded onto truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: M303004, turning length: 780 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,700 mm, overall weight: 12,000 kg, controller manufacturer: FANUC, controller model: SERIES 18 i-TB, NAKAMURA-TOME WT-300 CNC Lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Main circuit breaker: 300 A - Transformer: 93.4 kVA - Max. diameter (upper side): 199 mm - Max. diameter (lower side): 270 mm - Distance between spindle heads: max. 1100 mm / min. 250 mm - Max. bar capacity: 102 mm (left side), 65 mm (right side) - Chuck size (left side): 305 mm, (right side): 210 mm - Turret force (X-axis) X1: 11,000 N, X2: 11,000 N - Turret force (Z-axis) Z1: 9,000 N, Z2: 6,000 N - Turret force (Y-axis): 6,000 N - Travel X1: 152 mm, X2: 195 mm - Travel Z1 + Z2: 780 mm - Y-axis travel: ±40 mm - B2 axis travel: 850 mm - Spindle speed: 2,500 rpm - Spindle bore: 120 mm - Front bearing inner diameter: 160 mm - Draw tube bore: 103 mm - Spindle center height: 1,228 mm Gedpox Tzp Tsfx Ag Tjtt - Spindle speed R: 4,500 rpm - Spindle bore: 80 mm - Front bearing inner diameter: 110 mm - Draw tube bore: 66 mm - Spindle support: 2-point - C-axis - Rapid traverse speed: 600 rpm - Cutting feed rate: 1 - 4,800 °/min - Upper turret: 12-station turret - Number of tool stations: 24 - Number of turret indexing positions: 24 - Turret outer diameter: 406 mm - Turret thickness: 100 mm - Tool clearance: 641 mm - Turret clamping force: 30 kN - Tool dimensions: 20 and 25 mm - Internal turning tool mounting bore diameter: 25/32 mm - Lower turret type: 24-station turret - Turret outer diameter: 365 mm - Turret thickness: 100 mm - Tool clearance: 600 mm - Tool dimensions: 20/25 mm - Driven tool spindles on upper and lower turrets - Spindle speed: 3,600 rpm - Number of spindle speed ranges: stepless - Number of tool positions: 12 - Toolholder types and sizes: longitudinal holder: 20, transverse holder - Thread cutting holder (longitudinal): M3 - M10 - Thread cutting holder (transverse): M3 - M10 - Cutting and feed speeds X1 and X2: 16,000 mm/min - Cutting and feed speeds Z1 and Z2: 27,000 mm/min - Cutting and feed speed B2 axis: 27,000 mm/min - Cutting and feed speed Y-axis: 6,000 mm/min - Feed rate X1 and X2: 1 - 4,800 mm/min - Feed rate Z1 and Z2 axis: 1 - 4,800 mm/min - Feed rate B-axis: 1 - 4,800 mm/min - Feed rate Y-axis: 1 - 4,800 mm/min - Including the tool holders visible in the photos as well as two HAINBUCH collet chucks in the main and counter spindle - Also includes chip conveyor and transformer - With documentation Note: The item must be collected by firm appointment between 18 and 26 February 2026, exact date to be agreed in advance. FCA D-78087 Mönchweiler – loaded onto truck