Lead/traction spindle lathe

Bernardo Solid 460 x 1000 Pro

Condition: new, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications - Distance between centres: 1000 mm - Centre height: 230 mm - Swing over bed: 460 mm - Swing over gap: 690 mm - Swing over cross slide: 270 mm - Bed width: 300 mm - Spindle bore: 80 mm - Spindle mount: DIN 55029, D1-8 - Spindle speed range: 25 – 250 / 250 – 1700 rpm - Longitudinal feed range (42 rates): 0.055 – 3.065 mm/rev - Cross feed range (42 rates): 0.025 – 1.386 mm/rev - Metric thread pitches (41): 0.1 – 14 mm - Inch thread pitches (60): 2 – 112 TPI - Quill diameter: 60 mm - Quill travel: 130 mm - Quill taper: MK 4 - Motor power: 5.5 kW (7.5 HP) - Machine dimensions (W x D x H): 2300 x 1080 x 1600 mm - Weight: approx. 1730 kg Features • Modern headstock spindle bearing with precision angular contact ball bearings • Standard-equipped with Delta frequency inverter for high torque at low speeds and near-constant speed under load • Infinitely variable speed control; set speed is shown on the digital display • Hardened and ground gears and shafts, including in the feed gearbox • Standard longitudinal and cross rapid traverse for minimized idle times • Central, user-friendly controls for feeds and threading, with leadscrew and feed rod • Large-size gears, hardened and precision-ground • Simple, smooth and precise speed/feed adjustments • Machine bed is one-piece cast, extremely rigid and low-vibration for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display Dodsxl Tcajpfx Agcowf • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 tool holders • Safety guard for quick-change toolpost • Foot pedal with CE-compliant braking function • Coolant system • Frequency inverter • Slip clutch • Longitudinal and cross rapid traverse • Change gears • Reducing sleeve • 2 dead centres • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Dwsdpsuccw Hefx Agcjf Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: new, Optimum OPTIdrill D 23Pro (400 V) special offer set bench drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 680mm Column diameter 73mm Width/depth (product) approx. 350mm Height (product) approx. 1015mm Weight (net) approx. 63.5kg Drilling capacity Drilling capacity steel (S235JR) 25mm Continuous drilling capacity steel (S235JR) 20mm Drilling table Drilling table work surface length 280mm Drilling table work surface width 245mm Drilling table T-slot size 12mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drilling table max. 425mm Speed range Speed range 200 - 2440min¯¹ Number of speed ranges 12 Electrical data Drive motor power 0.75kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max. 618mm Machine foot working surface length 240mm Machine foot working surface width 250mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 170mm Dodpfx Aot N Ivvsgcowf Spindle Quill stroke 80mm Spindle holder MK2 throat 180mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 2/B16 T-nuts Machine vice BMP

Condition: new, Bernardo Center and lathe master 180 incl. 3-axis digital display Top width 1000 mm Tip height 180 mm Swing over bed 360 mm Swing over bend * 480 mm Swing over cross slide 220 mm Bed width 185 mm Spindle bore 51 mm Spindle mount DIN 55029, D1-5 Speed range (8) 70-2000 RPM Range of longitudinal feeds (32) 0,052-1,392 mm / Rev Area plan feeds (32) 0.014 - 0.380 mm / Rev Metric threads (26) 0.4-7.0 mm Inch thread (34) 4-56 Gg/1 " Quill diameter 42 mm Quill trail 110 mm Spindle mount MT 4 Dedpsd Du Tisfx Agcowf S1 engine power output 100% 1.5 kW (400 V) Motor power S6 40% 2,2 kW (400 V) Machine dimensions (W x D x H) 1920 x 750 x 1600 mm Weight approx. 540 kg Bed length removable: 225 mm Scope of delivery • 3-axis digital display i200 with LCD display • 3 - jaw Chuck DK11-200 mm / D5 • Face plate 200 mm / D5, according to DIN 55029 • Fixed bezel - forward diam. maximum 70 mm Diam bezel with • ongoing - forward. maximum 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Pull-out chip tray • Face plate 320 mm • Four-way steel bracket • protective device while the four-way tool post • Slipping clutch • Mikrometerlängsanschlag • Thread watch • LED machine luminaires • Reducing bushing • Change gears • 2 centres • Foot pedal with brake function after CE • motor with magnetic brake according to CE standard • base

Condition: used, Saimp KS Iron Lathe. Dwjdpfxev Sth Hj Agcef Max piece length 1000mm

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000 Dwjdpfsvzghrsx Agcof

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm taper MK 5 MK Dwsdpfx Asw Tdx Nsgcsf table-size 660 mm feeds 0,1-0,14-0,2-0,28-0,4 . mm/U turning speeds 40 - 800 U/min total power requirement 4,0 KW weight of the machine ca. 1,4 t dimensions 1,2 x 0,8 x 2,59 m Pillar drill with: - Feed - Left/right rotation - Variable spindle speed - Coolant pump

Condition: excellent (used), Year of construction: 1972, Precision lathe, turning machine, lathe, center and feed lathe, center and feed lathe -Manufacturer: VDF Heidenreich & Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Turning Ø over bed: 500 -Turning Ø over recess: 355 mm -Turning Ø over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x steady rest, 7x Multifix tool holder, see photos -Dimensions: 1180/3050/H1345 mm Dwjdow Sxgxepfx Agcof -Weight: 1907 kg

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Dodpfx Ajrtd Uwegcewf Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW Dwsdpjpy Eldsfx Agcef number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in