Used Multi Head Drilling Machine for sale (70,840)

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data Cedpfsfriztox Akteri 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg L x W X H 280cm × 150cm × 150cm

Condition: used, MASTERWOOD MULTI-SPINDLE DRILLING MACHINE, 21 spindles, left/right spindles, quick-change clamping system, Cedpfoywwwhox Akteri spindle pitch 32mm, vertical or horizontal drilling, 3 pneumatic clamps, power supply 380V, The machine is fully functional and ready for work.

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Factory No.: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 units Gear ratio: 1:1 Credpfx Ajz Hfcljktoi Spindle spacing (center of spindle to center of spindle, diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collet chucks Overall height from tool holder (bottom) to gearbox housing, outer edge (top): 218 mm - 4 spindle drives with collet chuck holders (collet chucks are not included in the scope of supply) - 4 tool spindles can be adjusted steplessly by rotating within the spindle spacing - Ideal for 4 drill holes in a square arrangement from 32 x 32 mm to 97 x 97 mm Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition

Condition: excellent (used), 21 spindles Crjdpfstrlm Uox Aktji The distance between the spindles is 32 mm 2.5 HP motor

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 891149, 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm Csdpjzcg Ifofx Aktsri

Condition: good (used), Year of construction: 1994, Transport dimension: Cjdpfom Rg Npox Aktori Width: 1500 mm, Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Crjdpezyr Epefx Aktji

Condition: excellent (used), Catalog number: 8071 TECHNICAL DATA Codpszuk Aiefx Aktori - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of the feed cylinder (drilling depth adjustment): 50 mm - Drilling speed: pneumatically adjustable - Drilling angle: manually adjustable - Main motor: 1.5 kW - Side fences: 400 mm - Compressed air requirement: 6-8 bar - Diameter of the dust extraction nozzle: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES - Made in Italy - For 21 spindles – drill mounting with quick-release couplings - Vertical, horizontal, and angled drilling - Unpainted - Used drill press, very good condition Net price: 6900 PLN Net price: 1600 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,600 kg, pressure: 7 bar, Masterwood Speedy TF 2.0 Machine in very good condition Maximum working width: 1000 mm Maximum working length: unlimited Fully equipped Drilling head Saw blade Tool changer Csdpfsz A Trasx Akteri Router ISO30 Masterwork CAD-CAM system Tables with adjustable inclination, front and rear Available from the end of November 2026 Price upon request

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Crodpfx Aezvmvhsktei Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Crjdpjznwq Tofx Aktei

Condition: used, 4-head spindle paper drilling Josef Foellmer IRAM 200 4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200 Year ca. 1984 - Serial-No. 106 Crjdpfs Agpy Ujx Aktei Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 Cedpfx Aksy Tt Rpstjri MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm -Dimensions: Ø 220 x 455 mm Credpfxjwyuu No Aktei -Weight: 27 kg

Condition: excellent (used), functionality: fully functional, power: 1.5 kW (2.04 HP), overall weight: 80 kg, BLUM drilling machine for fittings, with Lohrei series head and 7 spindles. Crodpfo Ah Ibuox Aktsi

Condition: excellent (used), Multi-spindle drilling machine SCM Crodpevxtfrsfx Aktei Type FM 29/S 29 spindles Distance 32 mm Table 1200 x 780 mm Max drilling depth for vertical drilling 100 mm/ horizontal 60 mm Spindle speed 3800/min

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units - 2 vertical units - 4 front-mounted units (two on each side) Crsdpfx Akoxrmptjtji

Year of construction: 1992, condition: excellent (used), 23 spindles Csdpfx Aek Up Itsktori working width 720 mm vertical drilling depth 45 mm horizontal drilling depth 120 mm

Condition: new, Type: BM21S Csdefbubuspfx Akteri Number of spindles 21 Adjustable drilling angle Working width 700 mm Table dimensions 1000×900 mm Additional support fence 3000 mm Number of clamps 2 Motor power 1,5 kW 380 V 50 Hz Working air pressure 8 bar Drilling step 32 mm Weight 150 kg Transporting dimensions 1200x1000x1300 mm

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Codpfxertrx Re Akteri Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: good (used), Year of construction: 2000, The upper drill head is missing. Working height: 1030 mm, Height: 1680 mm, Depth: 1800 mm, Codpot Aifxefx Akteri Width: 2450 mm

Condition: good (used), Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: N° 21 spindles - Centre distance mm 32 Csdpoyrrhiofx Akteri Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: Crjdpfez Df Txsx Aktsi - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Year of construction: 1994, condition: used, Dimensions: Credslp Iibepfx Aktei H = 1600 mm L = 1200 mm D = 1100 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10649 Manufacturer: JUARISTI Type: TX1D Year of construction: 2008 Type of control: CNC Control: Heidenhain TNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 4000 mm Y-Travel: 2500 mm Z-Travel: 2000 mm B-Axis: 360 ° C-Axis: 0,005 ° Rotary Table (Lxw): 1600 x 3000 mm Table Load: 4000 kg Tool Taper: SK50 Numbers Of Tools In Magazin: 100 Spindle Speed: 3500 RPM Drive Capacity - Spindle Motor: 25 kW Further information: - Weight limit for milling ⁓ 4000 kg - X-axis with rotary table and swivel head Cjdj Ahw N Sjpfx Aktjri - 3 indexing tables, approx. 200 - Internal coolant supply (IKZ) is standard - Welding stand capable of welding and powder coating up to 6.3 t and 10 m in length with a 2 x 2.5 m cross-section The machine can be viewed while powered on by prior arrangement.