Used Oil Country Lathe for sale (14,312)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions Ledpfx Agjy Sf Azsvern • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Lrsdpfx Agszfguiovsn Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Ledjy Shyiopfx Agvsrn

Condition: used, Year of construction: 2007, - Brand : Oil & Steel / Nissan - Type : Snake 2112 Smart - Year of manufacture: 2007 (first operation 2012) - Hours: 4.546 hours - Odometer: 79,776 km. - Weight: 3250 kg. - Drive: Diesel - Trailer: 2000 kg - Working height: 21 meters - Lateral reach: 12.8 meters Lrodpfxsy Umfco Agvsn - Lifting capacity: 200 kg. - Narrow + Wide stamping - Dutch license plate : 9-VXV-31 - APK: 22-10-2026 - Export license plate possible - Safety inspection possible - Aerial work platform book available - Maintenance history available - CE document available - Video on our website - Trade-in and transport possible *Type: Snake 2112 Smart * Construction year: 2007 (first commissioned 2012) * Hours: 4546 uur * Km. position: 79776 km. * Weight: 3250 kg. * Drive: Diesel * Lateral reach: 12.8 meters * Lifting capacity: 200 kg. * Dutch license plate: 9-VXV-31 * APK: 22-10-2026 * Working height: 21 meters

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. Lredorivv Eepfx Agvon At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Ljdpey D E Riefx Agvjrn Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: good (used), Toolholders bought in company where used for Biglia machine Ledpfsyuyhiex Agvorn

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pins ØShank Pin Distance Price: OQ70 60/60 280 330 €3,000.00 OQ80 90/90 345 510 €3,500.00 OQ80 90/90 353 515 €3,500.00 QO80 90/90 355 510 €3,500.00 OQ80 100/90 387 530 €3,500.00 OQ80 100/100 420 610 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 90/90 350 500 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 80/80 310 475 €3,500.00 OQ90 110/100 440 595 €18,000.00 OQ90 without mount €15,000.00 OQ90 110/110 470 590 €18,000.00 Verachtert Pins Ø Shank Pin Distance CW40 80/80 310 445 €2,000.00 Lehnhoff Pins Ø Shank Pin Distance HS21 80/80 465 333 €2,000.00 HS21 80/80 305 475 €2,000.00 Additionally, adapter plates available Liebherr Pins Ø Shank Pin Distance SWA 48 65/65 253 370 €2,000.00 SWA 48 80/70 350 420 €2,000.00 Lredexhdh Sjpfx Agvsn SWA 48 80/80 327 460 €2,000.00

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ Ljdpfx Agex I A Hcjvjrn • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm Lrjdpji Eg Nnsfx Agven -Weight: 30 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor Lredei Eg Ncopfx Agven -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor Lredpfxji Eg Nvj Agven -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Lrjdpfx Ajvmbzqjgvon Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) a current TÜV inspection can also be issued on request. If you have any questions, just call or send an email

Condition: used, functionality: unexamined, Year of construction: 2007, operating hours: 966 h, machine/vehicle number: 172740708, load capacity: 120 kg, mast type: telescopic, lifting height: 14,000 mm, platform width: 1,400 mm, empty load weight: 1,650 kg, transport length: 4,000 mm, transport height: 1,950 mm, construction height: 1,950 mm, next inspection (TÜV): 02/2024, fuel type: diesel, tire condition: 50 %, Tracked lift, tracked articulated work platform Octopussy 14.12 Twin with 120 and 200 kg basket load capacity, switchable, currently without TÜV inspection but operational with diesel engine, fully hydraulic with 2 hydraulic circuits, 4 hydraulic outriggers. Lrsdpfsw Aw Anex Agven

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! Ledpfxjvmbzwo Agvorn The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Lsdsxz Tfajpfx Agvern Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Ledpfx Agsxdmgvevjrn Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Lsdozdqdfspfx Agvsrn Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Lredpfjzdfzaex Agven Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 EQUIPMENT Fixed steady rest 3-jaw chuck Documentation CE marking

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Ledpfxozc E Dfs Agvern Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Control system: OSP 5000L-G CNC system Data transmission: RS232 Tool turret: 12 positions Power supply: 3 × 400 V Rated machine power: 21 kVA Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7402-09-03006-03, spindle bore: 90 mm, rotational speed (max.): 2,000 rpm, center width: 3,000 mm, center height: 325 mm, controller model: SIEMENS SINUMERIK 810D, TECHNICAL DETAILS Swinging diameter over bed: 630 mm Swinging diameter over carriage: 380 mm Center height: 325 mm Distance between centers: 3,000 mm Carriage overhang on bed: 700 mm Bed width: 520 mm Longitudinal travel X-axis: 355 mm Longitudinal travel Z-axis: 3,000 mm Tailstock spindle diameter: 100 mm Tailstock spindle travel: 180 mm Maximum workpiece weight between centers: 3,000 kg Ledpfjzc Hmnex Agvern Maximum workpiece weight in cantilever mode: 500 kg Spindle bore: 90 mm Spindle mounting: DIN 55027/8 Spindle taper: 120 mm Front spindle bearing: 130 mm Main drive power 100% ED / 40% ED: 12 / 18.5 kW Maximum torque: 2,400 Nm Speed: 2–2000 rpm Speed ranges: 3 Range 1: 2–220 rpm Range 2: 50–660 rpm Range 3: 100–2000 rpm Speed control: 50–120 % MACHINE DETAILS Control system: SIEMENS SINUMERIK 810D Load display on screen: 0–140 % Main drive: 10 kW Power supply: 3 × 400 V / 50 Hz Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 5,600 x 1,950 x 1,850 mm Machine weight: approx. 5,500 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem. Ledpszdd Npofx Agvsrn

Condition: ready for operation (used), functionality: fully functional, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Turning diameter max.: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Torque max.: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Lrodszgufrspfx Agvon Sub spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Torque max.: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Angular positioning of the sub spindle Synchronization of main and sub spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Lsdpfxjzgt U Ss Agvsrn Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Lrsdpjzgt Urjfx Agven Distance between centers: 1,200 mm Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Chuck size: 250 mm Axes: X, Z MACHINE DETAILS Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws