Used Multi Spindle Lathe for sale (19,257)

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm Dsdpfxjvtp Edo Aarswd >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible. Dedpfx Asxaphnoarswd

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Dwsdpfexaphujx Aarjd

Condition: new, Bernardo Universal Lathe Titan 560 x 2000 Pro Vario Technical Specifications Center Distance: 2000 mm Center Height: 280 mm Swing Over Bed: 560 mm Swing Over Gap: 785 mm Swing Over Cross Slide: 350 mm Bed Width: 350 mm Spindle Bore: 105 mm Spindle Mount: DIN 55029, D1 – 8 Speed Range: 25 – 220 / 220 – 1500 rpm Longitudinal Feed Range (42): 0.055 – 3.061 mm/rev Cross Feed Range (42): 0.025 – 1.384 mm/rev Metric Threads (41): 0.1 – 14 mm Inch Threads (60): 2 – 112 TPI Quill Diameter: 75 mm Quill Travel: 185 mm Quill Taper: MK 5 Motor Power: 7.5 kW (10.0 HP) Machine Dimensions Length: 3340 mm Width x Height: 1150 x 1610 mm Weight approx.: 2720 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with digital readout of set speed • Versatile applications in general engineering, production, one-off manufacturing, etc. • Removable gap bridge for machining large-diameter workpieces • Standard rapid traverse in longitudinal and cross directions for reduced non-productive times • Modern main spindle bearing with angular contact ball bearings in precision design • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, ensuring a key requirement for precise turning • Tailstock offset for taper turning • Central lubrication for the carriage Scope of Delivery • 3-axis ES-12 V digital readout with LCD display • 315 mm / D8 3-jaw chuck PS3 • Fixed steady rest – max. passage diameter: 180 mm • Follow steady rest – max. passage diameter: 120 mm • Foot pedal with braking function (CE compliant) • Safety guard for quick-change toolpost • LED machine light • Initial fill with Shell Tellus 46 • 450 mm face plate Dwedpfxsxl Tc To Aarsd • 2 live centers • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant device • Quick-change toolpost with 4 holders • Change gears • Reducing sleeve • Chip guard • Operating tools

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Dwjdpfx Aasx Dzxajred Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: new, Bernardo Goliath 500 x 1500 Production Lathe Technical Specifications Centre distance: 1500 mm Centre height: 250 mm Swing diameter over bed: 500 mm Swing diameter over gap*: 720 mm Swing diameter over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (24 steps): 9 – 1600 rpm Longitudinal feed range (80 steps): 0.063 – 6.43 mm/rev Cross feed range (80 steps): 0.027 – 2.73 mm/rev Metric threads (46): 1 – 224 mm Inch threads (44): 1/8 – 28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L x W x H): 3020 x 1240 x 1550 mm Weight approx.: 3285 kg * Removable gap bed section length: 200 mm Features • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • One-piece cast machine bed ensures maximum rigidity and minimal vibration, providing the essential prerequisite for precise turning • Modern precision angular contact ball bearing spindle bearings • Central, user-friendly feed and thread control, with lead and feed shafts • Rapid traverse in longitudinal and cross directions as standard to reduce idle time • Large-dimension, hardened and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with fine graduation (0.02 mm) • Electromechanical foot brake to minimise non-productive time • Excellent cutting performance, even during facing operations Scope of delivery • Slip clutch • Rapid traverse longitudinal and cross • LED machine lamp • 3-axis digital readout ES-12V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 400 mm • Fixed steady rest – max. through diameter 200 mm • Follow rest – max. through diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake as per CE standards • Foot pedal with brake function as per CE • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post Dwsdpfx Aaexl D Aksrsd • Reducing sleeve • Chip guard (rear) • Operating tools

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Dwedpozwg Tiofx Aared Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm Dwjdpfxexpuu Ee Aarod 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Center height : 250 mm Center width : 1500 mm Dwedpfx Aasu Rd H Iorjd spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: new, Bernardo universal lathe Solid 460 x 1000 Pro Center width 1000 mm center height 230 mm Swing diameter over bed 460 mm Swing diameter over offset 690 mm Swing diameter over cross slide 270 mm Bed width 300 mm Spindle bore 80 mm Spindle holder DIN 55029, D1-8 Speed range (12) 25 - 1700 rpm Range of longitudinal feeds (42) 0.055 - 3.065 mm/rev Face feed range (42) 0.025 - 1.386 mm/rev Metric threads (41) 0.1 - 14 mm Inch thread (60) 2 - 112 Gg/1" Quill diameter 60 mm Quill travel 130 mm Quill holder MK 4 Motor power 5.5 kW (7.5 HP) Machine dimensions (W x D x H) 2300 x 1080 x 1600 mm Weight approx. 1675 kg Machine features - Modern main spindle bearing with angular contact ball bearings in precision design - Hardened and ground gears and shafts, also in the feed gearbox - Central, handy control for feeds and threads with lead and feed spindles - The gears are large, hardened and precision-ground - The speed and feed adjustment is simple, smooth-running and precisely switchable - Longitudinal and flat rapid traverse as standard to reduce idle times - The machine bed, cast in one piece, is extremely torsion-resistant and low-vibration, thus fulfilling an essential requirement for precise turning Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diam. max. 150 mm Dwjdoqwkd Uopfx Aared - Rotating steady rest - passage diam. max. 110 mm - Quick-change steel holder with 4 inserts - Safety device for quick-change steel holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slipping clutch - Longitudinal and flat rapid traverse - Interchangeable wheels - 2 centering points - Reducing sleeve - Thread clock - LED machine light - Chip back plate - Operating tool

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Dwsdpfx Aoz Agz Doarsd Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Dodpfxsz Agzdj Aarowd Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information Dwsdpoz R Dt Esfx Aarsd VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units - 2 vertical units - 4 front-mounted units (two on each side) Dsdpfexrmptsx Aarswd

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 4 [mm] - Travel : 24 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1580 x 1100 [mm] Dsdpfx Aozzfk Isarjwd - Machine height : 1505 [mm] - Machine weight : 800 [kg]

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Dedovl Ig Dopfx Aarowd

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Dsdpfx Aasygw Svjrswd

Condition: good (used), Year of construction: 2000, machine/vehicle number: 8073, Offer 25432 Technical specifications: - Swing diameter: 320 mm Dwodexx Sp Espfx Aarod - Distance between centers: 750 mm - Maximum turning diameter over bed: 550 mm - Maximum turning diameter over cross slide: 175 mm - Spindle bore: 32 mm - Spindle mount: - Tailstock quill taper: MT 3 - Quill stroke: 180 mm - 18 spindle speeds: 85 - 2000 rpm - Longitudinal and cross feeds - Metric thread pitches - Imperial thread pitches - Module threads - Diametral pitch threads - Quick-change tool post - Chuck - Steady rest - Drive: 400 V / 2.2 kW - Required space (approx.): W 2100 x D 750 x H 1300 mm - Weight (approx.): 750 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 8,000 rpm, turning diameter: 18 mm, controller manufacturer: Siemens, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter: 18 mm (16 mm) Spindle speed: 800 - 8,000 rpm Dodpfx Asyxmrqearewd Spindle circle diameter: 180 mm Main spindle drive power: 11 kW Torque: 18 Nm Bar feeder capacity: max. 80 mm Longitudinal slide travel: 50 mm (63 mm) Cross slide travel: 20 mm (32 mm) MACHINE DETAILS Control: Siemens Dimensions & Weight Space requirement approx.: 6.0 x 1.5 x 2.2 m Machine weight approx.: 5.5 t EQUIPMENT CO2 fire extinguishing system by Kraft&Bauer Ruez scraper belt conveyor IEMCA bar feeder PRA 52 42 F Tool package Cam package Various clamping devices Documentation Chip conveyor Coolant unit Parts discharge chute Signal lamp Interface for bar feeder Hydraulic unit

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each 1 horizontal 21 spindles Dsdpfjih H Epsx Aarowd 2 vertical 21 spindles pneumatic clamps

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -comes from an Alberti drilling rig -max.: 18x drill Dodpfx Aecp Txpearswd -Admission: -alternately turning right/left -Distance drill: 50 mm -Distance drill: 25 mm -Number: 2x drilling heads available (1x left/1x right) -Price: per piece -Dimensions: 1090/380/H580 mm -Weight: 210 kg/piece

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Dwedpfx Asxp Rvljarjd

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Djdpfxsxp Ru Ue Aarowd

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Djdpexziuwefx Aarewd Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Factory No.: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 units Gear ratio: 1:1 Spindle spacing (center of spindle to center of spindle, diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collet chucks Overall height from tool holder (bottom) to gearbox housing, outer edge (top): 218 mm - 4 spindle drives with collet chuck holders (collet chucks are not included in the scope of supply) - 4 tool spindles can be adjusted steplessly by rotating within the spindle spacing - Ideal for 4 drill holes in a square arrangement from 32 x 32 mm to 97 x 97 mm Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Dwedpfoz Hfcljx Aarsd Good condition