Used Lathe Machine for sale (84,038)

Condition: used, Polish Lathe / Polishing Machine Ledpjxuf Hvofx Agzota Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm Ltedpfx Aeqwlmqegzsa revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings Ltedpfxotpnddo Agzja - Quill travel 150 mm (with scale) - Total length 1,780 mm - Weight 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Copy stroke max. 250 mm; Copy diameter max. 260 mm; Spindle speed min. 400 rpm; Lodpfev Nxdnjx Agzota Spindle speed max. 3,200 rpm; Speed settings 8; Main motor 1.4 kW; Many accessories; You can call or write to us. We speak and write German and Russian. You can also send us messages in English.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 112902, Title: Intorex CNI 1500 CNC Control Lathe - 2015 Model Description: Experience precision engineering at its finest with the Intorex CNI 1500 CNC Control Lathe, a powerhouse of machining. Manufactured in 2015, this machine embodies reliability, accuracy, and efficiency, making it an ideal addition to any workshop or manufacturing facility. Key Features: Year of Manufacture: 2015 Ltedpfxer Tiuko Agzsa Brand: Intorex Model: CNI 1500 Control: CNC Control Max. Turning Diameter: 300mm Diameter Max. Turning Length: 1500mm Inc. Drawing and programming Software IntorEDIT (easy to use) Additional Features: Adjustable Tailstock (12 & 18mm), Round steady (90mm Dia & 140mm Dia), 2 pneumatic centerers to facilitate the loading of the pieces Applications: Ideal for precision turning operations in Woodworking / Joinery Reason for Selling: Upgrading to newer equipment. Comes with rolling cabinet for accessories and tooling

Condition: repair required (used), Year of construction: 2001, Calpe TH-3-1200-CNC Ltedjf Ezgqepfx Agzsa CNC controlled wood lathe Machines 3 workpieces simultaneously Technical specifications Maximum working length 1200 mm Maximum square 100×100 mm 3 workpieces machined simultaneously programmable template Designed for high productivity. Control Incomplete. The machine does not have a controller which is responsible for the programming and operation of the machine. Possibility to install a new controller to program the machine, paid service. Price to be negotiated.

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition Ltjdpfx Agsdz Srkjzja

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm Lsdpfx Agjwk Iq Eozota - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: like new (used), Year of construction: 2025, functionality: fully functional, NOW: Clearance sale of lathes (demonstration models, showroom units, and workshop machines). We are selling various lathes with low operating hours that were used during our demo days or in one of our woodturning course rooms. You will receive a full warranty. All lathes come equipped with a drive center, live center, and faceplate (or other basic equipment and operating instructions). Detailed information and technical data for each machine type can be found on our website! Shipping available upon request! Available machines: * Drechselmeister Miditec FU 175 SET € 999 incl. VAT (€ 832.50 excl. VAT) * Drechselmeister MIDI 1 bench lathe € 880 incl. VAT (€ 733.33 excl. VAT) Ltodpfx Agowyn Dkozoa * Drechselmeister MIDI 2 PLUS bench lathe € 1,099 incl. VAT (€ 915.83 excl. VAT) * Drechselmeister TWISTER FU-200 lathe € 2,293 incl. VAT (€ 1,910.83 excl. VAT) * Drechselmeister STRATOS FU-230 lathe € 2,633 incl. VAT (€ 2,194.17 excl. VAT) * Drechselmeister STRATOS FU-230 LV lathe € 2,845 incl. VAT (€ 2,370.83 excl. VAT) * Drechselmeister TWISTER XL lathe € 3,398 incl. VAT (€ 2,831.67 excl. VAT) * Drechselmeister STRATOS XL lathe € 4,248 incl. VAT (€ 3,540 excl. VAT) * Teknatool NOVA NEBULA 230 DVR lathe € 2,590 incl. VAT (€ 2,158.33 excl. VAT) * Teknatool NOVA Galaxy DVR lathe € 1,990 incl. VAT (€ 1,658.33 excl. VAT) * RECORD POWER lathe DML 250 € 280 incl. VAT (€ 233.33 excl. VAT) * RECORD POWER lathe CORONET ENVOY € 1,799 incl. VAT (€ 1,499.17 excl. VAT) * RECORD POWER lathe Coronet Herald SET € 1,079 incl. VAT (€ 899.17 excl. VAT) * HAGER lathe STAR 200 MAX SET € 2,890 incl. VAT (€ 2,408.33 excl. VAT) * HAGER lathe HDG 250L € 3,990 incl. VAT (€ 3,325 excl. VAT) * HAGER lathe HDE300 € 4,680 incl. VAT (€ 3,900 excl. VAT) The machines are located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Related terms: lathe, turning machine, bench lathe, woodturning lathe, woodturning, turning tools, wood turning, machine Reference: R-A0117

Condition: new, Year of construction: 2024, CNC lathe machine TCK 50A500 with slant bed, 12 positions turret, hydraulic chuck and tail-stock, chip conveyor, parts catcher - is perfect machine for your turning operations. You can choose it in standard set or add desired option. We can make it with GSK CNC system, Siemens or Fanuc as option Max. Swing over bed -560mm Max. Swing over bed -260mm Max. disc machining diameter - 400mm Max. turning length - 500mm Spindle end type A2-6 Spindle through hole diameter -66mm Bar diameter -55mm Hydraulic chuck -10 inches Spindle limit speed -3000rpm Tail-stock sleeve diameter -70mm Ltsdst Ef I Uopfx Agzoa Tail-stock sleeve inner hole taper Mohs 5# Tail-stock sleeve stroke -80mm Knife square size -25mm Main motor power -11kW Machine net weight -3000 kg Dimensions (L×W×H) - 2700*2000*2000 mm Please contact us for more details. There are other CNC slant bed lathe machine, CNC flat bed lathe, milling machines,8 CNC milling machines, CNC turning and milling centers, band saws, CNC saws available per request

Condition: new, Turn & milling combination WMP290V-F with frequency controller TURNING Center distance ----- 700 mm Center height ----- 140 mm Turning diameter over bed ----- 280 mm Turning diameter over slide ----- 165 mm Main spindle passage ----- 38 mm Main shaft take-up ----- MK5 Ljdpjpz I Iqefx Agzota Lathe speed ----- 70-1800 stepless rpm Loose head ----- MK3 Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head loading ----- 185 mm Milling machine speed ----- 50-2250 stepless rpm Spindle drive of milling machine ----- MK2 Milling head rotatable ----- +/- 90 Pinole stroke milling spindle ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ltodpfeh Axrysx Agzea On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 3,000 mm, quill diameter: 90 mm, total length: 4,900 mm, total width: 1,420 mm, total height: 1,590 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 18 rpm, overall weight: 3,700 kg, workpiece weight (max.): 1,500 kg, spindle mount: MK 6, The universal lathe FAT TUR 630M/3M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW Ljdpsd Eaa Ejfx Agzota - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), COURSE ROOM MACHINE For sale is a used Killinger KM 1450 SE wood lathe with a center height of 200 mm. The machine is in excellent condition and has been reconditioned and inspected by our technical staff. (Fully functional) Technical specifications: - Center height: 200 mm - Distance between centers: 720 mm - Spindle thread: M33 x 3.5 with MK2 taper - Speeds: 40 - 3,025 rpm; 40 - 850 rpm; 40 - 1,650 rpm - Indexing feature: 36-step - Motor: 1.5 kW (230V) with high-quality frequency inverter Lsdpfx Agew S T Iwezota - Weight: approx. 180 kg The lathe is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning chisel, wood turning, turning, machine Reference: KM1450SE

Condition: used, functionality: fully functional, turning diameter: 930 mm, turning diameter over bed slide: 650 mm, turning length: 6,000 mm, total width: 8,500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, under power and can be inspected at any time. Equipment as shown in the photos. Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm Ltjdsv Epkkopfx Agzea - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, DEMONSTRATION MACHINE WOODTURNING DAYS 2025 Ltedpewnqmksfx Agzsa For sale is an as-new HAGER STAR 200 MAX lathe SET with external turning device. The demonstration machine is in very good condition. Technical Data: - Center height 200 mm - Center distance 640 mm (expandable*) - Stepless speed 300 – 2,900 rpm - Hollow spindle D = 15 mm with internal taper MK2 - Tailstock quill travel 100 mm - Motor 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, woodturning lathe, woodturning, turning chisel, woodturning, turning, machine, Hager Reference: R-A0117 44051+44033

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, total length: 10,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 9,200 kg, The PORĘBA TPK-90/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 8000 mm Ltsdpfjdyvh Nex Agzea - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 10000 mm width: 1800 mm height: 1865 mm total weight: 9200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER STAR 200 MAX lathe with a center distance of 640 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 200 mm - Center distance 640 mm (extendable*) - Stepless speed 300 - 2,900 rpm - Hollow spindle D = 15 mm with inner cone MK2 - Quill travel 100 mm - Motor 1.5 kW / 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Ljdpfx Ajtpnzdjgzjta Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 11,400 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 Ltjdpfxjdy I I Ao Agzoa - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 2130 mm height: 1550 mm total weight: 11400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new TEKNATOOL Nova Nebula 230 DVR wood lathe with a direct drive offering speeds from 50 to 4,000 rpm. The demonstration machine is in original condition, so you receive the full warranty. Technical specifications: - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove - Spindle and tailstock taper: MK2 - Variable speed control (direct drive): 50 – 4,000 rpm - 24-position indexing - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with graduated scale and trapezoidal thread) - Machine weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping by freight forwarder: Austria: € 105.00 incl. VAT Ltjdpfetpph Ssx Agzoa Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, lathe, turning machine, turning bench, turning, turning tools, woodturning, machine Reference: R-A0117

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 Ltodpfx Agofhk Inszea - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, with extensive equipment as shown in the photos. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Ledpov Epk Djfx Agzeta Extensive equipment as shown in the photos: 1 x 4-jaw chuck 2 x steady rest 1 x travelling steady

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 3,000 mm, The PORĘBA TPK-80/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 3000 mm - turning diameter over bed: 800 mm - turning diameter over support: 530 mm - turning diameter in bridge recess: 1080 mm - power on compound slide - spindle bore diameter: 95 mm Ltsdpfx Aefknw Rsgzoa - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 5000 mm width: 1800 mm height: 1800 mm total weight: 6200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg Ltsdpfx Agoiwa Iaezsa - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Year of construction: 2024, condition: reconditioned (used), functionality: fully functional, This universal lathe machine can be generally overhauled and modernized and will be available within 3 to 3,5 months, starting from the customer´s order. We give a full 12 months warranty for this machine (spare parts, material, electronic cabinet). Lodpfxskh D Txe Agzsta Details of the overhaul and detailed specs see attached PDF-files.