Used Illig Kfg 37 for sale (29)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Bsdpfjq A Um Rox Aftjld Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Bledpfxjq Nn Hce Aftjd The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: ready for operation (used), Year of construction: 2005, Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Bodpfxoylbrkj Aftjld

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand Bledpfx Afjwf Dvaotod

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us. Bodpewf D R Refx Aftjld

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Blodpfxoft S Eas Aftod Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW • Carton feeder • Package ejector Bsdpfxofua Dco Aftold • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Drawing depth: 600 mm Bodpfx Afswf Ebwetold If you would like further details or a quote, please contact us.

Condition: used, functionality: unexamined, For sale here is an Illig Sb 74 D, which is suitable for skinning, blistering not possible. Bledpfswpvbpsx Afted Please request technical data.

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Bledpoxlzqfsfx Aftsd Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station Bjdpexlzrcsfx Aftsld - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators > Upper stamping system > Protective grille > 4 cooling fans D05 Bljdpfx Afefug Anjtsd > Automatic pre-blowing and demoulding

Condition: reconditioned (used), functionality: fully functional, Max. forming area 960 x 660 mm Min. forming area 269 x 444 mm Max. sheet thickness (manual loading) 12 mm Max. sheet thickness (automatic loading) 10 mm Max. tool height 450 mm Year of manufacture 2000 Technical features of forming station UA 101 L: - Siemens control with swiveling operating panel - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Upper plunger system - Parallel clamping frame - Automatic window plate adjustment, lower frame - Automatic window plate adjustment, upper frame - Vacuum for sub-table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening with pneumatic interlock for tool change - Film sag control - Film pre-blow control - Vacuum preparation at the upper plunger - Tempering connection - Automatic tool change system, large setup - Vacuum pump Technical features of loader BE 101 L: - Upper and lower preheating - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Motorized, parallel lifting film transport - Film transport via pin chain - Film guidance with rollers - Automatic transport width adjustment - Motorized sheet lifter with automatic tool clamping - Mobile sheet loading trolley Bsdpfx Ajwf Dtxoftjld Options (price on request): - Pyrometer in upper heater for measuring temperature on film - Retrofit for roll material processing

Condition: reconditioned (used), functionality: fully functional, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Drawing depth: 700 mm Bjdpewf Ea Tofx Aftold If you would like further details or a quote, please contact us.

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Loading - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder Bodpfx Ajwf Eb Roftold - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: reconditioned (used), functionality: fully functional, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us. Bedowf D S Uspfx Afteld

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale Bledpfjuzi I Ejx Aftod

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Make Illig Model RV 74 Year 1999 Hours Approx TBC Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Depth of Draw Above-Below 120 / 40 mm Bsdpfx Ajxp H Nuoftsld Maximum Material Thickness 2.0 mm Maximum Cycle Rate 20 / min Total Weight 6,600 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2006, operating hours: 29,750 h, Stations: Forming, Cutting and Stacking Max Forming Area: 500 x 350 mm Min Forming Area: 300 x 160 mm Film width: 540 mm Height of Forming Above-Below Material Level: 100 / 40 mm Max Mould Closing Force: 55 kN Forming Pressure: 2 bar Cycles/Min: 40 Bledpfsw Rp Eiox Aftjd Total motor power: 32 kW Total heating power: 44,9 kW Rated current: 115 A Dimensions (L x W x H): 8,3 x 2,3 x 2,5 m

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg Bledpfxsft Scce Aftod + 500 kg foil

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Blsdpfjuk Dwfox Aftsd The machine is incomplete and not operational! For spare parts only!!

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 191, type of input current: three-phase, pressure: 10 bar, total width: 3,050 mm, total length: 2,400 mm, total height: 3,480 mm, control cabinet width: 850 mm, control cabinet height: 1,800 mm, control cabinet length: 600 mm, This machine was overhauled in 2020 and installed at a customer and was not or hardly used. Machine is in excellent condition. Has been professionally disconnected and transported. Bsdpfjwpfrkox Aftold

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 1594, TECHNICAL DETAILS Machine number: 1594 Year of manufacture: 1993 Voltage: 3~220 V, 50 Hz Motor power: 3.52 kW Bedpfx Asww Igyjftsld Heating capacity: 216.0 kW Rated operating current: 86.5 A Permissible air pressure: 10 bar

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm Bodpfetv Ivzsx Afteld We take care of dismantling and loading onto your truck, which is available for collection.

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Bedpfjt Iracjx Aftjld Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it