Used Maho 800 for sale (435)

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Clamping bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Crodexz Rdaepfx Ab Uea Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Technical data subject to change! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m Crsdpfx Aboikbtno Uja CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: reconditioned (used), Year of construction: 2011, CNC Vertical Machining Center DECKEL MAHO DMF 260 linear, NEW DMG Design With Siemens 840 D path control with Shop Mill Year of manufacture: 2011 Travel distances: X 2600 mm Y 700 mm Z 700 mm Spindle speed range: 20 – 14,000 rpm, stepless (SK 40) Including the following accessories: - Rigid angle table, 2920 mm x 750 mm clamping area - Controlled swivel milling head (B axis) - NC rotary table by Hofmann with tailstock, center height: 200 mm - Vertical tool changer with 40 magazine slots (SK 40) - Electronic handwheel - Full enclosure with sliding doors and interior lighting - Coolant high pressure system, 40 bar - Chip conveyor - Operating modes 3 + 4 - 2 x Rotoclear (rotating viewing window) - Partition wall - Coolant system - RITTAL control cabinet cooler - 4 height-adjustable machine feet Cedpfxeyvvlns Ab Uera - Operating manual

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Crjdpfxjyuzg Hj Ab Uoa Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: excellent (used), Year of construction: 1992, 1 pre-owned, very well-maintained universal tool milling machine with 3-axis digital readout, brand HEIDENHAIN, and stepless speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992! Working area Table size: 1250 x 740 mm Travel ranges X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (transverse): 750 mm Manual cross traverse of the table: 275 mm Working spindle Tool holder (DIN 2079): ISO 40 Quill stroke of the vertical spindle: 125 mm Speeds and feeds Spindle speed range: 32 – 1600 rpm, steplessly adjustable Feed range X + Z axis: 10 – 500 mm/min Rapid traverse X + Z axis: 1.4 m/min Feed range Y axis: 5 – 250 mm/min Rapid traverse Y axis: 0.7 m/min Drive power: 5.5 kW Resolution of linear measuring systems: 0.01 mm Crsdpfx Abeygctrs Uoa Weight and space requirement Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital display, brand HEIDENHAIN • Tool holder ISO 40, DIN 2079 • Universal clamping table (rotatable, tiltable, and swivelable) • Stepless speed adjustment via MITSUBISHI A 700 inverter (converted in 2006 with new control cabinet) • Spindle head with horizontal spindle • Central lubrication • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Crodpfx Aoytpy Eeb Uea

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits • Table size: 400 x 400 mm • Tool magazine: 60 positions Extra Information Machine still under power Dimensions Csdjytumdopfx Ab Usra Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2009, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 25 / 35 kW max. Torque 130 / 87 Nm tool taper HSK A63 DIN 69893 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load 1.500 kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 rotatable C: 360 ° number of toolpositions 30 pos. tool taper HSK A63 DIN 69893 max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Crsdpfxeyhhtgo Ab Uja max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 70 kVA weight of the machine ca. 13,0 t dimensions of the machine ca. 7,0 x 6,2 x 2,8 m 5-Axis CNC - Travel Column Milling Machine DECKEL MAHO - DMF 180 New Design - Swivel-Head (B-Axis) - integrated rotary-table - internal coolant system - Operating-Hours: Spindle-Runtime: ca. 10.000h

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1539000771E, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, workpiece weight (max.): 1,000 kg, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,039 h, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Under power 24000 EUR Crodpfjyf E Shsx Ab Uja

Condition: not inspected (used), Year of construction: 2016, operating hours: 21,228 h, machine/vehicle number: 127300000073, travel distance X-axis: 2,100 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,250 mm, overall weight: 46,000 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 80 bar, 5-axis CNC universal machining center with controlled B-axis and NC rotary table (C-axis). Large working area approx. 2,100 x 2,100 x 1,250 mm. Csdoyxmicepfx Ab Usra Equipped with a powerful SK50 spindle (52 kW, 430 Nm, up to 12,000 rpm) and internal coolant supply up to 80 bar. Tool changer with 60/63 positions (chain/wheel magazine, double gripper). Very well equipped with Blum Laser, 3D quickSET, ACC, and MPC. Including chip conveyor, oil mist separator, and coolant system. Control ON: 47,888 h – Operating hours: 21,228 h

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Direct from toolmaking department: DECKEL MAHO DMU 50 – year of manufacture 2005 – Heidenhain iTNC 530 – 3-axis machine – travels X500 x Y450 x Z400 – SK40 – 8000 rpm – without WW – low operating hours, used only as a standby machine, extremely stable and in top condition, also very well suited as a training machine, minimal space required: 1.70 m wide x 2.00 m deep, for sale only due to lack of space, machining test and geometric measurement welcome. Ex works, free loading. Crjdpfxoyxy Rte Ab Uja

Condition: used, operating hours: 22,802 h, functionality: unexamined, machine/vehicle number: 71401454, controller model: MillPlus, MACHINE DETAILS Crodpfx Aoyx U Nqsb Usa Control: MillPlus Electrical data Voltage: 400 V Frequency: 50 Hz Operating hours Operating hours: 37,732 h Spindle hours: 22,802 h

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Csdpfxeyk S Hps Ab Uera Manufacturer: DECKEL MAHO Model: DMU 70VL Year of manufacture: 2001

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D Credpfx Abjyf Hyme Uea - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Very nice Deckel Maho FP1 From the latest model! Comes from a toolmaking workshop. UNIQUE MACHINE With feed on the Y-axis. Credsywlakjpfx Ab Usa

Condition: used, Year of construction: 1993, Table size: 800x400 mm Cedpewtdv Aefx Ab Uera Including accessories, various holders

Condition: repair required (used), Maho MH 900 C without housing Control: CNC 432 (V9) - working range X/Y/Z: 1000mm/500mm/650mm - Rigid angle table: 1150mm x 650mm Credpfofgg Aaex Ab Uea - Maximum table load: 900 Kg - Spindle mounting: SK50 - Speed: 40 - 1600 rpm - Feed rate: 5 - 2.000mm/min - Rapid traverse: 6 m/min - Space requirement: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes Crsdpfx Asyq Rpcsb Uoa X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 132612 Spindle Working: 68009 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: like new (used), Year of construction: 2006, operating hours: 51,775 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 4,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 7,700 mm, table length: 1,500 mm, overall weight: 35,000 kg, spindle speed (min.): 10,000 rpm, Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Cjdpfoyq Rm Iex Ab Uera Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Machine running times Under power: 98398 Spindle Working: 51775 Rated power kVA: 96.2 Basic machine dimensions / weight Length mm: 7500 Width mm: 7700 Height mm: 3500 Weight kg: 35000

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof • New Spindle Bearings Machine Benefits Technical Machine Benefits Crjdpoyrd Hwefx Ab Usa • Tool mountings: sk 40 Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Credpfx Abjx D Epcj Uja • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. Codpfox D E Hhsx Ab Uora • ATC capacity: 30 tools Additional equipment • Paper band filter (coolant filtration) • Probe (needs service; communication error) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Crsdpfx Aox Nr Tueb Uoa Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,800 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 5, This 5-axis DECKEL MAHO DMP60S was manufactured in 2003, featuring a vertical machining center with X, Y, Z travels of 760 mm, 460 mm, and 560 mm respectively. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine. • Axes: A-axis NC rotary axis, B-axis NC swivel milling head, V-axis (6th-side machining) Codjyglqtspfx Ab Uora • Tool magazine: 60 positions, HSK-A 63 • Coolant: internal coolant supply Additional equipment • Chip conveyor • Tailstock • Bar feeder

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 eVolution was manufactured in 2002. Ideal for complex machining tasks, this vertical machining center ensures precision and versatility in a compact footprint. Consider the opportunity to buy this DECKEL MAHO DMU 50 eVolution vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • This summary includes only the relevant information as per the provided details and instructions. Extra Information Crodpfxeyaimxo Ab Usa Machine still under power