Used Line Reactor for sale (15,821)

Condition: good (used), Line filter, power line filter, three-phase filter, three-phase line filter, filter module -Manufacturer: Siemens, filter module -Type: 6 SN 1111-OAA01-1BAO -Voltage: 440/250 V/3 x 16 A/50-60 Hz -Dimensions: 190/155/H80 mm Nodpfjf Dq U Hex Agzswr -Weight: 3.8 kg

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Dishwasher pot washer Model: S Line 1715 AP Quick Ready System Soft-touch operation with color display Universal dishwasher 3 liters of fresh water consumption Nwedjm Tr Hdjpfx Agzjr 9 wash programs (2 to 12 min) Rinse aid and detergent dosing pump Basket dimensions: 550 x 610 x 850 mm, WxDx insertion height DGUV V3 tested drain/drain pump Connection: 400 V, 10.5 kW, 32A-CEE plug Dimensions: 719 x 802 x 1930 mm, WxDxH NEW machine with 12 months warranty and 12 months on parts Accessories included: 1 universal basket inlet and outlet hoses We have a TOP selection of bakery machines!

Condition: ready for operation (used), gebruiksonderdelen: diameter: 180 mm Nedpfx Agox Imm Tozowr diameter: 260 mm

Condition: ready for operation (used), Rondo smart line with smart feeder smart line and jumbolino line for sheet and cut of dough or pastry good ex bakery condition with new belts Nodpokw Ranjfx Agzswr

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min Nodpfox I I Ncox Agzswr (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW Nsdpfx Agex N Iclszowr - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW Nsdpfjxwytisx Agzjwr 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), OptiAir unit to extract dust when predusting food products with fine flour. Nwodpfx Aex Hamqjgzer

Condition: ready for operation (used), Decoiling and rollforming line for manufacturing roof sandwich panels Max width of finished panel: 1000 mm PRODUCTION SPEED 7,30 meter per minute UP Floor Nwedpjx Imndofx Agzor 1 - Stam decoiler of 12 ton 2 - Memco embosser 3 - In-line profiling machine 4 - Sheet preheating DOWN Floor 1 - Stam decoiler of 12 ton 2 - Roll forming machine 3 - Sawing machine 4 - Pick and place for the insertion of sheets in the Stam production line, max panel length 18 meter 5 - Automatic machine for the overlapping of sheets 6 - Glue device 7 - Sheet preheating room 8 - PIR foaming gantry 9 - PIR dosing bench 10 - Siempelkamp 25 meter belt press 11 - Panels Cutting Machine (Flying Saw) 12 - Stacking unit for max panellength 16 meter 13 - Horizontal packing unit Total length of the line from decoiler to stacking is 90 meters. The packing unit is located next to the stacking unit, panels are moved from the stacking unit with side conveyors.

Year of construction: 2020, condition: ready for operation (used), Additional Equipment Drive, opening, and drawer motors Servo motors for block positioning High-power hydraulic system Nwjdpjx H U Ayefx Agzsr This MAQUINARIA LDM VPS 2103 was manufactured in 2020. An industrial automated system for wood production, it features a hydraulic nailing system, chain-driven pallet transport, and servo motors for precise block positioning. It operates on 220V or 380V and handles pallet widths from 800 mm to 1500 mm. Safety certified under EN 12100 standards. Contact us for more information about this machine. Application Types Complete Production

Condition: used, Production line consisting of: Njdpfxsx I I Ilj Agzewr (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off/saw combination Technical details: Weight approx. 1.8 t, with two (2) IDE chip extraction systems ME AS 58 (1) Tilting table Technical details: Length approx. 6 m, weight approx. 300 kg

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Nedpovvi Tyefx Agzewr Storage location: Customer

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW - Right side: 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm - Dimensions (L/W/H): 1870/2230/1320 mm Nwedsxxxbnjpfx Agzer DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: used, tank capacity: 6,510 l, GENERAL INFORMATION Nwodpfjxqbaqsx Agzjr Design: suspended Remarks: Several connections were modified by the previous operator (not listed in TÜV documents); vessel mounted on 3 feet made of Fe (not on 4 as shown in the drawings); heating coil in cylinder located only in the lower cylinder area; insulation jacket has sheet metal cut-outs and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/Cooling: available Insulation: available Power: 5.5 kW Max. allowable operating temperature: 165 °C Max. allowable operating pressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: blade agitator Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 litres Double jacket volume: 34.0 litres Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Last application: ethanol VESSEL Max. allowable operating temperature: 165 °C Number of legs: 3 HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in upper head (DN 600) Outlet: flange DN65 Note: light residues AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 V Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator position: centrally located in upper head Upper head wall thickness: 8.0 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Nsdpjx I Itbefx Agzswr Technical details: Length approx. 6,000 mm

Condition: used, Year of construction: 2005, Unimat 23 E: Working width (with cutter circle 140 mm): 20 – 230 mm. Working height (with cutter circle 163 mm): 8 - 120 mm. 1st spindle lower horizontal spindle: 7.5 kW, 2nd spindle right vertical spindle: 11 kW (shared with left vertical spindle), 3rd spindle left vertical spindle, 4th spindle upper horizontal spindle: 7.5 kW. Each spindle diameter: 50 mm. Each spindle speed: 8,000 rpm. Feed system: 4 kW. Mechanical feed, steplessly adjustable: 5-24 m/min. Working table: 2.5 m long (incl. joining fence). Uniplan 23: Max. working width: 230 mm. Working height min.: 15 mm / max.: 120 mm. Feed: 3 kW. Horizontal spindles each 5.5 kW. Feed speed, steplessly adjustable: 6 – 36 m/min. Spindle speed: 6000 rpm. Spindle diameter: 50 mm. Tool clamping length: 240 mm. Max. tool diameter: 163 mm. Fixed lower chip removal: 0.5 mm. Short piece package for min. workpiece length: 280 mm. Mechanical spindle brakes up to 7.5 kW. Feed braking system up to 5.5 kW. 1st feed roller synchronized with photocell. Spindle speed 7200 rpm, incl. motor power 7.5 kW. Improved noise insulation of the full safety enclosure. Location: Customer Nwodpfx Aevvkcisgzer

Condition: used, tank capacity: 1,860 l, GENERAL Design: suspended Remarks: 2 support feet made of V2A stainless steel (support surface reversed; see photos); outlet with flanged reducer Speed: 177 rpm Inner diameter: 990 mm Overall length: 3,700 mm Heating/cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: propeller Support feet design: support feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,860 liters Double jacket volume: 24.0 liters Cylinder wall thickness: 5.2 mm Nwedoxqa Tcepfx Agzsr Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: slight residue/adhesion present MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.9 mm Agitator arrangement: eccentric in top cover Top cover wall thickness: 4.0 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Nwodpfx Agex I Inxezsr Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, tank capacity: 1,969 l, GENERAL Design: suspended Remarks: 2 support brackets made of V2A (support surface reversed; see photos) Rotational speed: 571 rpm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Overall height: 3,800 mm Heating/Cooling: available Nsdpfexqa Sljx Agzowr Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft sealing: mechanical seal without thermosiphon vessel Agitator: propeller Pedestal type: bracket Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous use: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: DN80 flange Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm Agitator arrangement: eccentric in the top head Agitator equipment: technical documentation for agitator available

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m Nsdpfxox I Ig Uj Agzswr (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, tank capacity: 7,385 l, GENERAL INFORMATION Equipment: Crane lugs Design: Hanging Remarks: Manhole DN 350/450; additional technical documentation available External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 4,950 mm Heating/cooling: available Power: 3.07 - 11.2 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: Beam-type agitator Support design: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 7,385 liters Double jacket volume: 735.0 liters Double jacket material: Steel Product contact material: Enamel Condition: Used Last application: Pharmaceutical chemicals Nodpfx Agsxqa Rhezswr TANK Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Jacketed bottom: Double jacket EQUIPMENT Manhole/dome: On top head Outlet: available Outlet: 150 mm MATERIAL SPECIFICATION Base material: Steel Cylinder material: Steel AGITATOR 1 Voltage: 380 Volt Agitator position: Centered in top head Agitator components: Agitator shaft and blades made of stainless steel

Condition: used, tank capacity: 8,250 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; sheet cuts in the insulation jacket; original manway cover is no longer present (a similar manway cover is supplied loose, see photos); at one connection, the enamel layer is slightly chipped in places (see photos) External diameter: 2,310 mm Internal diameter: 2,000 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 5,250 mm Heating/Cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: anchor agitator Support type: ring Location: Bremen Technical documentation: drawings, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Nedpfx Agjxqa Rbozswr Volume: 8,250 litres Double jacket volume: 685.0 litres Double jacket material: steel Product-contacting material: enamel Condition: used Cylindrical height: 2,100 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base temperature control: double jacket INSULATION Insulation jacket material: aluminium FITTINGS Manway / dome: on top head (DN 500) Outlet: 150 mm MATERIAL SPECIFICATION Head material: steel Cylinder material: steel AGITATOR 1 Voltage: 400 Volt Agitator mounting: central in the top head

Condition: used, tank capacity: 10,875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; In some areas, the flanges of the top head were welded on the inside with a stainless steel sheet by the previous operator (in some of these sheets, an opening has been cut – see photos); Manhole diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Standing form: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double-jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double-jacket material: V2A 1.4301 (AISI 304) Product-contact surface material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,200 mm Previous application: Adhesives industry VESSEL Max. permissible operating temperature: 200 °C Nwedpsxqa Nwsfx Agzer HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in top head Outlet: present Note: minor residues, manhole cover missing Outlet: 100 mm MATERIAL SPECIFICATION Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Agitator arrangement: central in top head Top head wall thickness: 14 mm

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manhole diameter approx. 480 mm; total height including agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/cooling: available Power: 5 / 15 kW Max. permitted operating temperature: 220 °C Max. permitted operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: frame blade agitator Base shape: ring Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Double-jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contacting material: V2A 1.4541 (AISI 321) Nedpexqavdefx Agzowr Condition: used Last application: chemical industry VESSEL Max. permitted operating temperature: 200 °C HEATING / COOLING JACKET Max. permitted operating vacuum: 1.0 bar (negative pressure) Bottom temperature control: half-pipe coil EQUIPMENT Manhole / access hatch: in top head Note: motor missing, manhole cover plated Outlet: 105 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Flange material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm AGITATOR 1 Agitator positioning: centered in top head Agitator equipment: agitator element: frame blade agitator; agitator motor missing but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal tank with signs of corrosion (see photos); overall height incl. agitator gearbox (approx. 3400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Overall height: 4,950 mm Heating/Cooling: present Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable / hinged top head Agitator: Beam agitator Support type: Ring Location: Bremen Technical documents: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Volume double jacket: 313.0 liters Nwodpfxoxqau Ts Agzsr Cylinder wall thickness: 8 mm Product-contacting material: Stainless steel V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Previous use: Chemicals TANK Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable negative operating pressure: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top head Notes: Motor missing, manway cover missing Outlet: 100 mm MATERIAL SPECIFICATION Temperature control system material: Stainless steel V4A 1.4571 (AISI316) Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator equipment: Agitator type: Frame blade agitator; agitator motor missing but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm