Used Mk2 for sale (201)

Condition: used, mileage: 249,000 km, power: 205 kW (278.72 HP), first registration: 06/2004, fuel type: diesel, overall weight: 24,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,430 mm, Year of construction: 2004, Equipment: all wheel drive, crane, Grove GMK 2035, year of manufacture 2004, excellently maintained, 48 meters: 29-meter main boom, 19-meter fly-jib, with new UVV (safety inspection) and new TÜV (roadworthiness certification). For sale is a meticulously maintained Grove GMK 2035, German machine, 2nd owner, complete service history, exceptionally well-kept and reliable condition, professionally operated and fully serviced. Technical Highlights & Equipment: - Grove GMK 2035, year 2004 - Operating hours: approx. 21,400 h - Original 48-meter ship fly-jib - Twin hydraulic folding jib, backlash-free - Telescopic main boom: up to 29 m - 4x4 all-terrain chassis - Mercedes drive unit (robust, reliable) Recent maintenance: - Complete winch service: brand new (cost €14,800, documentation available) - One of the key components of the GMK 2035, completely overhauled and tested - New UVV, all safety-relevant inspections freshly performed - New TÜV, vehicle and crane inspection fully renewed - Well-maintained, seamless history with full documentation - No pending repairs - Mechanics, hydraulics, boom, and electrics in excellent condition Documentation: - All inspection reports readily available - Load charts for main boom and fly-jib - Winch documentation and €14,000 invoice - Complete German service history - Operator’s manual and service booklet Gbedpfjz Hd Hisx Al Uou Technical condition: - Hydraulics: tight, clean, powerful - Boom: in excellent condition, no play - Visual: tidy and clean - Immediately operational, no further investment required Despite utmost care, errors in this listing cannot be excluded. We reserve the right for mistakes and prior sale.

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a like-new ECO DB1 lathe with a center distance of approximately 610 mm. The exhibition machine is in its original condition, so you will receive the full warranty. Technical data - Center height approx. 230 mm - Center distance approx. 610 mm - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Motor 2 HP (230 V) with frequency inverter - 3 speed stages: 50 – 900, 100 – 1,850, 200 – 3,850 rpm - Right/left rotation - Headstock and tailstock cone MK2 / bore 10 mm - Tailstock quill travel 115 mm Gbjdjzw D U Djpfx Al Uju - Indexing head with 24 steps - Hand rest tenon 25.4 mm - Dimensions (L x H x D approx.) 1,600 x 1,210 x 620 mm - Weight approx. 170 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related terms: Lathe, turning machine, turning center, wood lathe, woodturning, lathe tool, wood turning, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Table size: 1120 x 280 mm T-slots in table: 3 x 16 mm Table longitudinal travel: 600 mm Table transverse travel: 250 mm Gbodpfxoybb T He Al Usu Vertical travel: 360 mm Spindle rotation: +/-45° Distance between table surface and spindle face: 230–630 mm Maximum spindle speed (vertical): 108–2400 rpm Maximum spindle speed (horizontal): 90–2000 rpm Spindle taper: ISO 40 Spindle stroke: 120 mm Power: 2.2/2.2 kW (vertical/horizontal spindle) Dimensions: 1700 x 1450 x 2245 mm (W x D x H) Weight: approx. 1350 kg Accessories, features: - 3-axis SINO digital read our system - spindle feedrate in three steps - 200 mm machine vice - 45° tiltable spindle head - Rotating console - Rotating machine table - 2 x reducers (ISO40/MK3, ISO40/MK2) - Drill head with collet, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 x 15-piece chuck set, diameter 2 – 20 mm - Clamping set - Work light - Cooling water system

Condition: new, Year of construction: 1993, Storage location: 100575648 Transport dimensions (L x W x H): 0 x 0 x 0 Godpjzkz Emofx Al Ujbu ---- Tower crane, Peiner SMK201, jib length 22m, hook height 17m, max. load 2000kg, radio remote control, ready for operation, in good condition.

Condition: new, Year of construction: 1993, Warehouse number: 100576143 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Peiner crane SMK201, reach 22m, hook height 17m, max. load 2000kg, radio remote control, ready for use, in good condition, TÜV valid until November 2023. Gbodpfezk Aitsx Al Uou

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 10,505 h, load capacity: 2,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 48V Gbedpfsz I Hxqjx Al Uju Side shifter

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an almost-new Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The demonstration machine is in original condition, meaning you receive the full warranty. Technical Specifications - Center height: 280 mm - Swing over bed: 550 mm (expandable up to 1,000 mm with optional extension bed and outboard turning attachment) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (European) safety groove - Spindle and tailstock Morse taper: MK2 - Inverter drive (3 belt speeds): - Speed 1: 60 – 1,200 rpm - Speed 2: 100 – 2,200 rpm - Speed 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight carrier: Austria: € 125.00 incl. VAT Germany: € 150.00 incl. VAT South Tyrol: € 180.00 incl. VAT If you are interested in this machine, please provide your complete address via the contact form so that we can process your inquiry professionally. Thank you, your NEUREITER Team Gbodpfx Alstpplne Ueu Related Keywords: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, woodturning tools, turning, machine Reference: R-A0117

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 200 kg, empty load weight: 3,240 kg, construction height: 1,980 mm, fuel type: electric, total length: 3,970 mm, drive type: Elektro, arm reach: 6,400 mm, construction width: 1,490 mm, working height: 12,100 mm, Articulated telescopic platform Condition: New machine Gjdpfx Alou Ty E Ne Ujbu Technical condition: New Front tires type: Non Marking Front tires Size: 23x10.50-360 Front tires Condition: New Rear tires Size: 23x10.50-360 Rear tires Condition: New Description: Aerial work platform classification 3B, integrated charger

Condition: excellent (used), For sale is a Drechselmeister MIDI 2 Plus woodturning lathe with a centre distance of approx. 400 mm. The used machine is in very good condition. Technical specifications: - Centre height: approx. 178 mm / max. turning diameter 355 mm - Centre distance: approx. 400 mm (extendable with bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle mount: M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove - Tailstock with 100 mm MK2 interchangeable quill - Trapezoidal thread and measuring scale Gbjdpfx Aley E Il Es Usu - Motor: 0.7 kW / 1 HP (230 V) with high-quality frequency converter - Weight: approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning lathe, lathe, metalworking lathe, wood lathe, woodturning, turning tools, wood turning, machining, machine Reference: R-M61TS

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 Gedsrv Au Rspfx Al Uobu -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new TEKNATOOL Nova Nebula 230 DVR wood lathe with a direct drive offering speeds from 50 to 4,000 rpm. The demonstration machine is in original condition, so you receive the full warranty. Technical specifications: - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove - Spindle and tailstock taper: MK2 - Variable speed control (direct drive): 50 – 4,000 rpm - 24-position indexing - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with graduated scale and trapezoidal thread) - Machine weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping by freight forwarder: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, lathe, turning machine, turning bench, turning, turning tools, woodturning, machine Gsdpfstpph Sjx Al Ujbu Reference: R-A0117

Condition: used, mileage: 3,000 km, power: 110 kW (149.56 HP), color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you. Tel: A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, C6L Multifunction steering wheel, CB7 Stabilization Level I, CL1 Steering wheel adjustable in inclination and height, CW2 Deletion of vehicle lowering function, D03 High roof, D50 Continuous partition, E07 Hill-start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E4S Smartphone integration package, E57 Electrical system for trailer socket, E7B Navigation preparation, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, ES0 Jump start assistance, ES5 Charging package, dashboard, EY6 Breakdown management, F1K Coat hooks in the cab, F3F Co-driver-optimized gear selector console, F64 Exterior mirrors, electrically foldable, F68 Exterior mirrors, heated and electrically adjustable, F907 MODEL SERIES 907 VAN VS30, FF5 Storage compartment above the windshield, FJ4 Storage compartment under the cockpit, FKA BOX VAN, FR8 Rear view camera, FZ5 Anti-theft and intrusion alarm system, GD8 6-speed manual transmission ECO Gear 360, H12 Warm water auxiliary heating, H21 Heat-reflecting glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL5 Left-hand drive, IR4 Wheelbase 3665 mm, IT4 3.5-tonne vehicle, J10 Speedometer km/h, J52 Engine oil level indicator on cold start, J55 Seatbelt warning system for co-driver's seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JF1 Rain sensor, JG0 Shift point indicator, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage, maintenance interval 60,000 km, JK5 Instrument cluster with color display, JS2 Intelligent Speed Assist, JT7 Cornering Assist, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L13 Fog lights with cornering lights, L65 Ceiling light(s) in LD/FG area with door contact, L94 Deletion of parking light, LA2 Driving lights assistant, LB1 Lateral marker lights, LB5 3rd brake light, LC4 Comfort roof control unit, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle HVO capable, MJ8 ECO Start/Stop function, MK2 Speed limiter 130 km/h, MS1 Cruise control, MT5 EMISSION CLASS EURO 6e RDE5 N1, MU3 OM 654 DE 20 LA 110 kW (150 hp) 3800/min, P47 Mud flaps front, P48 Mud flaps rear, Q11 Longitudinal member reinforcement, Q67 Towing eye rear, R65 Spare wheel holder under frame end, R87 Spare wheel, RF8 Tire brand Michelin (80), RH2 Tires 235/65 R16 C, RM7 Summer tires, RM9 Tire brand, customer's choice, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axles, wireless, S02 Driver's seat, S22 Armrest for driver's seat, S23 Co-driver's seat, two-seater, SA5 Airbag driver, SA6 Airbag co-driver, SK2 Seat occupancy recognition driver's seat, T16 Sliding door, right, T75 Grab handles for driver and co-driver entry, T77 Grab handle at loading compartment sliding door, partition, T86 Entry handle on rear corner pillar, right, V94 Cable duct on side wall, V95 Cable duct on rear portal, VF7 Fabric Maturin black, W73 Running board, rear door We would be happy to provide you with an offer for the trade-in of your used vehicle. Should you wish to lease or finance your vehicle, we will gladly provide you with an individual of Gbedpfx Alezcknij Usu

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Lenze ABW, thread cutting chuck MK2 Godpfovvt U Ijx Al Usbu -Type: GB2a -Dimensions: Ø 62 x 207 mm -Weight: 1.2 kg

Condition: new, Hidromek HMK230 LC-5! Engine: Isuzu Stage V Engine power: 128 kW Hydraulic pumps: Kawasaki Transport width: 3.09 m Transport length: 10.88 m Transport height: 3.25 m 700 mm tracks 5.7 m boom 2.92 m stick Heated air suspension seat Sun visor Double-acting hydraulics Hydraulics for rotating equipment Quick-coupler hydraulics Hose rupture valves Overload warning Smartlink FOPS2 Full warranty: 3 years / 3000 hours Auxiliary heater Central lubrication system Electric fuel pump Camera - side and rear view Cool box "refrigerator" Radio A/C Favorable financing can be arranged through Nordea Finance! The machines can be equipped with Rototilt and Engcon Oil quick couplings. In addition, we can customize the machine completely according to your requirements! Favorable financing can be arranged! GT trading is the importer of Hidromek and Airman machines in Sweden. We always have used construction machines in stock, and we are currently looking for used Cat and Volvo machines. Visit us: Ullevivägen 30, Bro, Stockholm, 19740 Borrvägen 12, Nacksta, Sundsvall, 12853 Contact us for more information! Josef Said: Henrik Törnblom: 00 39 Technical data: Year of manufacture: 2026 Weight: 25,000 kg Engine manufacturer: Isuzu Emission stage: Stage V Drive type: Diesel Track width: 70 cm Location: Bro, Stockholm County, Sweden Gbedpfx Aloz Rpy De Uju

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL woodturning lathe with a center distance of 800 mm. The demonstration machine is in its original condition, so you receive full warranty. Technical data - Center height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning device!) - Center distance approx. 800 mm (extendable!) Gjdpfxstpxx Ie Al Usbu - Spindle fitting M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale), trapezoidal-thread leadscrew - Motor: 2 HP - Weight: approx. 290 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight forwarder: Austria: € 125 incl. VAT Germany: € 150 incl. VAT South Tyrol: € 180 incl. VAT Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, woodturning tools, wood spinning, turning, machine Reference: R-A0117

Condition: ready for operation (used), Year of construction: 1975, Column drill press Manufacturer: CORDIA, Type: S-18, Year of manufacture: approx. 1975 Drilling capacity in steel: max. 18 mm Spindle mount: MK2 Spindle speeds: 90 - 1450 rpm Spindle stroke: 120 mm Gbjdpfxohtri Es Al Ueu Table: 350 mm x 400 mm clamping surface; 270 mm x 320 mm Space required: Width 420 mm, Depth 650 mm, Height: 2000 mm Weight: approx. 350 kg Machine is ready for use.

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a Gbedpeuu U T Sofx Al Uou -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister STRATOS ECO woodturning lathe with a center distance of 680 mm. The demonstration machine is in original condition, therefore you receive the full warranty. Technical Data - Center height approx. 230 mm - Machining diameter approx. 455 mm (with optional outboard turning attachment up to 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle mount M33 x 3.5 with ASR (Euro) anti-release groove* Gedpfx Aletpxt Ro Usbu - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection: 230 V) - Weight: 177 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipment rates: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: woodturning lathe, lathe, turning bench, woodturning bench, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. Gedpfx Asvt Tn Ael Ujbu - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds Gedpfx Alevupa Rj Usbu - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: good (used), quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert -Quick-change chuck holders: 18 pieces, without: arbor -2x sleeve: MK1 -7x sleeve: MK2 -6x sleeve: MK3 -3x sleeve: MK4 -Mounting: Ø 42 mm -Price/Delivery: complete -Transport dimensions: 300/200/H170 mm Gsdpfx Aewa Invsl Ujbu -Complete weight: 21 kg

Condition: good (used), loading space length: 8,700 mm, loading space width: 1,620 mm, loading space height: 2,100 mm, Year of construction: 1993, General information Field of application: Construction Drivetrain Type of fuel: Hybrid Weights Empty weight: 2.450 kg Functional Lifting capacity: 200 kg Lift height: 2.300 cm Working height: 2.500 cm CE mark: yes Condition Technical condition: good Visual appearance: good Gjdpfx Aozy I U Hsl Uobu Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1140 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-09-20 Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: good (used), functionality: fully functional, tool type: SK 40, SK40 cutting wheel holder 4 pieces of tool holders / cutting wheel holders / backing wheel holders for cutting wheels / backing wheels / backing blades in size SK 40, suitable for the tool changing device / tool holding device in good used condition 1 x Ø 31.75 x 120 for disc cutting wheel 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell cutting wheel 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell cutting wheel, special holder with centric mounting bore Ø9.9 for additional tool clamping device Gbedpsikvwqjfx Al Uou 1 x MK2 for shank cutting wheel Price negotiable Our asking price is €1,190 for the set, net, ex works, plus packaging costs. matching Lorenz clamping fixture for SK 40 tools All technical specifications are subject to typographical errors and errors. We only sell to countries within the European Community.

Condition: used, Quick-change drill chuck with inserts for holding drilling, reaming, countersinking, and threading tools. Tool holder - quick-change holder - quick-change chuck Type SF 46 MK4 presumably a West German product similar to BILZ / MAYSSO Gbedpfx Aoz It Rmol Uou Tool holder: MK4 - only suitable for vertical use (sleeve is locked by its own weight) - suitable for clockwise and counterclockwise rotation Insert sleeve diameter: 46 mm 3 pieces of insert sleeve MK2, length = 105 mm 3 pieces of insert sleeve MK3, length = 109 and 122 mm 3 pieces of insert sleeve MK4, length = 135 mm - Quick-change system for drilling and radial drilling machines as well as CNC drilling machines - various operations can be performed with very quick tool changes in a single workpiece setup - with dual ball clamping system for secure torque transmission and play-free seating of the inserts in the chuck - Not suitable for radial loads, e.g., milling, and tensile loads, e.g., back-countersinking. Weight: 14 kg good condition The inserts can be quickly changed without any auxiliary tools and are automatically locked when inserted into the chuck. The inserts are unlocked by axially shifting the switching sleeve. The tool change can be performed with the spindle both stationary and rotating. Short insertion and retraction distances of the inserts allow for tool changes in seconds. The quick-change system can be used vertically for both clockwise and counterclockwise rotation.

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Tapping chuck: MK2 mount -Type: MK2 M10-12 Godpfjwa Nymex Al Usbu -Bore: Ø 14 mm -Dimensions: Ø 87 x 248 mm -Weight: 4 kg