Used Notching Tool for sale (37,312)

Condition: excellent (used), Year of construction: 2015, Tool-Temp Type: TT-181 Year of manufacture: 2015 Connected load: 9.85 kW Lhsdpfeyzg E Njx Akqjn Weight: 55 kg

Condition: excellent (used), Year of construction: 2014, Tool-Temp TT-180C Year of manufacture: 2014 Connected load: 9.85 kW Weight: 55 kg Lhedoyzf Uvopfx Akqsn

Condition: used, Avia FND-32N1 Tool Milling Machine. Lhjdpfx Aev R Ipcokqen Please check out our other listings as well.

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Ljdpfxey St Ure Akqshn

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Lodpfx Aksu Ictboqjhn Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min Lsde Ad Si Tepfx Akqjhn :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: used, Year of construction: 1971, x-travel:450 mm Lhjdpfo Ad Skdsx Akqjn y-travel:320 mm z-travel:450 mm table-size:950 x 300 mm spindle turning speed range:39-2320 U/min spindle taper:SK 40 power capacity - milling spindle:2,5 kW total power requirement:2,8 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,3 x 1,8 m with vertical head, spindle quill, swivelling horizontal spindle, variable adjustable feed for all 3 axes, coolant device, machine light, chip pan, emergency cut-off

Condition: like new (used), Year of construction: 2012, operating hours: 10,422 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, overall weight: 4,250 kg, grinding spindle speed: 1,000 rpm, grinding spindle motor power: 4 W, input current: 20 A, input frequency: 50 Hz, input voltage: 380 V, space requirement width: 1,800 mm, space requirement length: 5,000 mm, space requirement height: 2,200 mm, Equipment: rotational speed infinitely variable, ANCA FastGrind 5-axis tool grinding machine with integrated loader Year of manufacture 2012, 10 kW (spindle 3.7 kW), RN34.1 control system (replacement/update in 2019) Ljdpfx Aj Adu Tbekqjhn including VOMAT coolant system with backflushing and air conditioning including various collets and grinding wheels including 5 loader pallets (3, 6, 8, 10, 12 mm) This machine has performed flawlessly throughout its service life and has consistently worked reliably and precisely until the very end. The software is a pleasure to use! It is being sold only due to the closure of the business.

Condition: excellent (used), For sale: Form thermostat – Tool Temp TT-188 Max. heating temperature – 90°C Medium – water Power: 9850 Watts Lodpfsz Sk Efox Akqohn The unit features: - vacuum pump - vacuum reservoir - medium extraction function from the mold - the unit can be integrated with the machine, making it unmanned/unattended.

Condition: excellent (used), Year of construction: 2010, Tool-Temp Type: TT-180 Ljdpfx Akoyzg Svjqohn Year of manufacture: 2010

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Lhodpfx Akozz S Rneqjn

Condition: used, diameter div. number 56x tool adaptor BT 40 Lodpfowtrzysx Akqjhn

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Lodpfxjy Suave Akqjhn

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders 8 x drilling tool holders Lsdpfowg Rv Njx Akqohn Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2005, Tool-Temp TT-162 H, year of manufacture approx. 2005, oil Lhodpfxoyzga Te Akqen

Condition: used, Year of construction: 1988, operating hours: 66,120 h, functionality: fully functional, machine/vehicle number: 152.51.80.8xx, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, type of input current: three-phase, total height: 2,500 mm, total length: 2,100 mm, total width: 2,400 mm, overall weight: 3,100 kg, input voltage: 380 V, Equipment: documentation/manual, CNC milling machine Mikron WF 61 C – Heidenhain + accessories We are selling a Mikron WF 61 C with Heidenhain control from our machine inventory. The machine is offered including accessories, vices, and milling chucks. Machine and equipment: • Manufacturer: Mikron • Model: WF 61 C • Control: Heidenhain • Clamping table with T-slots • Separate control panel • Protective guard in the work area Lhjdpfxs Aazphe Akqon Included in the scope of delivery: • Mikron WF 61 C • Vices • Milling chucks The machine shows signs of wear and tear due to age and use, as well as paint chipping. The current original photos show the visual condition. An inspection is possible by appointment. The exact scope of accessories can be discussed and agreed upon. Terms of sale: Sale exclusively to entrepreneurs within the meaning of § 14 BGB (German Civil Code). The used machine is sold with exclusion of any warranty for defects in materials and workmanship. No guarantee regarding the condition is provided. The exclusion does not apply to the extent that a defect was fraudulently concealed or a guarantee regarding the condition was given. Commercial sale with invoice. Collection and transport by arrangement.

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. Lhedpoz Aa Idjfx Akqon The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Milling cutters and tool holders can also be included upon request. Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Year of construction: 2003, condition: used, Oil temperature control unit Year: 2003 – like new Medium: Oil Model: TT-288 / MP794 Lhjdpozcat Ujfx Akqen Up to 250°C Cooling capacity approx. 60 kW at 250°C

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Ljdpfxj Aa Il Ao Akqjhn Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: excellent (used), Year of construction: 2016, overall weight: 420 kg, tool diameter: 420 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, ZOLLER venturion 450 – CNC setting and measuring device, year of manufacture 2016, very little use The machine was purchased by the previous owner as an additional device and was practically not used; it was sold because it is no longer needed. Accordingly, the usage is very low – the machine is in new condition and fully functional. It is located in Velten and can be inspected while powered on by arrangement. THE ADVANTAGES - Very little use, new condition, last ZOLLER maintenance 12/2022 - CNC drives in X, Z and C: Cutting edge is automatically approached, focused and measured – independent of the operator, even with multi-cutting tools - Non-contact optics with transmitted and incident light: Contour, breakouts, wear and corner radius are detected - pilot 3.0: automatic cutting edge detection, zero point monitoring, tool and adapter management, test protocol, data transfer to the machines - Immediately ready for use with control unit, label printer and adapters SK 40 / VDI 40 / VDI 50 Lsdpfx As Advkzjkqshn TECHNICAL DATA - Measuring range Z 450 mm · X radius 210 mm (tool Ø up to 420 mm) · Internal jaw depth Ø 100 mm - max. tool weight 50 kg - 100–240 V~, 50/60 Hz, 1 kVA · Compressed air 6–8 bar - W × D × H 2500 × 810 × 1710 mm · Weight 350 kg + control unit approx. 80 kg EQUIPMENT ACCORDING TO FACTORY EQUIPMENT LIST ZOLLER (05/13/2016) 1. Z05MK446.11 USB camera with optics and integrated LED incident light 2. Z05E6187 Transmitted light "pilot" "DLR" / V-series 3. Z05E6127.11 USB camera with optics and integrated LED incident light 4. V429530-01 HGV-ACE mounting assembly vent. 450+600 5. V429515 Accessory kit for drive and ROD "venturion 450/600" 6. N001831 Drive unit linear CNC/"usbmotion" 7. N001831 Drive unit linear CNC/"usbmotion" 8. N001918 Drive unit rotary CNC/"usbmotion" 9. Z05E6024 Foil keyboard "smart-size" for electronics-Z80 10. Z05E7026-01 USB motion controller 11. Z05E6038-00 Valve module Z100-V 12. Z05E6037-20 24V voltage distribution with fuses 13. Z05E6035-10 Lighting module Z100-L 14. Z9700910-36 ZOLLER measuring device control 11th generation panel PC 24" 2980U 15. Z9734883-01 Printer for TH labels, print width 25–108 mm 16. Z9734883-02 Power supply 24V DC 2.5A 60W, 100–240V AC 50/60Hz ADDITIONALLY INCLUDED - Adapters SK 40, VDI 40 and VDI 50 - Control unit on stand with monitor, keyboard and mouse - Software ZOLLER pilot 3.0 - Cables and small parts as shown in the photos Tools and tool holders are not included in the scope of delivery. SERVICE By arrangement: Installation and commissioning · Training · Demonstration under power in Velten · Transport. TRANSACTION Location 16727 Velten near Berlin · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt. Data sheet as PDF attached. Technical data according to nameplate, operating manual and factory equipment list (information, not a guarantee of quality according to §§ 434, 443 BGB). Errors and prior sale excepted.

Condition: excellent (used), Item description: Lhedpfxjzz Itfs Akqjn Assortment of SK40 tools, approximately 250 pieces, from Wohlhaupter, Komet, Granat, etc. ----- Item condition: The goods come from a company liquidation. Condition: used Internal number: 26.528, 26.530, 26.531 & 26.532

Condition: used, functionality: fully functional, Several MP 888 controllers from Tool-Temp are available for sale or for exchange. Lhedpfxov E Uire Akqsn

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted. Lodjz S Afpspfx Akqehn

Condition: like new (used), Year of construction: 2017, operating hours: 180 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10 rpm, spindle speed (min.): 10,000 rpm, table length: 800 mm, type of input current: three-phase, total height: 2,200 mm, total length: 2,164 mm, total width: 1,860 mm, overall weight: 2,800 kg, table load: 300 kg, grinding spindle motor power: 15,000 W, workpiece weight (max.): 300 kg, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, OPTIMUM OPTImill F 105 CNC machining center (vertical) – year of manufacture 2017 For sale is a vertical, high-performance CNC machining center from the reputable manufacturer OPTIMUM, model OPTImill F 105 CNC. The machine was only exhibited at trade shows and is in excellent condition and ready for immediate use. The unit has only approximately 180 operating hours! General information: • Condition: Like-new demonstration machine (year of manufacture 2017) • Control: Intuitive and reliable Siemens Sinumerik 808D advanced • Premium accessories: Including high-quality RENISHAW Primo measuring probe for maximum precision • Spindle performance: Dynamic spindle up to 10,000 rpm with BT 40 tool holder _____ Technical data: Travel distances: • X-axis: 550 mm • Y-axis: 305 mm • Z-axis: 460 mm • Spindle/table distance: 100 – 600 mm Main spindle: • Speed range: 10 – 10,000 min⁻¹ • Drive power: 11 kW (short-term) / 7.5 kW (continuous) • Max. torque: 70 / 48 Nm • Tool holder: BT 40 Work table: • Clamping area: 800 x 320 mm • Max. table load: 300 kg • T-slots: 3x 14 x 100 mm Automatic tool changer (ATC): • Number of positions: 12 positions (carousel) • Max. tool diameter: 70 mm • Max. tool weight: 6.0 kg • Tool change time: only 7.0 seconds (tool-to-tool) Ljdszkhvrjpfx Akqehn Dynamics & accuracy: • Rapid traverse (X / Y / Z): 10 m/min • Feed rate max.: 10,000 mm/min • Repeatability: +/- 0.008 mm • Positioning accuracy: +/- 0.01 mm Connection and space requirements: • Total power requirement: 15 kVA • Machine weight: approx. 2,900 kg • Space requirement (L x W x H): approx. 3.5 x 2.5 x 2.4 m _____ Scope of delivery: • CNC vertical machining center OPTImill F 105 CNC • RENISHAW measuring probe • Integrated 12-position tool changer • Efficient chip removal system • Powerful coolant system with coolant pump • Complete, original documentation/manual Are you interested? A demonstration under power can be arranged.

Condition: used, Year of construction: 1988, Deckel FP4MA 2204 – CNC Machining Center - General overhaul in 2022 - Heidenain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with retractable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearbox - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling in the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools, and tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm Lhsdpfx As Adr R Dokqsn - Vertical milling head manually adjustable on spindle head: 150 mm Main drive: - Pole-changing three-phase brake motor: Gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Spindle speed: 63 - 3150 rpm (18 steps) - Step jump: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table carriage: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (with safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and rotary table: approx. 1830 kg - Operating voltage: 400 V - Total connection value: 12.5 kVA - Floor load: 3000 kg/m²