Used Multifunction Copier Printer Scanner for sale (6,236)

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. Lasdpfx Akswktwkjqoh The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: good (used), mileage: 19,925 km, power: 84 kW (114.21 HP), first registration: 10/2024, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,130 mm, total width: 2,020 mm, total height: 2,840 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/Cassette - Rear view camera - Lane keeping assist - Blind spot sensor - Partition = Notes = Number of axles: 2, Configuration: 4x2, Payload: 1170 kg, Unladen weight: 2030 kg, Gross vehicle weight: 3200 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Trailer coupling, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/Cassette, Carplay, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 84 kW (113 hp), Number of cylinders: 4, Displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drivetrain technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Leather, Seat adjustment: Manual, MBUX | RWD | Camera | Cruise Control | New Model | Tow bar | Multifunctional steering wheel |, Spare wheel, Tire type: Summer tires = Additional Information = General information Number of doors: 1 License plate: V-47-RHX Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Unladen weight: 2,030 kg Payload: 1,170 kg GVWR: 3,200 kg Functional Loading area height: 61 cm Ljdpozqq Ecjfx Akqeah Interior Upholstery: Leather Maintenance APK (Technical Inspection): Valid until 10.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €448 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: ready for operation (used), A portable optical Creaform 3D laser scanner is offered. Accuracy: 0.03mm, volumetric accuracy: 0.02mm + 0.06mm/m, resolution: 0.05mm, measurement rate: 480000/s, scanning area X/Y: 275mm/250mm, stand-off distance: 300mm, depth of field: 250mm, weight: 0.85kg. Including HP ZBook, Windows 10 and approx. 50 packs of positioning targets. Calibration at Creaform passed on 16 December 2020. Inspection possible by appointment. Lasdpfszmh S Sex Akqsh

Condition: ready for operation (used), An inkjet-based industrial PolyJet/material jetting 3D printer Keyence for photopolymers is available. Build volume dimensions X/Y/Z: 297mm/210mm/200mm, resolution: 635dpi/400dpi, XY resolution: 63.5µm/40µm, layer thickness range: 15µm-30µm, machine dimensions X/Y/Z: approx. 950mm/700mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Lasdpfjy Anunjx Akqjh

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Spare Components: Lsdpfx Asy S Rp Hjkqoah 2 x polyjet print head spares (new) 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Year of construction: 2010, condition: repair required (used), functionality: limited functionality, controller model: MTT AutoFab, inner dimension height: 250 mm, laser power: 400 W, machine/vehicle number: SLM2501004, laser type: fiber laser, Equipment: dust extraction, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete and the laser has been replaced by the manufacturer. However, the printer has limited functionality with regard to focus quality at the edge areas, which is presumably due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Adjustable output power: 10 - 105 % Long-term output stability: ± 3 % Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Current: 15 A Laser hours: 0.1 h Pump runtime: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18 - 30 °C Air pressure: 6 bar Ambient temperature: 0 - 45 °C Dimensions & Weight Dimensions (W x D x H): 3U 19" rack Machine weight: 60 kg EQUIPMENT • Powder System PSH 100 • Extraction and filtration system • Chiller unit • 5x powder bottles (5 L) • 6x substrate plates • 10x filter elements (H13) • 26x wiper lips • Spare sieves • Protective suits • Cleaning wipes for optics (F-theta) • Various small parts & spare components Lodpfx Asy H Hxyokqoah

Condition: used, Year of construction: 2005, Copier In working condition Laedpfexzf Elex Akqsh Year of manufacture: approx. 2005

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Laedpoy Rn A Ijfx Akqjh Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: excellent (used), functionality: fully functional, Very nice AMT PostPro SFX vapor polisher. Comes with parameters for TPU and PA12. Includes all extra accessories like the rack underneath. Laodpoy Dglujfx Akqjh Additionally, this system comes with custom-developed recipes to run third-party consumables, saving approximately 70%!

Condition: excellent (used), We are offering this AFINIA L801-01 color label printer, which is in very good condition, purchased in 2022, and hardly used. Laedpfx Aezaampskqeh Includes a spare printhead. Input voltage: 100 - 240 V Input current: 2.4 - 1.0 A Frequency: 50 / 60 Hz Maximum power: 200 W If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2011, condition: used, Operational unit. Lasdoyh Ha Nopfx Akqjh Recently taken from the production!

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Ledexvxrnopfx Akqsah Wood type: Pine, Spruce Scanner functionality Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Processing (S) of the fiber deviation map from the laser scatter signal. Processing (R) of the roughness map from the laser triangulation signal. Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image.

Condition: good (used), Year of construction: 2022, functionality: fully functional, 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measuring range: Up to approx. 120 mm Volume capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High resolution, no additional color cameras required Interface: USB 3.0 Type B Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision mechanics, reverse engineering, cultural assets, 3D printing Laedpfx Akjxvyiuoqoh Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: Up to 400 kg Max. table size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: Via vertical clamp or quick-release clamp Mobility: 4 swivel castors with total lock Installation aid: Roller strip for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Lasdpexnp Hasfx Akqsh Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz EQUIPMENT Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Ljdpfx Akjxwpvgoqsah Furthermore, a variety of materials is available for the machine.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Laodpfev Iy H Iox Akqsh Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: new, Year of construction: 2026, Technical data Control system: multi-axis real-time interpolator with active trajectory prediction. Communication via LAN, EtherCat, sampling time below 1 ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Laodpsv Ramgsfx Akqjh Z-axis clearance: 500 – 1200 mm Drive system: Servo drives with EtherCat protocol, X and Y axes with hardened, ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5. Linear guidance: Trapezoidal rails Travel speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave with gantry angle correction Print heads: G.12 with output up to 12 kg/h G.20 with output up to 20 kg/h G.50 with output up to 50 kg/h G.200 with output up to 200 kg/h Construction: welded steel, ribbed, stress-relieved, precision machined We have extensive experience with a variety of materials, including: • Basic materials: PE, PP, ABS, PLA, PA, PC, PET, etc. • Advanced materials: PPS, PEEK, PEKK, etc. • Reinforced materials: carbon fiber, glass fiber, natural fibers.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X 1 Sinter II 1 LMI Washing Unit 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer MACHINE DETAILS Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained - Intuitive operation via touch displays Laedpfxjyc Ub To Akqoh - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 556 h, total length: 483 mm, total height: 914 mm, total width: 584 mm, type of input current: DC, overall weight: 48 kg, warranty duration: 16 months, feed length X-axis: 330 mm, feed length Y-axis: 270 mm, feed length Z-axis: 200 mm, For sale: Markforged X7 industrial 3D printer – in excellent/like-new condition We are offering a Markforged X7 industrial composite 3D printer for sale, purchased in 2024, with only 557 operating hours. This means the unit has seen very little use and is in outstanding condition. The machine comes with a valid manufacturer’s warranty. Lajdpoydmnbsfx Akqjh All consumables supplied at the time of purchase (in original drum packaging) are present, along with all original accessories, documentation, and packaging. Key features: Model: Markforged X7 Year of purchase: 2024 Operating hours: 557 hours Condition: used, excellent / like new Warranty: valid Accessories: full, factory Materials: complete set in packaging Original drum packaging The Markforged X7 is an ideal solution for industrial prototyping, functional parts, tooling and fixtures, where high strength, precision, and reliability are essential. The machine can be inspected, tested, and is ready for immediate commissioning upon request.

Condition: new, functionality: fully functional, machine/vehicle number: 1325, Year of construction: 2026, Robust, efficient, and user-friendly 3D printer for producing components from resin, rubber, PLA, ABS, PET-G, and other plastics. Operates on three axes (X, Y, Z), enabling the creation of precise, three-dimensional details. 3D Printer 1325 3D Printer STANDARD EQUIPMENT INCLUDES: - Complete control system - Print head - Dryer and granulate feeder - Software Ledpfoxfq Dbex Akqsah TECHNICAL DATA: - Output from 8 kg/h - Interchangeable nozzles ⌀ 3–12 mm - Air-cooled print head - Compact print head dimensions - Motor power 1.5 kW

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Lsdpfsx I Rfgjx Akqjah Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Connection type: 3W+N+PE Lasdpfx Akeyvhubsqoh Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg If you have any questions or require more information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, The CU 260 FS is a multifunctional woodworking machining center that dramatically increases production capabilities even in workshops with limited space. This powerful and innovative machine is not just a combination of devices, but a complete integrated solution, replacing several machines and offering the full range of essential operations: planing, cutting/sawing, milling, and drilling/mortising. The main advantage of this model is the use of a spiral cutter block with replaceable carbide knives, which reduces noise levels by around 50% and extends the sharpness over 20 times compared to a classic straight-knife cutter block. Technical Specifications Voltage: 400 V Dimensions - width: 1600 mm Dimensions - depth: 2340 mm Dimensions - height: 1150 mm Weight approx.: 456 kg Planer Planing width: 250 mm Cutter block speed: 4,000 rpm Working height: 865 mm Number of knives: 24 pcs. Cutter block diameter: 75 mm Planer fence: 720 x 130 mm Fence tilt range: 90° - 45° Maximum chip thickness: 5 mm Motor power: 2.8 kW Motor power S1 100%: 2.0 kW Planer table length: 1,090 mm Thicknesser Thickness table length: 600 mm Thickness planing width: 250 mm Clearance - minimum material height: 5 mm Clearance - maximum material height: 185 mm Maximum chip thickness: 1.8 mm Feed speed: 8 m/min Extraction port diameter: 100 mm Drilling/mortising unit (CWM 250 series - optional) Drilling table size: 370 x 150 mm Westcott drill chuck: 0 - 16 mm Drilling depth: 90 mm Drilling width adjustment: 160 mm Height adjustment: 85 mm Extraction port diameter: 100 mm Circular saw Table size - width: 900 mm Table size - depth: 345 mm Working height: 865 mm Table extension: 600 x 460 mm Sliding table length - panel/roller: 1,600 mm Sliding table width - panel/roller: 240 mm Sliding table, carriage type: Panel Crosscut length / table travel: 1,600 mm Blade size: 250 x 30 mm Cutting height at 90°: 80 mm Cutting height at 45°: 60 mm Cutting width with guide: 910 mm Main saw blade speed: 4,750 rpm Extraction port diameter: 100 mm Motor power: 3.0 kW Motor power S1 100%: 2.2 kW Spindle moulder Spindle diameter: 30 mm Height adjustment: 110 mm Table opening: 170 mm Clamping length: 90 mm Max. profiling tool diameter: 150 mm Max. tenoning tool diameter: 150 mm Spindle speed min.: 1,400 rpm Spindle speed max.: 8,000 rpm Number of speed steps: 4 (1,400 / 4,000 / 6,000 / 8,000) Extraction port diameter: 100 mm Motor power: 2.1 kW Motor power S1 100%: 1.5 kW Lsdpoytc N Hefx Akqsah Scope of delivery Spiral cutter head with 24 TCT (carbide) knives Spare TCT knives (5 pcs) Planer fence Hold-down clamp Mitre cutting guide Spindle moulder guide Protective guard with extraction nozzle Connecting hose with Y-branch Aluminium fence with stop Circular saw blade 250 x 3.2 x 30 mm / 24 teeth Digital spindle speed indicator Push stick Tools

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: T2C100295, The T2-C bridges the gap between compact, affordable desktop label printers and costly, large-scale commercial label presses to deliver a highly flexible and productive solution for medium to large volume label production. Outfitted with cost-effective 2-liter ink tanks, the T2-C offers an ideal balance of enhanced print accuracy and reduced ink costs, resulting in notable operational savings throughout its lifespan. - Rapid print speed up to 12 inches per second (60 feet per minute) - Superior image clarity with up to 1600 dpi resolution - Adjustable print width from 2” to 8.6” - Compact footprint – occupies less than 4 square feet - The first desktop press offering the throughput and precision of a full-scale digital press - The T2-C stands as the first high-capacity, high-volume tabletop label press able to sustain precision during extended print runs. Delivering consistent, large volumes in 24/7 production, the T2-C redefines possibilities in the label printing sector. This high-output tabletop press is perfectly suited for brand owners, print shops, and small-scale label converters aspiring to diversify their portfolio with high-resolution color inkjet labels. Furthermore, the T2-C operates quietly and, thanks to its compact 4-square-foot design, integrates seamlessly into any printing facility. Additionally, the T2-C produces commercial-grade labels with exceptional print resolution of up to 1600 dpi. The adjustable print width (2” to 8.8”) enables printing of multiple labels or single oversized labels in a single print job. Most importantly, with an impressive print speed of up to 12 inches per second, users can handle extensive print runs efficiently. Ljdpfxsyr Hx Aj Akqsah Key Features of the T2-C: - Straight-feed, short web path for precise printing and minimized material waste - Servo-driven web handling and tensioning system for optimal media control - Dynamic web guide with servo-controlled unwind/rewind shafts ensures precise registration, supporting full-bleed printing on pre-die cut labels and perfectly wound rolls - Advanced ink system and printhead combination extends printhead longevity and lowers ink consumption, reducing overall operating costs Advanced T2-C Ink System: - Yields approximately 500,000 4" x 4" (100 mm x 100 mm) labels at 50% ink coverage - 1.5 to 3 times increased lightfastness - Significant enhancement in water resistance - Improved black (K) ink performance while reducing Cyan, Magenta, and Yellow usage - Approximately 10% lower total cost of ownership versus previous ink formulations The T2-C is an optimal desktop label printing solution, providing both business owners and users with peace of mind through the perfect fusion of ease of use, precision, print quality, and reliability. Printer Specifications: - Print Technology: Memjet Waterfall Technology - Ink Type: Dye ink, 4 individual CMYK tanks or cartridge option - Print Resolution: 1600 x 800 dpi or 1600 x 1600 dpi - Print Speed: 6 ips (150 mm/s) or 12 ips (300 mm/s) - Maximum Print Width: 8.6”

Condition: refurbished (used), For Sale: Refurbished EOS M100 – Ready to Use This fully inspected and refurbished EOS M100 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) Laodpewt Dhrsfx Akqoh • Material Type: Metal • Compatible Materials: On Request • Build Volume: 100 x 100 x 95 mm • Laser Type: Yb-fiber laser; 1 x 200 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!