Used Magnetic Plate for sale (13,649)

Condition: excellent (used), overall weight: 14,000 kg, total height: 455 mm, total length: 5,500 mm, total width: 2,420 mm, T slotted bed plate STOLLE - DT-4/2 T slotted cast iron floorplate 4000 x 2420 x 455 mm Floorplate Length: 5500mm Floorplate Width: 2420mm Height: 455mm No. Of T-slots: 6 Distance from T to T-slot / Jump:400mm Ppjdpfezc Ibmex Agkou T -slot size: 42mm Weight a plate approx.: 14000kg Number of matching pieces: 2 Length: 5500mm Width: 2420mm Height: 455mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Ppodpfx Agezc Rv Tskou Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit Ppodpjy E N Hdsfx Agkou

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Pedpfoxau D Ijx Agkjpu Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW

Year of construction: 2012, condition: good (used), Ficep Gemini HD36 GANTRY PLATE PROCESSING CENTRE, AUTOMATIC CNC DRILLING, MILLING AND THERMAL CUTTING SYSTEM, serial no. 33275, year of manufacture 2012, 127mm max. thickness, 520N/mm² tensile strength, with fitted eight head tool holder, Ppedpfx Asivfc Rjgkou Hypertherm HyPerformance plasma HPR260XD power supply unit, galvanised steel ducting, Autchazioni AVV.2KW fume extraction unit, approx. 3.5m x 1.75m x 3.9m high, machine bed approx. 9.4m x 3.8m wide

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information Pedpfxevkphgs Agkopu TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Ppsdpfx Aewphgdegkeu Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Ppedpfx Agjuipu Eskou Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: good (used), Year of construction: 2004, overall weight: 21 kg, T slotted bed plate BWF - RK-4 Ppjdjzcu I Tjpfx Agksu MACH-ID 8883 Make: BWF Type: RK-4 Year: 2004 Length:275mm Width:180mm Height:115mm Weight:21kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 90 engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good / well-maintained condition (!!) Current list price approx. 80.000 euros Features: - Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model "SC 90" * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulic hold-down devices - Front finger guard - Ball bearings in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms Ppedpozczgcsfx Agkou - 1x freely movable foot switch - Rear safety guard (no light barrier) - Operating instructions in German (PDF)

Condition: used, This listing is for Maxwell 16 Promega Magnetic Particle Processor MX3031 The unit is in full working condition and ready for immediate use Automated magnetic particle processor designed for efficient, hands-free extraction of nucleic acids and proteins. Processes up to 16 samples simultaneously using pre-filled reagent cartridges to ensure consistent yields and high-purity results for downstream laboratory applications. [[1]()] Transparency Report and Technical Audit: Ppedozgf Spepfx Agkou Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: excellent (used), Year of construction: 1996, overall weight: 4,200 kg, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, plate height: 350 mm, plate width: 1,750 mm, groove spacing: 250 mm, T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 T slotted bed plate STOLLE - DT MACH-ID 9373 Ppsdpfjzcn Iyox Agksu Make: STOLLE Type: DT Year: 1996 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 Pjdozcnuyjpfx Agkepu MACH-ID 9613 Make: Davi Promau Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values Pjdpfx Aezcqy Sogkepu - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: used, Year of construction: 1989, sheet width 2500 mm plate thickness 12,5 mm Ppedpfx Ast Hwr Iegksu distance between columns mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm Psdjv Tzphjpfx Agkopu - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm Ppedpfx Agoqva Rzskju engine output 7,5 kW Control eView weight of the machine ca. 7,2 t CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Condition: used, sheet width 2000 mm Psdpsxfwdzsfx Agkopu plate thickness 3 mm rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Year of construction: 2002, condition: used, width 395 mm length 2960 mm output height 130 mm efective widths 385 mm Ppodped Srxzjfx Agkou Pole center 400 mm drive motor Drehstrom

Condition: used, Plate assembly, clamping plate with T-slots 8000 x 2100 mm, 2-piece Clamping surface: Length: 8000 x Width 2100 mm Plate thickness: 360 mm - Consisting of 2 clamping plates with 7 T-slots each (Length 4000 x Width 2100 x Plate thickness 360 mm) Transport dimensions: 2 plates stacked on top of each other Plate assembly: Length 4000 mm x Width 2100 mm x Height approx. 900 mm Transport weight of plate assembly: approx. 14 tons Good condition Podpfjzc Nt Dox Agkepu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Ppsdezcpu Uepfx Agkju Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Width: 1000 mm Pedpfx Aey Iakfsgkspu Depth: 500 mm 10 transverse slots 3 longitudinal slots First-class surface finish

Condition: good (used), functionality: fully functional, Year of construction: 2012, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 160 mm, roller diameter: 180 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, total length: 4,000 mm, total width: 1,100 mm, total height: 1,300 mm, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Plate bending roll 2000 X 8/6 mm year 2012 Biko model B3-2016 PYRAMID LINEAR GUIDEWAYS DUAL PRE-PINCH 3-ROLL Bending capacity -Plate width 2000 mm Psdpfxszff Uus Agkepu -Rolling plate thickness 8 mm -Prebend thickness: 6 mm Rolls dimensions: Useful length 2050 mm top roll D 180 mm side rolls D 160 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls Conical bending hydraulic attachment Re-rolling system welded shells rounding. Opening hydraulic front drop-end Extended shafts front side for use as profile bender. Electric 3 phase 400/50 Vac, power 7,5 Hp. Digital position readouts of the bending rolls.

Condition: ready for operation (used), 1 x Davi round edge rolling machine / plate rolling machine / iron four-roll bending machine / 4-roll machine (English: Davi 4-roller bending machine) 4 rolls, 3.6 m x 95 mm thick. Video available via WhatsApp/Messenger/Viber. Pjdpfxjymnzbs Agkepu Inspection welcome near D-24983 Handewitt. Year of manufacture 2009 - in operation since 2010. More information available upon request.

Condition: as good as new (ex-display), For sale: adapter plate, top plate, Lehnhoff VL 210, 250, with Atlas Copco/Epiroc MB1200 mounting pattern. Ppsdpfx Agozhhdwokeu 12 holes, diameter 33 mm. Mounting pattern in the attachment. Connections for supply and return lines, leak oil. Suitable for separators, milling machines, hammers, etc. The top plate has not yet been used in operation. It was only mounted once on a separator for a trade show.