Used Mazak Qt 10 for sale (320)

Condition: excellent (used), Year of construction: 2015, feed length X-axis: 190 mm, feed length Z-axis: 515 mm, MAZAK QT SMART 100M (400U) C-axis driven tooling Year of manufacture: 2015 Control system: Mazatrol Smart Chuck size: 6 inches Cedpfx Ajz E Ryyscperh Maximum spindle speed: 6000 rpm Spindle bore: 45 mm Maximum turning diameter: 280 mm Z-axis travel: 515 mm X-axis travel: 190 mm Programmable tailstock Tool probe Coolant tank with pump (no chip conveyor) Documentation 4 driven tool holders (3 angled, 1 straight) 10 standard tool holders MACHINE CONDITION: IDEAL - only 1000 operating hours.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Cjdpfx Ajznmbuecperh

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Crodozzd Rtopfx Acpeh Used machine – sold without warranty.

Condition: excellent (used), Year of construction: 2007, 2-axis CNC lathe MAZAK QTN 100II Mazatrol Matrix control Collet chuck Spindle bore 45mm Turning length 310mm Turning diameter 280mm X-axis travel 190mm Z-axis travel 330mm Csdpfjyvzwvsx Acpsrh Spindle speed max. 6000 rpm Turret with 12 positions -Tool probe -Tailstock -Parts catcher -Interface for bar feeder Included with the machine: -Mayfran chip conveyor with coolant tank and pump -Documentation

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach Cjdpfoynbd Eex Acpsrh turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: used, Year of construction: 2003, Turning length 1000 mm Credpfox N A I Nex Acpsh Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders

Condition: repair required (used), functionality: not functional, cnc lathe Crjdpfxsumlwxj Acpeh

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 Csdpfoyalpcjx Acperh • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Year of construction: 2005, condition: good (used), functionality: fully functional, INTEGREX E-1550 V/10 2P MACHINE AVAILABLE FROM DECEMBER, CURRENTLY VIEWABLE IN PRODUCTION. Mazatrol Fusion 640M Pro control Table dimensions (without pallet/plate) 1000 x 1000 mm Turning diameter Ø 2,000 mm Maximum machining diameter Ø 2,000 mm Maximum workpiece height 1,440 mm (with 1000 x 1000 mm pallet) Maximum workpiece weight (including pallet) 5,000 kg Crsdjz H Axkspfx Acpeh Milling spindle power (30 min. rated / 100% continuous duty) 37/30 kW Maximum torque 458 Nm Milling spindle speed 35 / 10,000 rpm Tool clamping, B-axis indexing X-axis travel 1,875 mm Y-axis travel 1,550 mm Z-axis travel 1,345 mm B-axis tilting angle 150° (-30° to +120°) C-axis rotation (continuous) 360° Rapid traverse rate of X, Y, Z axes 40 m/min C-axis speed 18 min⁻¹ • Tool magazine for 160 tools (SK50) • B-axis, 0.0001° (continuous via ETA/ISO, interpolation possible) • Handwheel (mobile) • e-Tower • Main spindle, «High Torque» version, torque 8,000 Nm • Linear measuring system for X and Y axes. • Provision for spindle cooling via a 70 bar cooler, including M functions • Automatic shutdown. • 3 rotating lamps for displaying machining status. • Mazak Monitoring System B, Renishaw MP10 probe, optical; probe and function included under MAZATROL. • 3 pcs. plates (1 x Ø 1250 mm / 2 x 1000 mm MAZAK) CONSEP 2000 chip conveyor, lateral discharge. • High-pressure pump, type RKP-32-5.5 kW; pump adjustment from 20 to >70 bar

Condition: ready for operation (used), Year of construction: 1998, operating hours: 116,213 h, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, controller manufacturer: MAZATROL, controller model: T-Plus, number of axes: 3, This 3-axis Mazak SQT-30M * 1000 turn-mill centre was manufactured in 1998. It features a maximum turning diameter of 410 mm and a turning length of 989 mm. The machine is equipped with a Mazatrol T-Plus control system and offers a spindle speed range of 35 - 3,300 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak SQT-30M * 1000 machine we have for sale. Contact us for further details. - Working Hours: 116,213 hours- Max. Swing Diameter: 560 mm- Max. Swing Over Carriage: 500 mm- Max. Turning Diameter: 410 mm- Standard Turning Diameter: 336 mm- Max. Turning Length: 989 mm- Max. Bar Capacity (Diameter): 77 mm- Main Spindle Speed Range: 35 - 3,300 rpm- Main Spindle Motor Power: 26 kW / 22 kW (30 min / 100% continuous)- Max. Spindle Torque: 637 Nm- Spindle Nose: A2-8"- Spindle Through-Hole: 88 mm- Chuck Diameter: 304 mm- C-Axis Indexing: 0° - 360° / 0.001°- Turret Positions: 12- Turning Tool Shank Size: 25 x 25 x 150 mm- Boring Bar Shank Diameter Range: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm- Turret Indexing Time: approx. 2.2 s- Driven Tools Motor Power: 7.5 kW- Driven Tools Max. Torque: 96 Nm- Driven Tools Speed Range: 90 - 1,500 rpm- Driven Tools Drilling Capacity: 23 mm- Driven Tools Tapping Capacity: M16 (H-type holder) / M12 (V-type holder)- Driven Tools End Milling Capacity: 25 mm- X-Axis Travel: 245 mm- Z-Axis Travel: 1,035 mm- X-Axis Rapid Traverse: 18 m/min- Z-Axis Rapid Traverse: 24 m/min- C-Axis Rapid Traverse: 100 rpm- X/Z-Axis Feed Rate: 0 - 5,000 mm/min- C-Axis Feed Rate: 1° - 2,000°/min- Tailstock Quill Stroke: 130 mm- Tailstock Quill Diameter: 100 mm- Tailstock Taper: MK 4- Tailstock Travel: 880 mm- Coolant Tank Capacity: 250 l- Coolant Pump Flow Rate: approx. 20 l/min- Coolant Pump Pressure: 5 bar- Power Capacity: 52 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 100 l/min- Required Floor Space: approx. 7.7 m²- Machine Weight: approx. 9,500 kg- Additional Equipment & Accessories: Tool Eye (tool presetter), 3-jaw hydraulic chuck 304 mm with soft/hard jaws, chip/coolant guard enclosure, work light, synchronized tapping, driven tool holders (CAT40 3x vertical, 3x horizontal), boring bar holders, set of adjusting tools, foundation equipment Technical Specification Counter Spindle No Cedpfxsz D Dfgo Acpjrh Driven Tools Yes

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible Crjdpfx Acezal Raspoh ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch Cedpjz Eavwofx Acperh • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Condition: repair required (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 65123, For sale: Mazak QT 10N with Knoll chip conveyor. The machine and chip conveyor are functional, but the X-axis needs to be overhauled and is currently not in operating condition. Crodswn D Nfopfx Acpsh The price is a fixed price and non-negotiable.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration Csdpszg U Akjfx Acpjrh collision sensors dust extraction intelligent cutting process monitoring

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 101353-U, turning diameter over cross slide: 370 mm, turning length: 305 mm, turning diameter: 230 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 35 rpm, rotational speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, feed length X-axis: 160 mm, feed length Z-axis: 360 mm, quill travel distance: 275 mm, quill diameter: 55 mm, quill stroke: 75 mm, swing diameter over cross slide: 370 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, turning diameter over bed slide: 435 mm, turning diameter over top slide: 370 mm, type of input current: three-phase, torque: 96 Nm, overall weight: 2,800 kg, swing diameter over bed slide: 435 mm, bar passage: 42 mm, chuck outer diameter: 144 mm, swing diameter over top slide: 370 mm, center width: 500 mm, center height over cross slide: 185 mm, spindle nose: A2-5", center height: 218 mm, center height in crank: 218 mm, bar diameter (max.): 42 mm, collet bore: 42 mm, travel distance cross slide: 160 mm, Equipment: rotational speed infinitely variable, Mazak Super Quick Turn 10M (SQT-10M) CNC Lathe For sale is a Mazak Super Quick Turn 10M (SQT-10M) CNC lathe from our own machine inventory. The machine comes from an active production environment and is suitable for precise CNC turning operations. The M-version with powered tools offers additional milling and drilling functions. The existing C-axis enables targeted positioning of the main spindle for additional machining operations. An inspection and testing of the machine is possible after prior appointment at our location in 93073 Neutraubling. Cjdpez Iqv Hsfx Acpjrh Machine data: - Manufacturer: Yamazaki / Mazak - Type: Super Quick Turn 10M - Model: SQT-10M - Year of manufacture: 01/1992 - Serial number: 101353-U - Machine weight: approx. 2,800 kg - CNC lathe - Tool turret - Powered tools / Milling function - C-axis function - Coolant system - Enclosed work area Condition: The machine comes from an active production environment. The optical condition is in accordance with its age. Signs of use on the paintwork and cladding are present and clearly visible in the pictures. An inspection and testing of the machine on site is possible after making an appointment. In addition, a high-quality HAINBUCH SPANNTOP nova 42 KK5 chuck can be purchased (optional – not included in the purchase price). - Manufacturer: HAINBUCH - Model: SPANNTOP nova 42 KK5 - Order No.: 2702/0003 - Current new price of comparable HAINBUCH chuck systems: approx. €3,000 net - Chuck jaws / collets are not included Location: 93073 Neutraubling, Germany Availability: Available on short notice / upon agreement Price: Price on request / negotiable Sale from location. Includes free loading onto the buyer's transport vehicle.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Crjdpsz Iw Ezjfx Acpeh Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Travel in the Y-axis: 410 mm Crsdpozpynkjfx Acpjh Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: ready for operation (used), Year of construction: 1995, operating hours: 138 h, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 1,029 mm, total height: 2,800 mm, total width: 3,180 mm, overall weight: 6,500 kg, controller manufacturer: MAZATROL, controller model: T PLUS, product length (max.): 6,365 mm, number of slots in tool magazine: 20, number of axes: 4, This 4-axis Mazak Integrex 30 Y Universal 1000 was manufactured in 1995. It features a maximum turning diameter over bed of 510 mm and a turning length of 1029 mm. The machine is equipped with a powerful main spindle and a milling spindle, providing versatile machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak Integrex 30 Y Universal 1000 turn-mill centre we have for sale. Contact us for further details. Crodpfx Ajz Hbv Uscpjh - Bar Capacity: 64 mm- Max Turning Diameter Over Bed: 510 mm- Turning Diameter Over Slide: 400 mm- Turning Length: 1029 mm- Center Height: 254 mm- Max Load Capacity Chuck: 200 kgf- Max Load Capacity Centers: 1000 kgf- Main Spindle Power: 22 - 26 kW- Min Main Spindle Speed: 35 rpm- Max Main Spindle Speed: 3500 rpm- Rapid Traverse X-axis: 12 m/min- Rapid Traverse Y-axis: 10 m/min- Rapid Traverse Z-axis: 18 m/min- Milling Spindle Power: 7.5 kW- Milling Head Speed: 15 - 6000 rpm- Cylinder Specification: Kitagawa F-1768HS- Chuck Specification (Kitagawa B-10A0815): Max Pressure 2.34 MPa (23.9 kgf/cm²), Max Static Gripping Force 38 kN (3875 kgf), Max Speed 3500 min⁻¹ Included Equipment: Zool Presetter Arm, Chip Conveyor, Coolant System Technical Specification Taper Size SK 40 Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2017, turning diameter 340 mm Cedpfx Ajy E Txdecpsrh turning length 1000 mm control Mazatrol SmoothC

Condition: excellent (used), Year of construction: 2022, Swing over bed 580mm, maximum machining diameter 280mm, maximum machining length 310mm, bar capacity 52mm, spindle speed 6,000rpm, Crodpfxjz Eh Tks Acpjh 12 station turret, Mazatrol Smooth C control, swarf conveyor, & 3 jaw chuck.

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine is being sold due to factory closure. Includes a bar loader. Codjzx Hv Hjpfx Acpsrh

Condition: excellent (used), Year of construction: 2015, MAZAK QUICK TURN SMART 250ML 1000U Max. turning diameter: 360 mm Max. machining length: 1,024 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Crsdpszy Um Aefx Acpjh Max. bar diameter: 80 mm Machine is equipped with: - CNC control: Mazatrol Smart - KITAGAWA 3-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Interface for bar loader magazine - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: like new (used), Year of construction: 2023, operating hours: 2,763 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was commissioned in February 2024 and has 1,778 automatic hours. It has only been used for machining plastics and brass. The subspindle is equipped with a two-jaw chuck for holding workpieces for milling contours. The machine can be inspected under production conditions at any time. It is in like-new condition. Total investment including accessories: €241,000. Equipped with a 12-station turret, all driven. Sale EXW 91413 Neustadt, Germany. Cjdpfx Aceynnhwjperh

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 90 mm, travel distance Z-axis: 290 mm, total height: 1,800 mm, total width: 1,480 mm, overall weight: 2,750 kg, controller manufacturer: MAZATROL, controller model: Fusion 640T, product length (max.): 1,800 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This Mazak Quick Turn 10 features a machine weight of 2,750 kg and a standard length of 1,800 mm. It is equipped with advanced control features such as Polar Coordinates Input and Cylindrical Interpolation. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 10 machine we have for sale. Contact us for further details. Crodpfezza T Rsx Acpeh - Machine Length with Chip Conveyor / Sub Tank: Approx. 4,423 mm (174.12 in)- Main Motion Drives: SRV1-X (X-axis servo motor), SRV1-Z (Z-axis servo motor)- Control Features / Options Enabled: Polar Coordinates Input, Cylindrical Interpolation, Synchro Main Spindle Tapping, Direct DWG Size Input, User Macro, G00 Macro Variables, User Macro Interrupt, Work Coordinates Select Optional Equipment: Sub Tank High-Pressure Coolant, Chip Conveyor (Back Discharging Type), Chip Bucket Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2008, For sale is a vertical CNC machining center, MAZAK VCN-510C-II, manufactured in 2008. The machine comes from an industrial facility and is offered including the accessories and tool holders shown in the pictures. Technical data: Manufacturer: MAZAK / Yamazaki Mazak Model: Vertical Center Nexus VCN-510C-II Cedpfxoz D Dg De Acpsrh Year of manufacture: 2008 Serial/Part No.: C22U5630050 Control: Mazatrol Matrix Nexus Travel distances X/Y/Z: approx. 1,050 / 510 / 510 mm Table size: approx. 1,300 × 550 mm Tool magazine: 30 positions Spindle speed: up to approx. 12,000 rpm Tool holder: SK40 Power supply: 3-phase, 400 V / 50 Hz Control circuit: AC 100 V / DC 24 V Rated connected power according to the nameplate: 33.1 kVA Weight: approx. 7,100 kg Dimensions: approx. 2,750 × 2,800 × 3,800 mm (W × H × L) Various tool holders and other accessories shown in the photos are included. Please refer to the pictures to determine the scope and exact assignment of the accessories, or check during an inspection. The machine shows signs of wear and tear due to age and use. Inspection is possible by arrangement. Loading, transport, and disassembly must be coordinated with the buyer in advance. Sale preferably to commercial enterprises. Subject to errors and prior sale.