Used Mikron Ume 600 for sale (178)

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW Itodpfx Aetv Ia Tofvjk weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Iedpfx Ajt Hw D Rofvotk Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 Itedpjwcyq Isfx Afvjk -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Itodpfewcyngex Afvjk -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 Isdpfx Aotz Sqhofvetk total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant

Condition: excellent (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board Itodek Aua Nopfx Afvek -Manufacturer: Mikron, Electronic module circuit board for operating unit TCD22, original packaging -Type: WW TCD 22 . 104.73.20.041 -Cardboard dimensions: 410/310/H65 mm -Weight: 0.6 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min Ijdpscxxpqsfx Afvetk rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m

Condition: good (used), MAchine come with toolholders. Isdpfsvk Ng Asx Afvotk

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Romarsh, three-phase transformer from CNC machining center Mikron VC500D -Type: 3UR5-0/64 -Power: 10 kVA -Dimensions: 315/215/H275 mm Ijdpfjy Tv Svox Afvotk -Weight: 45.5 kg

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm Itedpfxjcxxq Do Afvjk tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Itedpsy H Itrsfx Afvok -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Transformer: from CNC machining center Mikron VC500D -Type: PTNo.. PTC 2500/139 -Power: 1200 VA -Dimensions: 215/210/H255 mm Itodpoy Tv S Ajfx Afvek -Weight: 30.2 kg

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min Itodpfxjub Amfo Afvsk - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Iedpfx Aecl Rurofvstk Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Year of construction: 1999, condition: excellent (used), Working travels 710x500x500mm Table size 1080x580mm Spindle taper 40 Spindle speeds -10000 rpm Tool changer 30 Pos. Control HEIDENHAIN TNC-430 Coolant through spindle MARCELS MASCHINEN CH Iedpfx Aod Hftxefvstk

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm Itjdpfxokvrpts Afvok -Weight: approx. 525 kg

Condition: used, control: Heidenhain TNC 155 tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm travel: x-710, y-500, z-460 mm Iodpfxec Tt Hrs Afvstk spindle speed: 31,5-3150 rpm accessories: angle table, coolant equipment, div. retainers

Year of construction: 2023, condition: new, Polyp Scrap Grapple for Cranes Palfinger Hiab Capacity: 300 Lt / 0.3 m3 Iedpfx Afonziblsvetk Model: 4 Tinned - Half Closed Gross Weight: 450 Kg

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHG5202500000125, Orange Peel Grapple for Scrap Capacity 600 Liters Model 5 Tinned Gross Weight 1150 KG Itedpfxsxrymxj Afvsk

Condition: new, Year of construction: 2025, Scrap Grapple, Scrap Grab, Multi Tine Grab for Scrap Capacity 0.6 m3 Model 5 Tinned Iedpfx Asxryrbefvotk Hardox 450 Wearing Plates Rotating Option

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHB5202500000156, Scrap Grab for Terex Fuchs, Sennebogen, Liebherr 5 Tinned Model Itsdpsxryn Aefx Afvsk 500 Liters Capacity

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min Iedpj H I Hdjfx Afvstk rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories Isdsilp Euopfx Afvstk MARCELS MASCHINEN AG

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg Itodpfekzpngox Afvok

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm Ijdpfx Afskxhpusvstk -Weight: 23 kg/pc.