Used Illig Ua 100 for sale (44)

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Hodjwf Dvaepfx Aaqsw Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Hodpfx Aotv Ivzoaqjw Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Year of construction: 1971, condition: ready for operation (used), A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible. Hjdpfx Ajwixyhoaqow

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 1594, TECHNICAL DETAILS Machine number: 1594 Year of manufacture: 1993 Voltage: 3~220 V, 50 Hz Hodpfx Aasww Igysqew Motor power: 3.52 kW Heating capacity: 216.0 kW Rated operating current: 86.5 A Permissible air pressure: 10 bar

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators > Upper stamping system > Protective grille > 4 cooling fans D05 Hjdpfx Aajfug Aneqjw > Automatic pre-blowing and demoulding

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Hjdpfxst Iracs Aaqsw Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1531, operating temperature: 650 °C, plate length: 1,000 mm, plate width: 700 mm, TECHNICAL DETAILS Film width: 700 mm Type of input current: AC Input voltage: 400 V Sheet thickness: 10 mm Sheet dimensions: 1,000 x 700 mm Operating temperature: 650°C Pump capacity: 100 l/min Vacuum pump power: 3,000 W Compressed air connection: 6 bar Form height (min.): 300 mm MACHINE DETAILS Overall width: 700 mm Overall length: 3,500 mm Overall height: 3,500 mm Control cabinet width: 1,000 mm EQUIPMENT - Top heating 3 pilot burners, bottom heating 1 pilot burner - Motorized adjustable height of counterform - Quick clamping of upper and lower frame - Quick tool clamping on the lower table - Quick tool clamping on the upper table - Control of underfilm sag - Bubble formation with electric photocell - Storable bubble and demolding intensity, pneumatic valves in cascade - BUSCH vacuum pump 100 meters/cubic meter Hsdpfswr Ab Usx Aaqjw

Condition: ready for operation (used), Year of construction: 1990, operating hours: 45,353 h, functionality: fully functional, machine/vehicle number: 1537, product height (max.): 10 mm, plate length: 1,000 mm, plate width: 700 mm, Hybrid machine for thermoforming films or coils TECHNICAL DETAILS Hedpfjwr Abzox Aaqsw Maximum width: 700 mm Maximum plate: 1,000 x 700 mm Maximum sheet thickness: 10 mm Heating power: 31.1 kW Motor power: 5.59 kW EQUIPMENT - Plate loader type BE without preheating - Coil unwinding device type PR - Upper and lower table - Schleicher PDPF control director - Quick clamping of reduction frames and tools

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1506, film width: 1,000 mm, type of input current: three-phase, pressure: 6 bar, total width: 700 mm, total length: 1,000 mm, total height: 350 mm, input voltage: 400 V, sheet thickness (max.): 10 mm, heating capacity: 30 kW (40.79 HP), overall weight: 1,500 kg, tool height: 490 mm, Machine type: ILLIG UA 100 G Machine number: 1506 Manufacturing year: 1988 Total weight: approx. 1,5 tonns Power supply: 3x400V Total power consumption: 35 kWh Total (lower and top) heating: 30 kWh Type of the heating plate: ceramic Sheet size max.: 1000x700 mm Sheet size min.: 310x210 mm Sheet thikness max.(manual loading): 12 mm Forming area max: 960x660 mm Forming area min: 270x170 mm Height of formed part positive: 350 mm Height of formed part negative: 350 mm Max. tool height: 490 mm Hedpfxewfdd Ds Aaqew Around 2020, the machine underwent a refurbishment. It received a new Omron control system to replace the original Schleicher, and we also refurbished the cabling and electrical cabinet.

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames Hjdoxlzrcepfx Aaqew - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Year of construction: 1998, condition: used, ILLIG UA 225 ED thermoforming machine Sheet forming machine Hjdpfxsxg I Duo Aaqjw Thermoforming machine / Sheet forming machine Make : ILLIG Type : UA 225 ED Year of manufacture : 1998 Operating hours : 40.191 Working area : 2.200 x 1.200 mm Condition : The machine is still under power and was in use until June 2024. The sale is due to insolvency.

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 191, type of input current: three-phase, pressure: 10 bar, total width: 3,050 mm, total length: 2,400 mm, total height: 3,480 mm, control cabinet width: 850 mm, control cabinet height: 1,800 mm, control cabinet length: 600 mm, This machine was overhauled in 2020 and installed at a customer and was not or hardly used. Machine is in excellent condition. Has been professionally disconnected and transported. Hsdewpfrkopfx Aaqow

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features Hedpfxoxlzqfo Aaqsw - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: Hedpfxewf Eb Re Aaqjw - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Loading - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: reconditioned (used), functionality: fully functional, Max. forming area 960 x 660 mm Min. forming area 269 x 444 mm Max. sheet thickness (manual loading) 12 mm Max. sheet thickness (automatic loading) 10 mm Max. tool height 450 mm Year of manufacture 2000 Technical features of forming station UA 101 L: - Siemens control with swiveling operating panel - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Upper plunger system - Parallel clamping frame - Automatic window plate adjustment, lower frame - Automatic window plate adjustment, upper frame - Vacuum for sub-table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control Hsdpfxjwf Dtxo Aaqsw - 4 cooling fans - Front opening with pneumatic interlock for tool change - Film sag control - Film pre-blow control - Vacuum preparation at the upper plunger - Tempering connection - Automatic tool change system, large setup - Vacuum pump Technical features of loader BE 101 L: - Upper and lower preheating - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Motorized, parallel lifting film transport - Film transport via pin chain - Film guidance with rollers - Automatic transport width adjustment - Motorized sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in upper heater for measuring temperature on film - Retrofit for roll material processing

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: Hsdpfjft S Easx Aaqew > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: reconditioned (used), functionality: fully functional, Plate size: 1250 x 1500 mm Hodpfjwf Ea Tox Aaqjw Forming area: 1200 x 1460 mm Drawing depth: 700 mm If you would like further details or a quote, please contact us.

Condition: reconditioned (used), > Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade. > 4 hold-down devices, new wheels and new bearings. > Machine completely overhauled and new painted. Hsdpjfua Drjfx Aaqjw > Passage width of 600mm > Further details on request.

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Hsdpfxewf Ebwe Aaqow Forming area: 1960 x 960 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us.

Condition: reconditioned (used), functionality: fully functional, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us. Hjdpfx Aaowf D S Ueqjw

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Hedpfowf D R Rsx Aaqjw Drawing depth: 600 mm If you would like further details or a quote, please contact us.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Make Illig Model RV 74 Year 1999 Hours Approx TBC Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Hedexp H Nuepfx Aaqsw Minimum Forming Area 400 x 250 mm Depth of Draw Above-Below 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 20 / min Total Weight 6,600 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 Hedpfx Aaefua Dceqew • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Hodpfxjxm Sa Hs Aaqsw Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Hodpfxsq A Um Rs Aaqow Special equipment: Hollow floor facility available Control cabinet: included