Used Measuring Stand for sale (14,237)

Condition: new, Siemens Teleperm M 6DS1603-8RR binary output E Version 1 > unused < in opened original packaging, 100% functional Lrodpfx Afjz Acwhsust

Condition: ready for operation (used), Siemens SMP Centronics G34901-C1032/33, E Status see photo, used, good condition, 100% functional Ledsz Acu Tjpfx Afusrt

Condition: ready for operation (used), Siemens Teleperm M 6DS1400-8BA controller module E Stand 1 SN B2043498 used 100% functional Lsdsz Acwbspfx Afusrt

Condition: new, Siemens Simovert 6SE7016-4FS87-2DA0 Brake Unit E Version C > unused < in opened original packaging, 100% functional Ljdez Acqhepfx Afusrt

Condition: ready for operation (used), Siemens Teleperm M 6DS1001-8AA power supply E Stand 3 SN 40262-I 103B used 100% functional Ljdpez Acvqofx Afuort

Condition: ready for operation (used), Siemens Teleperm M 6DS1142-8AA interface module E-Stand 02 SN C2 096369, used, normal signs of use, 100% functional, scope of delivery as per photos Ljdoz Acvwjpfx Afusrt

Condition: new, Siemens Simovert 6SE7022-5FA87-2DA0 braking unit E version C > unused < in opened original packaging, 100% functional Lrodpjz Acqnefx Afuet

Condition: ready for operation (used), Siemens Teleperm M 6DS1837-8EA Ram memory module E Stand 2 SN CO960610 used 100% functional Ledpfez Acw Ujx Afujrt

Condition: used, Year of construction: 2003, 2003 DEA (Hexagon) GLOBAL IMAGE C/I 091508 Co-Ordinate Measuring Machine (CMM) Lsdpfxoz Dgyge Afujrt Granite Table Dimension 1,500 x 900 x 250mm. Axis Travel 'X'=900mm, 'Y'=1,500mm, 'Z'=800mm. Volumetric Length Measurement Accuracy 2.2 + 3L/1000µm. Repeatability 2.2µm. Probe Head Renishaw PHC10-2 With SP600M/TP200. Controller B3C-LC\2003. Renishaw ACR1 8 Position Probe Rack. Renishaw 4 Position Probe Rack. Joystick Control. Last Calibration Dec 11th 2025. S/No. GLOC000145 (2003). Baker Asset No. S-2004000005. Please Note: This machine is available to collect from 13th October 2026. The new CMM machines will be installed in the same location as the existing machines. Once a new machine is installed, the existing CMM will be switched off, removed from the production line and transferred to the warehouse, with no possibility of it being recommissioned or switched on again. Baker Hughes personnel will remove the existing machine and place it in a configuration suitable for safe transportation and temporary storage within the warehouse. Baker Hughes will not undertake any packaging of the CMM but will ensure that it is positioned and accessible so that it can be loaded onto a truck by the buyer. The buyer will not be required to remove the CMM from its current operational location but will be responsible for all packaging and loading arrangements.

Year of construction: 2020, condition: good (used), Used 6-meter straightedge from Pehu Top quality, new price approximately €20,000. Net measuring length: 6000 mm Also suitable for printing applications. Year of manufacture: 2020 Lrodpfxjzgua Ns Afujt

Condition: ready for operation (used), Siemens 6ES5900-0AA12 Central Processing Unit E, version A, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdoi Edqyepfx Afujrt

Condition: ready for operation (used), Siemens 6FX1113-0AA01 SINUMERIK MS100 E, Stand F / 01, serial number: 1143 + 6FX1191-2AA00, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfei Ed I Nsx Afujrt

Condition: ready for operation (used), Siemens 6EV3054-0DC, installation-ready power supply unit, type E, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Lrodpfx Asi Edvwsfust

Condition: ready for operation (used), Siemens 6ES7478-2BA00-0AC0 E-Stand 2 expansion module, serial number SVPH3227452, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lredpfx Afji Eduvouet

Condition: good (used), Inspection table / Measuring table Manufacturer: STOLLE Tabletop dimensions: (mm) 3,000 x 3,000 x 350 Lredpfx Aozwpucefust Accuracy class 1 Tolerance 0.04 mm Plate weight approx. 6,100 kg Equipped with 13 legs for leveling.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Lrodpfoyvv Trsx Afuot Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: new, Year of construction: 2023, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, path measurement accuracy: 2 mm, overall weight: 435 kg, travel speed (max.): 30,000 mm/min, compressed air connection: 5 bar, Equipment: documentation/manual, type plate available, The COORD3 Benchmark 06.05.05 is a high-quality, CNC-controlled portal measuring machine (half-gantry type) designed for accurate 3D product inspection. The machine combines a stable mechanical structure with high measuring speeds, making it suitable for use in both temperature-controlled measuring rooms and controlled production environments. 𝗘𝘅𝗰𝗲𝗹𝗹𝗲𝗻𝘁 𝗰𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻 (𝗗𝗲𝗺𝗼𝗻𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻 𝗺𝗼𝗱𝗲𝗹): This CMM is in near-new condition. The machine has only been used as a demonstration model and therefore has seen very little use. There is no production wear, meaning the system is in absolute top condition, both mechanically and electronically. 𝗛𝗶𝗴𝗵 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝘃𝗶𝘁𝘆 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗣𝗛𝟮𝟬 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗵𝗲𝗮𝗱: The machine uses the advanced Renishaw PH20 probe head. This head uses ‘head touches’ (fast pivoting movements of the head itself) instead of moving the entire machine axes. This results in a measuring cycle that is up to three times shorter compared to traditional systems. 𝗛𝗶𝗴𝗵 𝘁𝗵𝗲𝗿𝗺𝗮𝗹 𝘀𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆 (𝟭𝟲 - 𝟮𝟲 °𝗖): Thanks to the optional multi-sensor temperature compensation system, the machine maintains its accuracy over a wide temperature range. This makes the CMM suitable for use near the production line without requiring a strictly temperature-controlled environment. 𝗗𝘂𝗿𝗮𝗯𝗹𝗲 𝗮𝗻𝗱 𝘀𝘁𝗮𝗯𝗹𝗲 𝗳𝗼𝘂𝗻𝗱𝗮𝘁𝗶𝗼𝗻: The machine bed consists of a solid granite table with integrated guides (flatness according to DIN876/III). Because all axes are equipped with air bearings, there is no mechanical friction or wear, which guarantees long-term repeatability. 𝗖𝗼𝗺𝗽𝗮𝗰𝘁 𝗮𝗻𝗱 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻: The CNC controller and the PC are integrated into the machine's base. This saves valuable floor space in your workshop or measuring room. The monitor and keyboard are mounted on a flexible, pivoting operator arm. Ledpfxsz Eh T Rs Afuort 𝗠𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗿𝗮𝗻𝗴𝗲 𝗮𝗻𝗱 𝗰𝗮𝗽𝗮𝗰𝗶𝘁𝘆: The effective measuring volume is 600 mm on the X-axis, 500 mm on the Y-axis, and 470 mm on the Z-axis (reduced from 500 to 470 mm due to the physical design of the PH20 head). The robust granite table is designed to support heavy workpieces with a maximum product weight of up to 300 kg. 𝗛𝗶𝗴𝗵 𝘁𝗿𝗮𝘃𝗲𝗿𝘀𝗲 𝘀𝗽𝗲𝗲𝗱 𝗮𝗻𝗱 𝗱𝘆𝗻𝗮𝗺𝗶𝗰𝘀: The machine is equipped with a powerful NC drive via DC motors with backlash-free friction drive on steel guides for all axes. This results in an impressive maximum positioning speed of 30,000 mm/min (500 mm/s) and a maximum acceleration of 1500 mm/s², allowing measuring programs to be executed with minimal pauses. 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗲𝗱 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗮𝗰𝗰𝘂𝗿𝗮𝗰𝘆: The machine's performance has been fully verified according to the strict international UNI EN ISO 10360-2 standard. With the PH20 measuring head, the system guarantees a path measuring accuracy (MPE) of 2.7 + 3.0L/1000 µm under optimal conditions (18-22 °C), and a maximum repeatability accuracy (MPL) of 2.5 µm. The maximum form measuring error of the probe (MPE PFTU) is 2.7 µm. 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: For the commissioning of this CMM, a stable compressed air supply is required with a minimum pressure of 5 Bar (71 PSI) and a constant air consumption of 90 Nl/min. The electrical installation is very simple and requires a standard single-phase power supply of 230 V (±10%) at 50 Hz. The total machine weight, including the base, is 435 kg (excluding PC peripherals).

Condition: used, Year of construction: 2018, max. cutting width: 5200 mm max. cutting height: 2200 mm saw blade diameter: 250 mm max. processing thickness: 60 mm saw blade arbor: 30 mm lower support: plastic material support: plastic strips, retracting measuring system: digital display swiveling saw head: manual saw feed: manual mounting: free-standing extraction: external Lodpfx Aez Aibgofujrt locking of saw beam: manual weight approx.: 1200 kg motor power: 4.2 kW Location: Nattheim

Condition: used, Year of construction: 1994, Cutting length 5300 mm, cutting height 2200 mm, cutting height 80 mm, manual feed, measuring system: scale, free-standing supports, rated current 21 A. Storage location: Nattheim. Lsdjytrhrepfx Afuort

Condition: used, Probe for measuring machine, measuring head, probe head Lrjdstpkybspfx Afust RENISHAW Probe Kit - TP 20 System Included are: 1x star probe with thread M2 (5x stylus M2 with ruby ball Ø 2mm; length 15mm; star Ø 38mm; 1x 6-way probe head = probe module TP 20 (6-way) 1x extension 50mm, probe extension NVMS-50 (with 2x mounting wrench) in original plastic storage box used in good condition

Condition: used, Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Measuring probe for measuring machine Serial: 77501 - A Probe holder Probe body TP20 for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe mounting M8 thread Head mounting with MS shaft Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket Lrsdpfxjrnagpe Afuet - 5 M8 threaded connections for probes (4 blanking plugs) total weight 280g used in good condition

Condition: new, 15000 kg height 790 - 1150 mm width 1200 mm ja 790 - 1150 mm 120 x 1200 mm Ledpsqvq Txjfx Afusrt Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - galvanized - CE marking - Transport on request

Condition: new, 2000 kg height 800 mm width 1200 mm nein Ledpfxoxylnde Afusrt 1200 x 100 mm 1,2 x 0,8 x 0,8 m

Condition: new, 5000 kg height 500 mm width 1200 mm nein 1200 x 100 mm 1,2 x 0,53 x 0,5 m Support stand, assembly stand, steel stand, welding table, assembly table, Lrjdpexylnwefx Afuot steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - Transport on request - CE marking

Condition: new, 15000 kg height 790 - 1350 mm width 2000 mm ja 120 x 2000 mm Lrjdpfjl Sva Dex Afuot