Used Munters Ml 180 for sale (7,178)

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Hsdjygui Sspfx Ag Ioi Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone. Hodsyguh Iopfx Ag Ioi

Condition: ready for operation (used), Year of construction: 2000, PERTICI ML 139 drainage milling machine, used, in working condition Hsdpfx Aoynwavog Iji

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 Hedpfxerfx Tno Ag Iei VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), mileage: 364,903 km, power: 132 kW (179.47 HP), first registration: 02/2001, fuel type: diesel, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, total length: 9,050 mm, total width: 2,500 mm, total height: 3,600 mm, loading space length: 6,950 mm, loading space width: 2,370 mm, loading space height: 2,490 mm, Year of construction: 2001, Equipment: tail-lift, Number of cylinders: 6 Unladen weight: 7,660 kg Payload: 4,330 kg Hjdpsylpyijfx Ag Iei gross vehicle weight: 11,990 kg Tail lift: Dautel, 2,000 kg Technical condition: good Please contact Vitali Lenda for further information.

Condition: good (used), mileage: 364,903 km, power: 132 kW (179.47 HP), first registration: 04/2001, fuel type: diesel, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, total length: 9,050 mm, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2001, Equipment: tail-lift, Number of cylinders: 6 Unladen weight: 7,660 kg Payload: 4,330 kg Hsdpfoylpwnjx Ag Iei gross vehicle weight: 11,990 kg Tail lift: Dautel, 2,000 kg Technical condition: good Please contact Vitali Lenda for further information.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Hsdpfx Aoyi Ezkeg Iei Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Hjdpfx Agjyglb Ss Iji Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: used, mileage: 43,000 km, power: 132 kW (179.47 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, Year of manufacture: 2023 Front axle: Steering Rear axle: Double wheels Hedpfx Agoylm Nbj Isi Registration number: 538600

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010407, travel distance X-axis: 320 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 320 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 40,000 rpm, TECHNICAL DETAILS Travel distance X-axis: 320 mm Travel distance Y-axis: 320 mm Travel distance Z-axis: 320 mm Number of axes (simultaneous): 5 Max. spindle speed: 40,000 rpm Max. workpiece length: 150 mm Max. workpiece width: 150 mm Max. workpiece height: 150 mm Max. workpiece weight on table: 20 kg A-axis: 360° B-axis swivel range: +/- 115° Number of tools in tool changer: 60 Tool holder: ISO V 30 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Hodpfx Agoyhnyge Iei Control system: HEIDENHAIN iTNC 530 Connection: 50 Hz 3x 400 Volt Spindle motor: 11 kW Total power consumption: 35 kW Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,400 x 2,900 mm Machine weight: approx. 6,000 kg EQUIPMENT Set of tool holders Coolant unit Chip conveyor Lighting Coolant/mist extraction Switch cabinet air conditioning Status indicator lamp

Condition: used, mileage: 7,514 km, power: 96 kW (130.52 HP), fuel type: gasoline, gearing type: automatic, overall weight: 2,118 kg, first registration: 03/2025, fuel consumption (urban): 7.1 l/100km, fuel consumption (extra-urban): 7.1 l/100km, fuel consumption (combined): 7.1 l/100km, CO₂ emissions: 162 g/km, emission class: euro6, color: blue, suspension: steel, number of seats: 5, fuel: regular/benzine 91, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, LG7 LED high-performance headlights, Z6L Progressive, E07 Hill Start Assist, E2Z MBUX multimedia system incl. navigation & DAB, EX8 MBUX Navigation Plus, P2W Advantage Package, FR8 reversing camera, E1K Navigation Package, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat attachment, EY6 breakdown management, B25 electric parking brake, EI0 wireless charging system for mobile devices, FK3 chrome radiator grille, T68 child safety locks for passenger compartment doors and windows, Z1M M1 homologation, IA0 drive configuration 4x2, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, T78 side door rail cover in body color, Y10 first aid kit, MJ8 ECO start/stop function, 804 AEJ X3/1, VL2 velour floor mats, SF6 driver's seat height-adjustable with lumbar support, RD9 tires without specified brand, H00 warm air duct to passenger compartment, C6L multifunction steering wheel, X0O weight variant 2,118 kg, H22 heated rear window, JW8 ATTENTION ASSIST, EM7 2 USB ports in rear center console, Y44 warning triangle, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 VIN externally visible, SZ6 folding table on driver and passenger seat backrests, JH3 communication module (LTE) for digital services, X31 registration certificate part II prepared, FQ3 closed glove compartment on passenger side, I5T plastic underbody protection, RY2 tire pressure monitoring on front axle, We are happy to provide you with an individual financing or leasing offer and accept your used vehicle as a trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, secondary paintwork may have been carried out as part of reconditioning. No liability for printing and typing errors. Subject to change and prior sale. Click features may include digital extras that can be subscribed to in full or for a limited period at a charge via MercedesMe. ... More on our homepage. Hodpfx Asxq Ntxog Ioi

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used automatic wheel rim cleaning machine - BBS Hsdpfew Rrwzsx Ag Iji Manufacturer: Macchina Utensili Year of manufacture: 2000

Condition: used, mileage: 120,000 km, power: 152 kW (206.66 HP), first registration: 06/2021, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,185 mm, color: white, driver cabin: other, gearing type: mechanical, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, low noise, traction control, Color: White, Permissible total weight: 7490kg, Fabric seats, Pneumatic leaf suspension, Low noise: CEE 92/97, Electronic stability program ESP, Anti-slip system ASR, Adaptive cruise control, Comfort driver's seat, Pneumatic driver's seat, Double passenger bench (2 persons), Multifunction display, Lane keeping alert, Electric windows, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote control, Twin rear tires, LED daytime running lights, Speed limiter, Emergency brake assist, Splash guards, FMS data interface, Coat rail, FMS data interface (repeated), Coat rail (repeated). Hjdeyncn Sjpfx Ag Iei

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 295 h, load capacity: 250 kg, empty load weight: 2,750 kg, construction height: 1,995 mm, fuel type: gasoline, total length: 5,041 mm, drive type: Benzin, arm reach: 9,800 mm, construction width: 1,470 mm, working height: 18,200 mm, Crawler work platform Technical condition: very good Battery condition: very good Hedpswx Tx Defx Ag Iji

Condition: used, Year of construction: 2024, total length: 7,790 mm, · Arbeitshöhe 18.19 m · Plattformhöhe 16.19 m · Maximale seitliche Reichweite 10.51 m · Ãoeberhang / Knickpunkt Gelenk 7.55 m · Korbarm-Drehwinkel (Boden) +-59.50 ° · Tragfähigkeit des Arbeitskorbs 230 kg · Drehung des Oberwagens 350 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Anzahl Personen (innen / außen) 2 / 2 · Gegengewicht Versatz (Oberwagen bei 90°) 0.22 m · Innerer Wenderadius 1.38 m · äußerer Wenderadius 3.75 m · Fahrgeschwindigkeit - Transportmodus 5 km/h · Fahrgeschwindigkeit - Arbeitsmodus 1 km/h · Steigfähigkeit 45 % · Zulässige Neigung im Arbeitsmodus 5 ° · Bereifung Schaumgefüllt · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Gebremste Räder / Räder 0 / 2 · Hersteller / Motor Modell: Kubota - D1105-E4B · Motornorm: Vorläufige Stufe 4, Stage IIIA, Stage V · Nennleistung Verbrennungsmotor / Leistung (kW): 24.80 p / 18.50 kW · Bodendruck 10 dan/cm2 Hedpfx Asx Avu Tsg Iei · Hydraulikdruck 340 bar · Fassungsvermögen des Hydrauliktanks 54 l · Fassungsvermögen des Kraftstofftanks 52 l · Schwingungsbelastung Hand/Arm < 0 m/s² · Täglicher Verbrauch 4.26 l · Diese Maschine entspricht: Europäische Richtlinien: 2006/42/EG - Maschinen(Neufassung EN 280:2013) - 2004/108/EG (EMV) -2006/95/EG (Niederspannung)

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 285 A, welding current at 100% duty cycle: 270 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Kemppi MasterTig MLS 4000 with 3 Months Warranty Steel – Stainless Steel Weldable Refurbished – Serviced – Tested 5-400 AMP 30% ED: 400A 60% ED: 285A 100% ED: 270A 400 Volt Gas-cooled 2/4 Step Pre gas Post gas Up slope Down slope Stick option Including: 8 Meter Welding torch Earth work lead with clamp Gas hose Trolley Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Hjdpfxjyk Trye Ag Ioi We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Technical details: Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m Hsdpfx Agjwiu Smj Isi BRUSH MACHINE *

Condition: used, Year of construction: 2010, operating hours: 3,000 h, Kramer 180 Year of manufacture: 2010 Operating hours: approx. 3,000 h Ready for immediate use Hsdpfxsyluvpe Ag Isi incl. folding bucket incl. pallet fork Service: new UVV inspection: new

Condition: used, mileage: 10 km, power: 132 kW (179.47 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 800 kg, overall weight: 3,500 kg, tire size: 225/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, next inspection (TÜV): 01/2028, CO₂ emissions: 152 g/km, fuel consumption (urban): 6.7 l/100km, fuel consumption (extra-urban): 5.5 l/100km, fuel consumption (combined): 5.9 l/100km, color: grey, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,720 mm, loading space volume: 21 m³, loading space length: 4,230 mm, loading space width: 2,210 mm, loading space height: 2,300 mm, Year of construction: 2026, front tire size: 225/75R16C, rear tire size: 225/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, second-hand vehicle warranty, soot filter, spoiler, traction control, trailer coupling, Fiat Ducato 2.2 MJ 132KW/180HP POWER New vehicle in stock, available immediately Latest model of Series 10 (9.2)! Flatbed with tarpaulin superstructure, sliding curtain sides left and right Roof and side spoilers 3D Cargo space length: 4,230 mm, width: 2,210 mm, height: 2,300 mm 8x lashing points - underride protection Tail lift Bär 750 kg with roll-off protection Towbar MAXI version with 16-inch tires and large brake system Gross vehicle weight: 3,500 kg Paint finish: Lanzarote Grey 385 5CK 38C PACKAGE 'VISIBILITY PLUS' 9WE Full LED headlights LPZ Fog lights with static cornering light 051 Rain and light sensor AW9 PACKAGE 'TECHNO' 2PZ Uconnect 10'' navigation system with Android Auto Apple CarPlay 316 Reversing camera RS3 USB interface on dashboard 140 Automatic climate control 835 Storage compartment in roof 132 Center armrest and lumbar support for driver's seat NHR Cruise control + speed limiter 041 Exterior mirrors electrically adjustable and heated 4B0 Cup/card holder 077 Double-leaf rear spring 293 Double passenger bench seat with table 786-980 Spare wheel in road tires with on-board tools 738 90-liter fuel tank 692 Daytime running lights 806 Heated fuel filter 5EM Dark-tinted headlights 500 Driver airbag 502 Passenger airbag 5F4 Safety package Electronic stability control: - Crosswind assist - Trailer stability control - Post-collision braking - Rollover prevention - Traction control (ASR) - Hydraulic brake assist (HBA) - Hill start assist - Adaptive load control (LAC) Safety kit: - Emergency brake assist (pedestrian and cyclist detection) - Lane departure warning - Traffic sign recognition - Drowsiness warning - Intelligent speed assist 5EM Dark-tinted headlights 4DH 980 Full-size spare wheel with on-board tools 5DE Start & Stop automatic 0AA Ecopack with Stop&Start system incl. activation switch, intelligent alternator (200 A), electric fuel pump We are happy to offer you a financing or leasing plan. Optionally, we can supply: set of complete winter wheels Hedpfoyl R Axox Ag Iji

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 800 kg, overall weight: 3,500 kg, tire size: 225/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, CO₂ emissions: 152 g/km, fuel consumption (urban): 6.7 l/100km, fuel consumption (extra-urban): 5.5 l/100km, fuel consumption (combined): 5.9 l/100km, color: grey, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,720 mm, loading space volume: 21 m³, loading space length: 4,230 mm, loading space width: 2,210 mm, loading space height: 2,300 mm, Year of construction: 2026, front tire size: 225/75R16C, rear tire size: 225/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, second-hand vehicle warranty, soot filter, spoiler, traction control, trailer coupling, Fiat Ducato 2.2 MJ 132KW/180HP POWER New vehicle in stock, immediately available. Latest Series 10 (9.2) model! Platform truck with curtain-side body and sliding curtains left and right, roof and side spoilers. 3D cargo space: Length 4,230 mm, width 2,210 mm, height 2,300 mm. 8 lashing points - underride protection. Bär tail lift 750 kg with anti-roll protection. Towbar. MAXI version with 16-inch wheels and large brake system. Gross vehicle weight: 3,500 kg. Paint finish: Lanzarote Grey 385 5CK 38C. PACKAGE “VISIBILITY PLUS”: 9WE full LED headlights, LPZ fog lamps with static cornering light, 051 rain and light sensor. AW9 PACKAGE “TECHNO”: 2PZ Uconnect 10'' navigation system with Android Auto and Apple CarPlay, 316 reversing camera, RS3 USB port on dashboard. 140 automatic climate control, 835 overhead storage compartment, 132 center armrest and lumbar support for driver’s seat, NHR cruise control + speed limiter, 041 exterior mirrors electrically adjustable and heated, 4B0 cup/card holder, 077 dual-leaf rear springs, 293 dual passenger seat with folding table, 786-980 spare wheel with standard tire and on-board tools, 738 90-liter fuel tank, 692 daytime running lights, 806 heated fuel filter, 5EM dark-tinted headlamps, 500 driver airbag, 502 passenger airbag, 5F4 Safety Package, electronic stability control: - crosswind assist - trailer stability control - post-collision braking - rollover mitigation - traction control (ASR) - hydraulic brake assist (HBA) - hill start assist - adaptive load control (LAC). Safety kit: - emergency brake assist (pedestrian and cyclist detection) - lane departure warning - traffic sign recognition - drowsiness detection - intelligent speed assist. 5EM dark-tinted headlamps, 4DH 980 full-size spare wheel with on-board tools, 5DE start/stop automatic, 0AA Eco pack with stop & start system incl. activation switch, smart alternator (200 A), electric fuel pump. We will gladly provide you with a financing or leasing offer. Optionally available: set of complete winter wheels. Hjdpfxsyl R Arj Ag Ioi

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery dealership. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Advantage for Used Machinery Starting from 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as with new equipment. Keyword: Growth Booster (§ 7 Sec. 2 EStG-E). Hsdpsyf Uy Uefx Ag Ioi Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower, 2-Color/2-Component Machine Control System: MC6 Year of Manufacture: 2014 Machine No.: 61020507 Operating Hours: 47,137 h 1st Injection Unit: 750 horizontal Injection unit/screw diameter: 50 mm Shot volume: 393 ccm Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit: 180 vertical Injection unit/screw diameter: 30 mm Shot volume: 85 ccm Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max platen spacing: 900 mm Min. installation height of mould: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Weight: 9,000 kg Extras Nozzle side: Needle shut-off A+C; 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Cooling water BGS with 6 circuits each on nozzle and ejector sides BluePower Technology: up to 40% energy savings The machine has been very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: free loaded onto buyer's truck, or free delivered to site against reimbursement of freight costs. Further information about the machines we offer and our company: - All machines we sell are purchased from ongoing production for our own stock in Hannover. - Every machine is inspected and tested before dismantling. - We do NOT deal in insolvency assets, nor do we act as brokers dealing with third-party goods. - All machines come from successful enterprises where regular maintenance and servicing are the standard. - All machines offered can be inspected at our warehouse.

Condition: excellent (used), Weiss Model: WT11-1300/70/15/S Hodox Eknpjpfx Ag Ioi Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 Liters –70°C to +180°C – 44 kW – Industrial System Water-cooled For sale is a professional Weiss Umwelttechnik temperature chamber. This unit is designed for demanding environmental simulations in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research. The test chamber provides extremely rapid temperature cycling and a large test volume. Technical Data: Model: WT11-1300/70/15/S Test chamber volume: 1300 liters Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 10 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95% r.h., +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical Data: Voltage: 3/N/PE AC 400 V ±10% Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm (1,385 mm housing + 740 mm door area / radius opened) Overall height: approx. 2,020 mm Internal test chamber dimensions: Internal width: approx. 1,000 mm Internal depth: approx. 1,060 mm Internal height: approx. 1,230 mm Equipment: - Stainless steel test chamber 1.4301 - Viewing window in the door - Touch panel control - Access ports: R1: 125 mm L1: 50 mm - Connection for automatic water refill - Cooling water supply and return connections - Overflow/condensate connection - Safety monitoring & alarm system Ideal for: - Automotive / E-Mobility - Aerospace - Research & Development - Electronics testing - Materials laboratories / Quality assurance Volume: 1300 liters Weight: approx. 1,900 kg Important Note for Your Safety as a Buyer! The following procedures are always carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 18,000 mm, mast type: telescopic, Year of construction: 2022, operating hours: 636 h, Year of manufacture: 2022 Drive: Wheel Empty weight: 12.370 kg Dimensions (LxBxH): 626 x 235 x 259 cm Engine type: JCB 430 TA5-55 Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Drivetrain Hsdpfx Agoxn Tw No Ioi Internship / Tier: Stage V / Tier IV final General Country of production: United Kingdom Condition CE type: CE

Condition: used, AJAX AJEV 180 x 750 CNC Turning Centre with Duplamatic style Turret, Tailstock, Fanuc Oi Mate - TD control. New 2015. Weight 1200 Kgs. Hjdpfjyh Dn Dox Ag Iei

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono Hedpoyluuxofx Ag Iei (see technical details on photos) Year of construction: 2021 - Rarely used