Used Oku for sale (265)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R Gtedpfx Ajxxifkebreu # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm Gtedpfx Aoxxidaobrju - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment Gtjdpfjxxh Udsx Abrou - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system Gedpsxxiiisfx Abrotu - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor Gjdpfx Absxxihferetu - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck Gjdpfx Abox Ed A Dorotu 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), functionality: fully functional, turning length: 2,000 mm, For Sale: Okuma LB35 II – CNC Turning Center (Year 1997) Manufacturer: Okuma Model: LB35 II Year: 1997 Control Unit: Okuma OSP-7000L Technical Specifications Capacity Turning length (distance between centers): 2070 mm Maximum turning diameter: 460 mm Swing over bed: 700 mm Spindle bore: 90 mm Axis Travels Z-axis travel: 2070 mm X-axis travel: 330 mm Spindle Spindle speed range: 14 – 3200 rpm Spindle nose: A2-8 Chuck size: 18" Turret & Tooling Tool turret: 12-station Tool interface: VDI50 Gjdpfx Abjx Dx E Rsrjtu Tool holders: several included (exact quantity available on request) Tailstock Tailstock type: MT5 taper Dimensions & Weight Machine length: 6000 mm Machine width: 4100 mm Machine height: 2700 mm Machine weight: approx. 10,000–10,500 kg Included Equipment Chip conveyor Assorted tool holders and jaw sets Check the details with the seller! Ask for a quote including transportation!

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires! Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse, 380v available), we can ask Okuma to make a test report if required. Free loading on truck. Transport can also be arranged in the EU. As new condition, 930 hours on spindle, new 300.000 euro's, so a 125.000 saving on an as-new machine with Gtedpowzzrkjfx Abrju

Condition: good (used), Year of construction: 2021, functionality: fully functional, Description: The machine is in good technical condition and can be tested by prior arrangement. Accessories include: tool holders, tailstock centers, 7 driven tools, tool probe. Available for delivery – 03-04/2026. Gtodpfxjx H Ifbe Abrju

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), Gtjdpfx Ajwgcb Dsbrsu and oil/water separator, bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, excluding transport, subject to prior sale.

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air Godpovl Ev Asfx Abretu as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, Gtsdovl Euxjpfx Abrju tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, Gtodpforxcylex Abrsu manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Condition: new, Year of construction: 2024, machine/vehicle number: L24110255, HoKuTech band saw HoKu BS 640 AS with lower and upper "blue Gruber guide" Work table dimensions 600 x 885 x 840 mm, Flywheel D = 640 mm, max. cutting height 400 mm, max. cutting width 620 mm, Inclination of the work table 0° - 20°, Band saw blade length 4,770 - 4,810 mm, Band width 8 - 35 mm, Motor 2.2 kW (3 HP), Extraction nozzle 2 x D = 120 mm Dimensions 1,050 x 720 x 2,180 mm, Weight approx. 300 kg, Gtedpfx Aevmw Ugebreu from the Seevetal location, as viewed, without transport, subject to prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Maximum cutting height with 450 mm saw blade: at 90°: 155 mm, at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Extraction ports D = 120 + 80 mm Mitre fence extendable to 3,600 mm Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment Motors: Main saw: 5.5 kW / 7.5 HP, Scoring unit with motor: 0.55 kW / 0.75 HP Gsdpowz Nbasfx Abrotu Sliding carriage made of anodized aluminium, including high-precision linear guide made of hardened and ground steel Sliding carriage lockable in any position Saw blade guard with swing-away device Outrigger arm with adjustable mitre fence and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices in accordance with CE standards As inspected, ex location Seevetal, without pre-freight, freight, or commissioning. Subject to prior sale.

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Turret: 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Gedpfxjxg Itve Abrjtu Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU3000EX, Power kVA: 34.2 Gtedpfx Asx Hg Eyebrou

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Gedpegz Hx Defx Abretu Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC Gtsdpfxoxmaf Rs Abrsu number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: used, TECHNICAL DETAILS Gtsdpfx Abexz Hrgereu - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 50- 6.000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 580 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Z stroke : 390 [mm] - X stroke : 260 [mm] - Tool type : V12 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 38 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.200 x 1.734 [mm] - Machine height : 1.839 [mm] - Machine weight : 3.400 [kg] MACHINE HOURS - Number of hours under power : 23.682 [h] - Number of working hours : 11.795 [h] - Number of spindle hours : 7.225 [h] EQUIPMENT - CNC : OKUMA OSP-P200 LA - Interface : Ethernet / RS232 / USB - Interactive programming : Advanced One Touch IGF-L V302A - 3 colors status lamp - Coolant tank - Chips conveyor : Droite MAYFRAN - Tool probe : manuel - Parts catcher - Bar loader : FMB 5-55 /3200 - Electric transformer - Collet chuck : Nann KSF 40/6 -6000 t/min - Collet chuck : TYPE 173E/48F Ø de barre max 42 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Gtedpfsxnlh Tsx Abreu Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm X-axis travel: 210 mm Y-axis travel: 330 mm C-axis travel (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Feeder belt Three pallets Note: The tool holders and tools visible in the working area are not included in the scope of delivery or sale. Any oil mist extraction unit or pallets shown on the feeder belt in the photos are also not included in the sale or delivery.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock Gedpfxjxxi Uls Abretu

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127728, Okuma MULTUS B300 5-Axis CNC Turning and Milling Center (2006) Okuma OSP-P200L controls Renishaw Probe Chip Auger Under maintenance / parts missing Gjdox Ap A Dopfx Abretu Sublocation - Building 3

Condition: used, Year of construction: 2005, CNC Horizontal Machining Center OKUMA MA-400H (Year 2005) Condition: Good, the machine is connected and can be seen in operation. Manufacturer: OKUMA Corporation (Japan) Model: MA-400H Year of manufacture: 2005 Scope of supply: Complete with Tsubakimoto / Mayfran Inc. chip conveyor and full assembly system. High-class CNC horizontal machining center designed for precise milling, drilling, and tapping of metal parts. An excellent choice for series production where performance, accuracy, and reliability are critical. Main technical specifications: (based on OKUMA MA-400H model specification) Control system: OKUMA OSP-E100H Working travel (X / Y / Z): 560 × 560 × 625 mm Table: 400 × 400 mm (2-position pallet changer) Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Max. table load: 400 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Spindle motor: 15/11 kW Tool changer: 60 positions (automatic) Chip conveyor: Tsubakimoto / Mayfran Inc. – integrated Cooling: integrated cooling system Approximate weight: 11,000 kg Application: The OKUMA MA-400H is intended for the machining of medium and high-precision components in the automotive, mold, tooling, machine-building, and metal industries. Ideally suited for versatile machining – with automatic pallet changing, it enables operator-free production. Gjdpfxsxql Das Abretu If you have any further questions, please feel free to contact us.

Condition: new, Sawblade tiltable 0 - 45 ° Length of the rolling table 3.200/3350 mm cutting width 1.100 mm Motor output 5,5 kW Cutting height 155 mm Cutting height at 45° 110 mm Saw blade diameter 450 mm Speed 3.000/3.600/4.200 U/min. Gtedsxmk A Topfx Abreu Dust suction hood 1x120 , 1x80 mm