Used Mubea Kl 100 for sale (96)

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Dkodpfew U T Uvjx Al Uon

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors Dksdpfx Aefkmr Sjl Ujn (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds Dkodpfxoxu Dxqo Al Uon -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min Dksdpfx Alou Ickye Uon height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, sheet width - max.:200 mm plate thickness:4 mm dimensions of the machine ca.:0,90 x 0,50 x 2,70 m Dodpfxjcxxn Ee Al Uokn

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Dksdpfx Aoq Iyvvsl Uen Holes e.g. 30 mm diameter in 20 mm flat iron Quick-change device Assortment of tools is included in the price Weight: 3.000 kg

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear Foot switch for lift release Quick change device Dodpfxslf Trks Al Uokn Assortment of tools is included in the price

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Djdpfxor R Auzo Al Uskn Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Assortment of tools is included in the price

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Djdpfx Aot Exprsl Uekn Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: used, functionality: fully functional, Combined profile shear (ironworker) for metalworking. Punches, cuts, notches, and severs structural steel (angles, flat bars, round bars, square bars) in a single machine. Robust East German/West German industrial design – extremely durable, easy to maintain, no high-tech frills. Features a large base plate and multiple workstations. Ideal for locksmiths, steel construction companies, metalworkers, blacksmiths, training workshops, or well-equipped hobbyists with sufficient space. A comparable new machine costs well over 15,000 EUR. Dodpfx Alszabv Se Uskn Technical data: - Design: Combined profile shear with multiple stations (punching, shearing, notching, profiling) - Drive: Three-phase motor 400 V - Shear blades: included - Punching tools: included (see photo) - Steel base plate: cast, very stable - Machine weight: approx. 1,500 - 2,500 kg - Year of manufacture: approx. 1970s-1980s Collection / Transport: Self-collection with a heavy-duty forklift (>= 5 tons) or crane. Loading on site is possible. Shipping via a low-bed trailer is available by arrangement.

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Price negotiable Dkodpfxey Tivuo Al Uon

Condition: used, functionality: fully functional, machine/vehicle number: 0159689206365, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender KLH 500/610 Dodpfxoy Tit To Al Uokn Price negotiable.

Condition: used, functionality: fully functional, machine/vehicle number: 1028789976479, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender Price negotiable Dksdjy Tip Iepfx Al Usn

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: VP600 760 01, used Mubea VP 600/760 Dkjdpfx Alsy Tihwo Uen Price: VP

Condition: excellent (used), functionality: fully functional, control type: manual, working width: 500 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Sheet width - max. 500 mm Dksdpfewvvvgex Al Usn Sheet thickness: 3 mm Blade length: 500 mm

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Dkodpsncc Huofx Al Uen Dimensions: 200x75x197 cm LxWxH

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included Dodjd Ih Stepfx Al Uekn For further information please see brochure.

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Required space: 300 x 170 x 680 mm Dedpjhtq Hfjfx Al Uekn Weight: 32kg

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm Dedpfjtx Uqasx Al Uekn square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: used, Year of construction: 1984, hole diameter in sheet thickness Ø 30 in 12 mm hole diameter in sheet thickness Ø 19 in 19 mm Dkjdpoyv N Ebsfx Al Usn pressure capacity max. 45 to weight of the machine ca. 1.700 kg

Condition: used, pressure 40 t throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm Dkedpfxsyv Nuij Al Ujn

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm Dsdpfjy Ddv Rex Al Uokn - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: good (used), Year of construction: 1999, Hydraulic steel bar shears with hole punch Fab. MUBEA Typ. HIW 750/510 Year 1999 Dedpeu Sy Uzefx Al Uekn Technical data Make Mubea Type HIW 750/510 Year of manufacture 1999 Punching pressure 75,000 kg Max. Hole capacity diam. 30 x 22 mm Stroke 70 mm Max. Stroke rate 42/min. Working radius 510 mm Flat steel 450 x 15 mm / 300 x 20 mm Angle steel 150 x 13 mm Square steel 44 mm Round steel diam. 50 mm Installation dimensions L 2.0 x W 1.40 x H 1.80 m Weight approx. 2.5 t Equipment - Electrical contact stop 2000 mm - Tool cabinet - Various tools and accessories as per photos All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg Djdpfx Aleiqhg Us Uskn

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm Djdpfxsrll I Ue Al Ujkn - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable