Used Minarcmig Evo 200 for sale (16,592)

Year of construction: 2001, condition: used, turning diameter 420 mm turning length 1200 mm Bedpfxoh N D Une Aglecu control Fanuc bore diameter 60 mm

Condition: used, Year of construction: 2011, Tube Grinding Machine – Custom-Built - Tube grinding machine with CE marking - Suitable for grinding or surface pre-treatment of various pipes - Used for galvanized steel pipes as surface pre-treatment before painting - Can be modified for other materials (requires different abrasive belts and possibly adjustments to the feed system) - Control system: Mitsubishi - Automatic infeed and outfeed from the machine - Multiple pipes can be loaded, processed sequentially, and temporarily stored after processing Bedpfxox E T Sws Aglscu - Pipes are picked up by grippers and guided through the machine to the outfeed - Includes Felder RL125 extraction system for grinding dust removal - Requires compressed air for operation - Machine is sold without safety equipment - Year of manufacture: 2011 Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm - Connected load (grinding machine): 6.75 kW - Connected load (extraction): 3 kW - Footprint (without extraction unit): 2,500 x 20,500 mm

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 Bcedpfx Asuwrz Hsglju - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: used, Year of construction: 1995, Gildemeister CTX-200 - CNC Lathe - Gildemeister/DMG CNC control system - 3-jaw chuck, Ø 140 mm - 12-position tool turret with driven tools - Work area lighting Bodpfxoxy R Uie Aglscu - Chip conveyor - 10,810 operating hours - Including various tools - Including operating manuals and documentation - Year of manufacture: 1995 Technical specifications Working area: - Swing diameter over bed cover: 440 mm - Swing diameter over cross slide cover: 210 mm - Cross travel: 160 mm - Longitudinal travel: 350 mm Spindle: - Spindle nose diameter: 120 mm h5 - Spindle nose diameter at front bearing: 85 mm - Spindle bore: 56 mm - Chuck diameter: 140 mm Main drive: - Drive power (100/50% duty cycle): 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 - 5,000 rpm Feed system: - X-axis feed force: 200 daN - Z-axis feed force: 300 daN - X-axis rapid traverse: 12 m/min - Z-axis rapid traverse: 16 m/min - Measuring system: incremental rotary encoder Tool turret: - Universal disc turret, automatic indexing, directional logic - Number of tool stations: 12 - Tool holder shank (DIN 69880): 20 mm - Tool indexing time per station (30°): 0.48 s Universal disc turret with driven tools: - Number of tool stations: 12 - Max. number of driven tools: 12 - Max. clamping diameter for driven tools: 12 mm - Drive power (100/50% duty cycle): 2.5 / 3.0 kW Tailstock: - Quill diameter: 50 mm - Quill stroke: 120 mm - Quill taper: MT 3 - Max. quill pressure: 300 daN Machine dimensions: - Dimensions with chip conveyor (W x H x D): 3930 x 1690 x 1651 mm - Weight without chip conveyor: 2,950 kg Noise emission: - Constant workplace sound pressure level: 77 dBA

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm Bjdpfx Asycxinoglscu z-travel 500 mm total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 400 mm z-travel 375 mm total power requirement --- kW weight of the machine ca. 7,6 t Bcjdpfx Asycxihsgleu dimensions of the machine ca. --- m

Condition: used, This listing is for the Bio-Rad PowerPac 200 DC power supply Bcedpeyfh Apjfx Agleu The unit is in full working condition and is ready for immediate use The Bio-Rad PowerPac 200 is a DC power supply designed primarily for gel electrophoresis and blotting applications in molecular biology and biochemistry labs. It provides stable, controllable electrical power to electrophoresis tanks used for separating DNA, RNA, or proteins

Year of construction: 2023, condition: ready for operation (used), number of axes: 5, This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Additional equipment • 36 tool change • Includes tailstock function Machine Benefits Technical Machine Benefits • The machine has a 36 mm tool • A 12 to 15 bar flushing system Bsdpfxeyaqvuj Agljcu • Tailstock function • Cooling water cooling • Bar puller function • Milling spindle 12000 rpm • Main and counter spindle • 1 degree swivel b-axis Extra Information OPM probe tool measurement Optional: Capto C6 tool holders

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 575 mm, spindle motor power: 18,500 W, total height: 1,975 mm, overall weight: 5,150 kg, controller manufacturer: MAZATROL, controller model: PC Fusion CNC 640 T, number of axes: 2, This Mazak SQT 200 MS was manufactured in 1999. A robust horizontal turning machine featuring a turning diameter of 300 mm and a length of 534 mm. It includes a spindle speed up to 5000 rpm and motor power of 18.5 kW. Ideal for precise and efficient turning operations. Contact us for more information. Machine Benefits Technical Machine Benefits • Turning length: 534 mm Bcedpfx Agjyaqibjlsu • Turning diameter: 300 mm • Diameter above the bed: 350 mm • Diameter above transversing slide: 350 mm • Number of driven tools: 12 Extra Information Working condition. Full documentation available. Dimensions Machine Depth 3025 mm

Condition: ready for operation (used), Year of construction: 2010, This 5-axis Mazak Integrex 200 IV ST was manufactured in 2010, featuring high-pressure cooling at 70 bar and a 40-tool magazine complemented by 9 turret positions. It includes a SMW steady rest SR-3.1-MSW with a clamping range of 25-165 mm and two sets of SMW chuck KNCS-NB-260-78. Fully refurbished in 2020, it's prepared for a Renishaw probe and includes TOPSOLID 7.18 CAD/CAM software. Consider the opportunity to buy this Mazak Integrex 200 IV ST turn-mill centre. Contact us for more information. • 40 tools in the magazine + 9 turret positions • SMW steady rest SR-3.1-MSW, clamping range 25-165 mm • RMP60Q touch probe • Inspection Plus package • Axes: 5 • High-pressure cooling: 70 bar • SMW chuck KNCS-NB-260-78 (2 sets of base jaws) • Steadle is fully integrated into the PLC (optional extra) Bcjdpfx Asx Imq Eogleu • CAD/CAM software with floating license TOPSOLID 7.18 • Post-processor for the specified machine • Completely refurbished in 2020 (by MAZAK) • Machine was mainly used for finishing.

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: Bcedpfx Aoyaatpogleu "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. Bsdpfx Ageufhzvjljcu This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)

Condition: used, This listing is for the Tecan Infinate 200 Pro Microplate Reader The unit is in full working condition and is ready for immediate use The Tecan Infinite 200 PRO is a multimode microplate reader — a laboratory instrument used to measure the intensity of light in biological and chemical assays placed in microplates (usually with 96, 384, or more wells). It’s widely used in life sciences research, clinical labs and drug discovery for quantitative analysis of samples Typical Uses Laboratories use this type of plate reader to: • Quantify DNA/RNA or protein concentrations • Run immunoassays like ELISA Bsdjydqmzspfx Aglocu • Perform drug screening assays • Read fluorescence or luminescence signals from reporter gene assays • Monitor cell viability or enzyme activity

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Bedoxluf Aopfx Aglscu Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg Bcedjwtl Rnepfx Aglsu

Condition: used, Year of construction: 2026, machine/vehicle number: PB15569, Drivetrain Type of fuel: LPG Weights Empty weight: 2.980 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.170 cm Bodex Uv Tispfx Agljcu Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1030 m Transport dimensions (LxWxH): 5.63x0.95x2.07 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Bcedpfx Asx Tulnoglou Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2001, Year 2001 serial number 0940/01 operating pressure 8 bar +++++ Bcedpfx Agjx U A Hpelju Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), machine/vehicle number: JN1YBAM20U0001348, mileage: 281,100 km, first registration: 04/2010, fuel type: diesel, tire condition: 50 %, axle configuration: 4x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2010, Equipment: ABS, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest Bcodpfx Aoyf Up Nsglju - Day Cabin - Front suspension: Leaf - Rear suspension: Leaf = More information = Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels Technical condition: very good Visual appearance: very good

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Bcedpfxsyaizve Aglou Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2025, This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine. Additional equipment • Outfeed Table: Made of solid steel with a 30° incline. Length 3000 mm. • Safety Features: Rear protective cover, dual dust protection, and automatic lubrication. Machine Benefits Qualitative Machine Benefits • Cutting cross-section: max 240x150 / 300x110 mm, min 30x15 mm • Pusher slide dimensions: 300 x 345 x 25 mm • Feed speed: adjustable max feed speed set to 60 m/min • Pusher drive system: brushless dc servo drive motor with electronically controlled feed. • Productivity enhancements: increases productivity and improves wood yield. • Reliability features: robust construction with thick, reinforced steel frame. • Processing accuracy: two electropneumatic aligners ensure square cuts. Technical Machine Benefits • Special inclined surface with a 30° angle, intelligent clamping, and automatic lift pusher during scanning. • Windows-based software with a 22" led color display and remote maintenance capability. • Electronic system: real-time communication with a modern computer-aided cnc. • Software: linux-based optimization algorithm with a windows 10 interface. • Pc features: intuitive s4u software, extensive customization, real-time updates, error detection, and remote maintenance software. Bodpeyaikdefx Aglecu • Saw motor power: 5. 5 kw • Saw blade type: carbide-tipped circular saw • Blade diameter: 500 mm • Number of teeth: z=108 • Board length before cutting: max 4100 mm, min 500 mm Extra Information Machine still under power. Please contact us for consultation and a custom-tailored offer.

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 Bedpfx Agexdkzqsljcu - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: ready for operation (used), Year of construction: 1999, Machine Model: DMU 50 eVolution (5-Axis Machining Center) Control: Heidenhain MillPlus (MillPlus Control) Axes: 5 (X, Y, Z, B, C) Machine Weight: approx. 5,000 – 5,100 kg Installation Dimensions (L × W × H): approx. 2,683 × 5,353 × 2,470 mm Total Power Requirement: ~ 38 – 40 kVA Working Area & Axes X-Axis Travel: 500 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm B-Axis (Swivel Range): ±180° C-Axis (Rotary Range): 360° Spindle Data Max. Speed: 20 – 18,000 rpm (infinitely variable) Spindle Drive: approx. 35 kW (40% duty cycle) / 25 kW (100% duty cycle) Torque: approx. 130 Nm (40% duty cycle) / 87 Nm (100% duty cycle) Tool Interface: SK 40 (standard) – HSK optionally available for certain models Table & Workpiece Table Size: ø 500 × 380 mm Max. Table Load: 200 kg T-Slots: 7 × 14 mm (H7) ⚙️ Tool Magazine Magazine Capacity: 32 tools Max. Tool Length: ~ 200 mm (depending on magazine configuration) Max. Tool Weight: ~ 6 kg Bodpfxsyay Rzj Aglocu Feeds / Rapid Traverse Working Feedrate: up to 20,000 mm/min Rapid Traverse X/Y/Z: up to 50 m/min

Condition: used, Oscillation ja_yes ja / nein Bsdpfxjwzmuws Aglecu 0 ja_yes ja/nein 0 ja_yes ja/nein tiltable up to ja_yes Motor output 2,2 kW Table dimensions 1000 x 350 mm sanding width 200 mm Weight 300 kg Langzauner LZK 3/2, BB 200 Edge Sander ----- Technical manufacturer's specifications: Table width: 345 mm Table length: 1000 mm Maximum sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Circular sanding support: Yes Oscillation: Yes Height adjustment: Manual table Swivel sanding belt: Yes Space required length: 1800 mm Space required width: 900 mm ----- Price of the above-mentioned machine upon request! (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT. No original images available yet; image from a brochure for the same model

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 678 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. 8,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum sensor x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Bsdjycthlepfx Aglocu Hot runner control, 10 zones Injection unit hardened - bimetallic Energy-efficient machine – fitted with a system of 3 variable-output hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 robot Year of manufacture: 2019 4-axis robot: 3 axes powered by electric servo motors; C axis - pneumatic Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started by our service technicians before sale. A video of the technical tests for the selected machine can be provided, or you can attend technical live tests at our facility in Łódź. Price: On request