Used Moulding for sale (1,523)

Condition: good (used), Year of construction: 1990, functionality: fully functional, working width: 250 mm, planing height: 125 mm, spindle diameter: 35 mm, GUILLIET four-sided planer with 250 mm table width, reinforced motors, long table Njdpfxsy Sk Ayj Almolf

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Nlodpfx Ajzt Slpelmof

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Nodpfxozv S D Re Almjlf Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. Nlodpfxozv S Dqe Almof -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Year of construction: 2008, condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1 × core pull preparation AS. Documentation available. An on-site inspection is possible. Nljdpfx Alszvginemef

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: Njdpfxjwm Iy Eo Almelf ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. Nsdpfxszrl A Eo Almelf 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Nedpequ Sc Hofx Almslf Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: used, Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, injection pressure: 1,632 bar, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm Nedpfx Aljzgt Rysmslf opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Njdpfx Alsw Hc Spomolf Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN Nsdozv S Aajpfx Almolf 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures. Nodpsw E E Evjfx Almolf

Condition: excellent (used), For sale: Guilliet KXK four-sided planing machine Very well-maintained, from a one-man carpentry shop Year of manufacture: 1995 Max. planing width: 180mm Max. planing height: 120mm Length of feed table: 2100mm Tool diameter: 100mm Motor powers: Surfacing cutter: 3.7 KW Right cutter: 3.7 KW Left cutter: 3.7 KW Thicknessing cutter: 3.7 KW Feed motor: 1.0 KW Motor power for height adjustment: 0.37 KW Motorized adjustment of the feed bar with the thicknessing cutter Dust extraction connections: Nlsdpfxezivf Ss Almef Surfacing and thicknessing: each 160mm Left and right cutters: each 120mm

Condition: used, Year of construction: 2000, Used Weinig U23E with 6 spindles: Nljdjzuartepfx Almef 1. Lower spindle, 5.5 kW motor 2. Right spindle, 11.0 kW motor 3. Left spindle 4. Upper spindle, 7.5 kW motor 5. Upper spindle, 7.5 kW motor 6. Lower spindle, 7.5 kW motor Feed speed 5-24 m/min, motor 2.2 kW.

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Nledpjzp R Izefx Almof delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2009, LEADERMAC SPEEDMAC 923SP SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (11 KW) - OUTBOARD BEARING RIGHT (11 KW) - LEFT (11 KW) - RIGHT (11 KW) - PROFILE JOINTER LEFT (11 KW) - PROFILE JOINTER TOP (15 KW) - OUTBOARD BEARING BOTTOM (22 KW), TOP (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER Nodpjzv S Ddefx Almjlf BOTTOM (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER WORKING WIDTH: 230 MM, HEIGHT: 160 MM. MAX FEED SPEED 60M/MIN (POSSIBLE TO INCREASE IF NEEDED) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 7 Spindle arrangement: bottom, right, left, top, bottom, top, left Diameter of the dust extraction port: 7x120 mm Adjustable feed rate: 4-24 m/min Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 2550 mm Nlsdpfx Aljzgup Rsmof Width: 1050 mm Height: 1200 mm

Condition: good (used), Year of construction: 2006, operating hours: 65,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, Hydraulic core pull 2x Hot Runner 4x Nledpfx Aotqifnolmef Air valves

Year of construction: 1991, condition: ready for operation (used), A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible. Nedpfxoztra Hj Almslf

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. The machine is still in operation and can be demonstrated. Further technical details will follow in the next few days... Nljdeyyw Ufepfx Almjf

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING Nlsdpfx Aezv Sz Nslmof BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Nodpjw S Ewqefx Almslf Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Year of construction: 2004, condition: used, A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible. Nsdpfxezvy E Ao Almelf

Condition: excellent (used), Year of construction: 1995, operating hours: 1,234 h, functionality: fully functional, 1 GUBISCH - window production line type CENTROMAT-CD-SUPER (output 3 - 4 parts per minute. Number of units to be produced in 8 hours, approx: 200 pieces) with the following machine components: 2 cross-cut saws > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 piece > Spindle speed: 3000 rpm > Tool diameter max.: 350 mm > Motor power: 3 kW 2 left and 2 right vertical slot spindles > Number of tools: 3 pieces > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 3 profiling spindles vertical right > Number of tools: 3 pieces > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 Profiling spindle vertical left Njdpfx Aov A It Selmjlf > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW Other features: > Online capable: yes > Double parts package: yes > Screen control: yes Detailed description on request.

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Manufacturer: Hofmann Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Njdpfx Aeztzntjlmjlf Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Vertical adjustment: 145 mm Tool holder: MK5 Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle