Used Newton 20 for sale (28,689)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,633 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 16 x 6 - 8, overall weight: 3,710 kg, total height: 2,180 mm, total length: 2,140 mm, total width: 1,150 mm, fuel: electricity, Equipment: cabin, STILL RX 20-18 PH – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Crjdpfx Asz Aqb Uecpeh Lifting height: 4.700 mm Closed height: 2.180 mm Free lift: 1.450 mm Mast: Triplex (3F470) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2016 Charger: ohne/without Tyres: Superelastik SE 200/50 - 10 (80%) / 16 x 6 - 8 (80%) Service weight: 3.710 kg Length: 2.140 mm Width: 1.150 mm Year of manufacture: 2016 Operating hours: 14.633 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control Internal no.: 1309262 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 600 mm, total height: 1,660 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) Csdpfx Acov Sybyspsrh - weight: approx. 80 Kg

Condition: used, mileage: 61,152 km, power: 382 kW (519.37 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Exhaust outlet on the floor, without reversing warning system, LED lighting, mechanically operated lift roof, 2 air horns on the cab roof, 2 rotating beacons, pre-wiring for rear-view camera, ASR (Anti-Slip Regulation), emergency braking assistant, lane departure warning system, without distance warning system, navigation system 7'' + Europe and Russia map, MAN sound system, Rockinger Type 500G, ARK HYVA 20-60S, lifting height 1570 mm, lifting capacity 200 kN, container sizes 4550 - 7050 mm, auxiliary drive connected to the engine, not switchable, fixed PTO. Crodpfozciw Ajx Acpeh

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. It can be inspected up to week 42; after that, we will dismantle it. The impeller was replaced in October 2025 – a parts invoice is available. Cedpfx Acoz Erfdjpsrh

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 12,000 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, empty load weight: 5,200 kg, DGUV certified until: 02/2027, We are offering this used Husmann SPB 20 FKL press container, manufactured in 1999, for sale. Type: SPB 20 FKL Machine No.: 18590 Volume: 20.0 m3 Power: 5.5 kW Unladen weight: 5200 kg Permissible total weight: 12000 kg Voltage: 400 V Year of manufacture: 1999 Crodpfxozg Ha Ie Acpoh Last maintenance (UVV & DGUV): 02/2026 Two-part lid for ramp access Steel scraper Fully functional If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA Codpfezx Sn Ujx Acpsrh - max width of the workpiece 200mm - max height of the workpiece 140mm - number of spindles 4 1) horizontal lower 200mm, 5.5kW 2) vertical right 140mm, 4kW 3) vertical left 140mm, 4kW 4) horizontal upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm – top: - 6 infeed rollers, toothed, including 2 double rollers - outfeed roller, toothed, double, rubber – bottom: - side pressure roller - infeed roller, toothed, helical, in the lower table - side pressure roller - outfeed roller, smooth, metal - all rollers pneumatically pressed - length of the infeed table 1600mm - table adjustable up/down - central lubrication - electric setting of the planing thickness - lifting motor 1.1kW - stepless feed rate adjustment - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x140mm - dimensions L/W/H 3200x1700x1750mm - weight 3000kg ADVANTAGES – for 4 heads – ideal for both wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12070 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, Year of construction: 2004, From our immediately available stock of used vehicles, we offer you: Firefighting vehicle HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 03/2004 • Mileage: approx. 144,500 km • Unladen weight: 9,450 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Allison automatic transmission • Twin-tire rear axle Cabin: • Standard crew cabin (1:8) in RAL 3000 (fire engine red) • Mounting points for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Schlingmann • HLF20 superstructure according to DIN standard • Three generously sized side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments Crodpfx Aozv Eqkocpeh • Mounting points for standard equipment • Mounting points for 2 additional compressed air breathing apparatus • Deployment system for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Firefighting centrifugal pump Schlingmann FPN 2000-10 • Output: 2,000 l/min at 10 bar • Water tank: 1,800 l • Foam tank: 150 l Firefighting equipment: • Fixed quick-attack hose, 50 m long, located on top • Monitor on the vehicle roof Safety and lighting • Ambient lighting on the superstructure • Pneumatic lighting mast • Rear warning device We will gladly provide you with a detailed offer and show you the vehicle in Berlin. All information is provided to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 11,415 h, load capacity: 1,600 kg, lifting height: 4,610 mm, free lift: 1,440 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, battery capacity: 550 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,237 kg, total height: 2,060 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 / 6211 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.610 mm Closed height: 2.060 mm Free lift: 1.440 mm Mast: Triplex (3F461) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 550 Ah v. 2016 Charger: 48 v 140 A not tested Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (80%) Service weight: 3.237 kg Year of manufacture: 2016 Operating hours: 11.415 h Condition: working condition Credpfxsz Apqho Acpsh EQUIPMENT 3rd valve, Overhead guard cover, Front windscreen, Load backrest, Pulse control ATTACHMENTS Load backrest, Sideshift Internal no.: 1308673 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,931 h, load capacity: 1,400 kg, lifting height: 3,340 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 2,931 kg, total height: 2,160 mm, total length: 1,950 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-14 / 6209 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 3.340 mm Closed height: 2.160 mm Free lift: 1.600 mm Mast: Duplex (2F334) Fork length: 1.600 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah v. 2017 Charger: ohne/without Tyres: Superelastik SE 18 x 7 - 8 (40%) / 15 x 4,5 - 8 (20%) Cedpfx Acez App Rspsrh Service weight: 2.931 kg Length: 1.950 mm Width: 1.100 mm Year of manufacture: 2017 Operating hours: 7.931 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308867 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,037 h, load capacity: 2,000 kg, lifting height: 3,770 mm, fuel type: diesel, mast type: telescopic, construction height: 2,350 mm, motor manufacturer: Yanmar, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 6.50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,300 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 1,070 mm, fuel: diesel, motor model: 4TNE 92 NMHA, Equipment: sideshift, YALE GDP 20 SVX V2425 – Diesel forklifts TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 3.770 mm Closed height: 2.350 mm Mast: Standard (2W377) Fork length: 1.200 mm Fork carriage: 2A Drive: 4-Zyl.-Diesel Engine: Yanmar 4TNE 92 NMHA Tyres: Superelastik SE 6.50 - 10 (40%) / 18 x 7 - 8 (30%) Service weight: 3.300 kg Length: 2.300 mm Width: 1.070 mm Year of manufacture: 2013 Operating hours: 9.037 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Crsdpsz Aqprjfx Acpeh Internal no.: 1102803 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,254 h, load capacity: 1,400 kg, lifting height: 3,380 mm, free lift: 1,580 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,100 kg, total height: 2,160 mm, total length: 2,050 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-14 / 6209 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 3.380 mm Closed height: 2.160 mm Free lift: 1.580 mm Mast: Duplex (2F338) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro Battery: 48 V/625 Ah (2017) Charger: ohne/without Tyres: Superelastik 18x7-8 (80 %) / 15x4,5-8 (60 %) Service weight: 3.100 kg Length: 2.050 mm Width: 1.100 mm Codpsz App Defx Acperh Year of manufacture: 2017 Operating hours: 7.254 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308869 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 8,681 h, load capacity: 2,000 kg, lifting height: 4,800 mm, free lift: 1,530 mm, fuel type: gas, mast type: triplex, construction height: 2,140 mm, motor manufacturer: Mazda, fork length: 1,400 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 6.50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,710 kg, total height: 2,140 mm, total length: 2,350 mm, total width: 1,100 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, YALE GLP 20 SVX E2175 – LPG forklifts TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 4.800 mm Crsdpez Ap I Tsfx Acpoh Closed height: 2.140 mm Free lift: 1.530 mm Mast: Triplex (3F480) Fork length: 1.400 mm Fork carriage: FEM 2A Drive: 4-Zyl. Treibgas Engine: Mazda Tyres: Superelastik SE 6.50 - 10 (20%) / 18 x 7 - 8 (80%) Service weight: 3.710 kg Length: 2.350 mm Width: 1.100 mm Year of manufacture: 2008 Operating hours: 8.681 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift Internal no.: 1202072 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007, Empty weight: 5.500 kg Axle 1: left 4 mm right 4 mm Axle 2: left 6 mm right 6 mm Axle 3: left 4 mm right 4 mm Cedsza T Uyepfx Acporh We have the possibility to stack trailers!

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 07/1984, total length: 7,100 mm, total width: 2,460 mm, suspension: steel, tire size: 295/80 R22.5, wheelbase: 5,600 mm, color: other, Year of construction: 1982, = Additional options and accessories = - 20 Ft Twist Lock - Drum brakes = More information = Axle configuration Tyre size: 295/80 R22.5 Suspension: leaf suspension Rear axle 1: Double wheels; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Brakes: drum brakes Credpfozfvtbex Acpeh Weights Empty weight: 3.540 kg Carrying capacity: 24.460 kg GVW: 28.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: OF-27-42 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Credpfx Acoz Hbzqepjh Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW 2. PRESKONTAINER LM20L, 2011, 5.5 kW Price on request!

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Credpfxoxg H Hho Acpsh

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,618 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 500 Ah, remaining battery capacity: 86 %, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: * Operating hours: 2,618 * Lifting capacity: 2,000 kg * Lifting height: 4,000 mm * Overall height: 2,550 mm * Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a partial cabin, very good tires (rear tires new), duplex mast with full free lift, battery with 86% capacity, side shifter, 4th valve, multi-lever control, two-pedal control, lighting, fork length 1,200 mm, charger. Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Please call to schedule. Crjdpfxozrr H Dj Acpoh Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs on request). You can find more information and offers on our website!

Condition: used, Year of construction: 2001, total length: 3,600 mm, total width: 2,000 mm, total height: 2,800 mm, Colour: Red Weight: 5.500 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HFE50-20LV010254 - Drive system: CNC - Control system brand: Amada - Control system type: Operateur 2 CNC - Power [kW]: 6.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 50 Cedezwvrzepfx Acperh - Max. working width [mm]: 2090 - Column gap [mm]: 1665 - Throat depth [mm]: 400 - Max. stroke [mm]: 350 - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3600mm x 2000mm x 2800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour Crsdez Euubopfx Acpoh • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 31600 € 603.56 € Credpfxoyb Szbs Acpsh 2050 mm 6 mm 6 mm 4 mm 4 mm 3 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 4250 mm 960 mm 1100 mm 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 46300 € 884.33 € 2050 mm 11 mm 11 mm 9 mm 9 mm 7 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Cedpoyb Szusfx Acpjrh Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 73200 € 1383.48 € 2050 mm 20 mm Crjdpfxoynmylo Acpoh 20 mm 16 mm 16 mm 12 mm 280 mm 280 mm 220 mm 1,5 / 5 m/min 16.5 kW 4350 mm 1700 mm 1850 mm 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: used, Year of construction: 2012, machine/vehicle number: A092895, Marel OptiWeigher + 20-Gate Fish Grader with 6 Printers Grader type: dis-ma45-b600-dual Complete used Marel weighing, grading and packing system for fish processing. The system includes a Marel OptiWeigher dynamic weighing module and a dual-sided Marel grader with 20 grading outlets. Configuration: Credoz Hc Aispfx Acpsh - Marel OptiWeigher - 20 grading gates - 10 gates on the left - 10 gates on the right - gate spacing: 675 mm - 6 label printers - 3 printers on each side - packing shelves - roller conveyors - packing buffers - stainless-steel food-processing construction - Intralox Series 1650 polypropylene belt - approx. grader length: 9,050 mm - electrical supply: 3 × 400 V + N - grader motor: 0.75 kW The product is dynamically weighed by the OptiWeigher and can then be automatically distributed to the selected grading outlet according to the programmed weight class. The machine was used for fish processing and is suitable for applications such as: - fish grading, - salmon processing, - batching, - weight classification, - direct packing at grading stations. It may also be adapted for poultry or other food products, depending on product size and process requirements. The six printer positions allow direct labeling at packing stations. Possible packing formats include: - cartons, - EPS / polystyrene boxes, - plastic crates, - tubs. The system may be integrated into a Marel Innova environment, subject to verification of the installed control and software configuration. Technical documentation available. Inspection possible by appointment. Price: on request.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, Manufacturer: MAZAK Model: VTC-820/20 HD Year: 2017 Table size: 2500 x 820 mm X-axis travel: 2000 mm Y-axis travel: 820 mm Crjdpfx Acoz Dt E Nopjh Z-axis travel: 860 mm Control unit: Smooth G Spindle connection: Din-69871 Tool magazine capacity (automatic tool changer): 36 Chip conveyor: Yes, belt type High-pressure system through the spindle: 20 bar Spindle power (milling): 30 Kw Spindle speed (milling): 10,000 rpm Renishaw system: Yes, complete Automatic tool presetting: Yes, complete

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Max Panel Length: 40 mm Max feed speed: 60 m/min Operating Units: 3 nr Cjdpfjwucknsx Acporh