Used Minarc Evo 200 for sale (17,176)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Fpsdpfxei Ri N Uj Am Eop Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: excellent (used), NIMO-KG SKV200 MK ID.NO. 2470 Nimo-KG SKV 200 MK meatbin lifter for 200 liter meatbins. Dimensions W 130 D 120 cm Total height 400 cm. Fpsdpfxoiz Awwe Am Esp Tip height 302 cm.

Condition: used, Two Forkardt faceplates Diameter 200mm 2 BHE 200 Short taper diameter 106.4 mm = Size 6 Bolt circle diameter 133 mm Fsdpecurfyjfx Am Eopp

Condition: used, Faceplate chuck Manufacturer: WMW Fpsdjcu Ngkopfx Am Esp Clamping range: 30 - 200 mm Maximum clamping force: 3500 kN Short taper size: 5

Condition: used, Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch Fpjdpfx Aohbhyuem Ejp PN pressure max. 8 bar Load max. 8 kg Robot weight 51 kg + Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data, see image Since the item is available in multiple units and the robots have different working tools, the images are only examples and may vary. Item condition: used (Changes and errors in the technical data and information are subject to change!) In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, and forklifts are plentiful. In total, 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 working days. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² Fedpobpg Ncjfx Am Ejpp • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump Fsdpfx Amsb A I Sxs Ejpp -Max. pressure: 160 bar - Flow rate: 3 l/min per pump -Drive: 0.55 kW 1360 rpm -Hydraulic tank Quantity: 1 piece available -Weight: 95 kg

Year of construction: 2014, condition: new, digital length measuring device, manufacturer: Heidenhain, ID 355 533-04 Fsdpsb T Uqijfx Am Eopp Measuring scale, type LF 481 – Signal 1Vss – Measuring length 200mm.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful Fpedpfx Ajfg E H Som Eep and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved Fodpfx Amefg E Ibo Eepp exact fine scaling, easily adjustable and stored.

Condition: used, saw blade diameter 350 mm Fjdpfxjfc T Uge Am Eepp capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,285 t dimensions 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.

Condition: used, Elmo Rietschle (Gardner Denver) G200 Industrial Side Channel Blower / Vacuum Pump (12.5 kW, 2BH1900-7AH17), Used Equipment Technical Data: Manufacturer: Gardner Denver Schopfheim GmbH / Elmo Rietschle (Made in Germany) Type: G 200 / 2BH1900-7AH17 Factory Identification No.: BN 10024286 007 / 1007 Protection Rating: IP55 (totally enclosed, protected against dust and water splashes) Electrical and Performance Data (50 Hz / 60 Hz): Motor Power (50 Hz): 12.5 kW (2920 RPM) Motor Power (60 Hz): 14.5 kW (3500 RPM) Supply Voltage (50 Hz): 345–415 V (Δ) / 600–720 V (Y) Current Consumption (50 Hz): 28 A (Δ) / 16.2 A (Y) Maximum Vacuum / Differential Pressure (50 Hz): -290 mbar / +280 mbar Fedpfx Amjz Rzt As Espp Maximum Vacuum / Differential Pressure (60 Hz): -270 mbar / +260 mbar Features: Robust industrial cast-aluminium housing with cooling fins Oil-free generation of clean compressed air / vacuum Supplied with connected extraction pipework and support frame Overall Dimensions: Width: 730 mm Depth: 640 mm Height: 1090 mm

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 7,550 h, load capacity: 2,000 kg, lifting height: 3,600 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,375 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fpedpfj Agc Nwjx Am Eop ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Dual pedal Condition: Refurbished, no warranty Technical condition: good Front tire type: Superelastic Front tire size: 200 50 10 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 16x6-8 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 690Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2023 Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection, including inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options. We will also be happy to provide you with a quote for delivery at favorable conditions. We also offer trade-in for Linde equipment, even if you do not purchase equipment from us. The stated operating hours were recorded at the time of listing. Subject to prior sale, changes and errors. Side shifter, Kaup side shifter NEW 1040mm 3rd valve, work light rear, work light front, heater, full cabin, safety light.

Year of construction: 2011, condition: refurbished (used), Technical Specifications Product number T 200 Year of manufacture 2011 Chamber size 3 x 137×187 Capacity for packaging 1-3 / min External dimensions [height x width x depth] 720x980x1620 mm Standard vacuum pump 63 m3/h Weight: 250 kg Power supply 400V 5N Fpedpfxs Agp Iqe Am Eep Machine serviced and ready for operation Machine creates a vacuum down to 1 mbar – pump has been overhauled The machine is equipped with molds for 137×187 trays – depth can be customized Net price Video showing the machine in operation

Condition: new, Year of construction: 2024, functionality: fully functional, The REPLAY evo range offers basic products without sacrificing excellent quality. Equipped with advanced new and exclusive systems, it represents the most competitive solution of the new machines with bell from minipack®-torre. REPLAY 55 evo combines technological performance with essential and compact shapes, without sacrificing the excellent quality that characterizes minipack®-torre machines. - Power supply V 200/230 - Phase ph 1 Fsdpjuakl Hjfx Am Eopp - Installed MAX power kW 3.15 - Production per hour p/h (pph): 0-300 - Sealing bar useful dimensions: 540x390 mm - MAX product dimensions: 500x380x200 mm - MAX coil dimensions (diameter): 250 mm - MAX film reel dimensions (width): 600 mm - Work table height: 940 mm - Machine dimensions with protective cover open: 1260x810x1400mm - Machine dimensions with closed protective cover: 1260x810x1190mm - Machine weight (net/gross): 105/126 kg

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP Fpjdpfxsx H Tvfs Am Ejp - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Condition: new, controler for resistance weldingmachines Dalex MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1 --- MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1 --- MPS 300multiR1 Fpjdpfxsyrx Nto Am Ejp available from stock

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment Fpjdpfx Aox Rd Hpom Eep • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26009, Year of construction: 2018, operating hours: 16,731 h, load capacity: 7,000 kg, lifting height: 6,650 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,350 mm, motor manufacturer: VW, fork length: 2,000 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: UVV, cabin, lighting, sideshift, Triplex mast with full free lift, height: 3350 mm, lift height: 6650 mm, load capacity: 7000 kg at load center: 600 mm, CAM fork positioner with new sideshift, forks length: 2000 mm (new), LED work lights front and rear, road lighting according to German Road Traffic Regulations (StVZO), fully enclosed cab with heating, comfort swivel seat, VW LPG engine, double pedal foot controls, 4x solid SE tires, operating manual included. Technical condition at sale: Forklift is technically overhauled! Major service newly performed! UVV safety inspection passed without defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available by appointment during business hours: Monday to Friday 8:00 am - 6:00 pm, Saturday 8:00 am - 1:00 pm. TRANSPORT: Fedoy I Dmdopfx Am Eopp Low-loader or tarpaulin truck available at favorable rates.

Condition: good (used), Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Fodpfey Hlapex Am Ejpp Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420

Condition: used, operating hours: 8,891 h, mileage: 92,412 km, power: 62 kW (84.30 HP), first registration: 10/2012, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, power assisted steering, seat heater, soot filter, German vehicle, 1st owner, condition as shown in photos, Schmidt Swingo available in multiple units, only 8,891 sweeping hours, selectable four-wheel steering, two front disc brushes (800mm width), front pre-spraying system, sweeping width: 2,800 mm, ideal for footpaths, cycle paths, and narrow alleys, 1.8 m³ debris hopper, fresh water volume: 180 liters, total water volume: 360 liters, hopper lid opening and tipping via cable remote control, VM 56C/9 engine, output: 62 kW, air conditioning, reversing camera, radio, 2 seats, air-suspended driver’s seat, EasyDrive (hydrostatic drive) (SN), seat heating, warning beacons, gross vehicle weight: 4,500 kg, unladen weight: 2,850 kg, payload: 1,650 kg, self-propelled machine. If a new technical inspection (TÜV) is required, we are happy to provide a quotation from one of our partner workshops. Our offer generally excludes new TÜV inspection, new DGUV, new SP, and new UVV. Fpjdpsvhqglsfx Am Esp You can find more trucks and commercial vehicles on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We recommend and strongly encourage viewing and inspecting the goods to avoid any misunderstandings about their condition and suitability. Viewings and inspections are welcome by appointment at any time. All information is provided without guarantee. We accept no liability for errors or incorrect descriptions in the offer. Buyers are obliged to independently verify the condition and features of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: excellent (used), functionality: fully functional, operating hours: 100 h, KNAPP’s OSR Shuttle™ Evo automated shuttle system, designed for high-performance storage, order picking, and logistics flow management. This modular system enables flexible, scalable, and energy-efficient operation of modern warehouses. Key technical features: Type: AS/RS (Automated Storage and Retrieval System) Capacity: up to 50 kg per bin Installation height: up to 30 m Throughput: up to 1,000 dual cycles/hour Operation: 1D or 2D, depending on the configuration Components included (depending on configuration): OSR Shuttle™ shuttles High-density shelving Fedpfxoxtawte Am Eopp High-speed vertical lifts Order picking stations Connection accessories (conveyors, power supply, cabling, etc.) Environment: suitable for refrigerated areas (down to -28 °C) Applications: e-commerce, distribution, industry, pharmaceuticals, electronics, etc. Compatible with “goods-to-person” workstations and automated conveyor systems Quantity: 20 Price: €4,590.00 (excl. VAT) per shuttle

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW Fsdpfx Amoxaatbo Eepp weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg Fpsdpsxaavpjfx Am Eop dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397092

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds Fsdpfexaav Ajx Am Espp - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice